• Kepware Drivers
  • Welcome to Kepware Drivers
  • A Drivers
    • ABB Totalflow Driver
      • Overview
      • Setup
        • Channel Properties
          • Channel Properties — General
          • Channel Properties — Serial Communications
          • Channel Properties — Write Optimizations
          • Channel Properties — Advanced
          • Channel Properties — Communication Serialization
        • Device Properties
          • Device Properties — General
          • Device Properties — Scan Mode
          • Device Properties — Timing
          • Device Properties — Auto-Demotion
          • Device Properties — Tag Generation
          • Device Properties — Time Synchronization
          • Device Properties — Settings
          • Device Properties — EFM Meters
          • Device Properties — Trend
      • Automatic Tag Database Generation
      • Data Types Description
      • Address Descriptions
        • Characteristic Address Descriptions
        • DB2 Protocol Address Descriptions
        • Trend Address Descriptions
        • Statistics Items
        • EFM Pointer Rollback
      • Error Descriptions
        • A communication error occurred while <reading/writing> address <tag address> on device <device name>: <verbose communication error>.
        • A communication error occurred while reading address <tag address> on device <device name>: Device did not respond.
        • A communication error occurred while reading address <tag address> on device <device name>: General remote NACK error.
        • A communication error occurred while reading address <tag address> on device <device name>: Illegal register read or write.
        • A communication error occurred while reading address <tag address> on device <device name>: Invalid data structure.
        • A communication error occurred while reading address <tag address> on device <device name>: Received data had a CRC error.
        • A communication error occurred while reading address <tag address> on device <device name>: Transaction ID did not match.
        • A communication error occurred while reading register block <tag address 1 - tag address 2> on device <device name>: Invalid VCB Array.
        • Bit index out of range for register address <tag address> on device <device name>.
        • Configuration Invalid XML document: XML Validation Error. Failed to parse.
        • Could not write data for trend file <trend file> on device <device> to disk: <reason>.
        • <Device name> - Failed to read EFM pointer file. <Extended error>.
        • <Device name> - Failed to read trend pointer file. <Extended error>.
        • <Device name> - Failed to write EFM pointer file. <Extended error>.
        • <Device name> - Failed to write trend pointer file. <Extended error>.
        • Device <device name> is not responding.
        • EFM meter <meter name> on device <device name> is invalid.
        • Max. sequence number of 0 reported from device. Cancelling <EFM history type> poll.
        • EFM type mismatch for meter <meter name> on device <device name>. The meter is configured for <meter type> in the server but it is a <meter type> meter in the device.
        • Extra data revision not supported. The EFM output file for <meter name> on device <device name> will be missing some data. Extra data revision = <extra data revision>, extra data size = <extra data size>
        • Extra data size is 0 bytes. The EFM output file for <meter name> on device <device name> will be missing some data. Extra data revision = <extra data revision>, extra data size = <extra data size>
        • Failed to send communication request for address <tag address> on device <device name>.
        • Invalid address for register block <App>.<Array>.<Register X> - <App>.<Array>.<Register Y> on device <device name>.
        • Invalid data type <data type> for address <tag address> for device <device name>.
        • Register blocking error, verify that data type <data type> is valid for address <tag address> on device <device name>.
        • Serialization of EFM data to temporary file <file name> failed. Reason: <file I/O error>.
        • The rollback value has been adjusted to match the archive size because it exceeded the size of the archive. | Adjusted rollback = <size>, archive = <name>.
        • Trend file configuration changed for trend file <trend file> on device <device>. Old data moved to <file name>. New data written to <file name>.
        • Trend file <trend file name> does not exist on device <device name>.
        • Trend upload expected new records for trend file <trend file> on device <device name>, but no records were retrieved.
        • Unable to automatically generate trend tags for device '<device name>'. Reason: No trend files found on device.
        • Unable to load TCI Toolkit extradata.ini file, EFM feature may not work properly.
        • Unable to write to <address> on device <device name>.
    • Acroloop CIP Ethernet
      • Overview
      • Device Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Communication Parameters
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
      • Automatic Tag Generation
      • Address Descriptions
      • Error Codes
        • Encapsulation Error Codes
        • CIP Error Codes
        • 0x0001 Extended Error Codes
        • 0x001F Extended Error Codes
      • Error Descriptions
        • Encapsulation error occurred during a request to device '<IP address>'
        • Memory could not be allocated for tag with address '<address'> on device '<device name>'
        • Read request for '<count>' elements starting at '<address>' on device '<device>' failed due to a framing error
        • Read request for tag '<tag address>' on device '<device name>' failed due to a framing error
        • Unable to bind to adapter: '<name>'. Connect failed
        • Unable to read '<count>' elements starting at '<address>' on device '<device name>'
        • Unable to read tag '<tag address>' on device '<device name>'
        • Unable to write to tag '<tag address>' on device '<device name>'
        • Winsock initialization failed (OS Error = <socket>)
        • Write request for tag '<tag address>' on device '<device name>' failed due to a framing error
    • Advanced Simulator
      • Overview
      • External Dependencies
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Data Source Settings
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Table Selection
        • Device Properties — Timing
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address.
          • Device address <address> contains a syntax error.
          • Data Type <type> is not valid for device address <address>.
          • Device address <address> is read only.
          • Array support is not available for the specified address: <address>.
        • Device Status Messages
          • Write request rejected on read-only item reference <channel name><device name><address>.
        • Advanced Simulator Driver Specific Messages
          • Unable to retrieve table names.
          • Unable to retrieve table column names.
          • Unable to retrieve table row count.
        • Runtime
          • Unable to connect to data source on channel <channel name>.
          • Data source <data source name> is configured as Read Only (all writes will be rejected).
          • Unable to open recordset on device <device name>.
          • Unable to query recordset on device <device name>.
          • Unable to retrieve database value for tag <tag address> on device <device name>.
          • Unable to read internal tag <tag address> on device <device name>.
          • Unable to write to internal tag <tag address> on device <device name>
    • Allen-Bradley Bulletin 900
      • Overview
      • Setup
        • Channel Setup
          • Channel Properties — General
          • Channel Properties — Serial Communications
          • Channel Properties — Write Optimizations
          • Channel Properties — Advanced
        • Device Setup
          • Device Properties — General
          • Device Properties — Scan Mode
          • Device Properties — Timing
          • Device Properties — Auto-Demotion
          • Device Properties — Tag Generation
          • Device Properties — Value Scaling
      • Automatic Tag Database Generation
      • Device <device name> is not responding.
      • Address Descriptions
      • Error Descriptions
        • Address <address> is out of range for the specified device or register.
        • Communications error on <channel name> [<error mask>].
        • COMn does not exist.
        • COMn is in use by another application.
        • Data Type <type> is not valid for device address <address>.
        • Device address <address> contains a syntax error.
        • Device address <address> is not supported by model <model name>.
        • Device address <address> is read only.
        • Device <device name> is not responding.
        • Device <device name> responded with error.(Tag <tag address>).
        • Error opening COMn.
        • Missing address.
        • Unable to generate a tag database for device <device name>.
        • Unable to set comm parameters on COMn.
        • Unable to write to <address> on device <device name>.
        • Allen-Bradley 900 Error Code List
    • Allen-Bradley 1609 UPS
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Communication Parameters
        • Device Properties — Community Setup
        • Device Properties — Maximum Request Size
        • Device Properties — Error Handling
      • Automatic Tag Database Generation
      • Data Types Description
      • Address Descriptions
        • Address Descriptions
        • Address Descriptions for Bulletin 1609 Model
      • Trap Messages
      • Error Descriptions
      • Address Validation
        • Missing address.
        • Device address <address> contains a syntax error.
        • Address <address> is out of range for the specified device or register.
        • Device address <address> is not supported by model <model name>.
        • Data type <type> is not valid for device address <address>.
        • Device address <address> is read only.
      • Communication Messages
        • Winsock V1.1 or higher must be installed.
      • Device Status Messages
        • Device <device name> is not responding.
        • Unable to write to <address> on device <device name>.
      • Device Specific Messages
        • Failed to get response from device <device> for block tag <tag>.
        • Failed to get response from device <device> for tag <tag>.
        • Failed to send request for address <address> in device <device>.
        • Failed to send request for block tag <tag> in device <device>.
        • The address <address> is configured as Read Only in device <device>.
        • The request size or the returned value for object ID <ID> in device <device> is too large.
        • The returned/write value for block ID <ID> in device <device> is too large.
        • The value written is not allowed at address <address> in device <device>.
        • UPS returned 'general error' for <address> in device <device>.
        • UPS returned 'no such name' error on block tag <tag> in device <device>. Deactivating block tag <tag>.
        • UPS returned 'no such name' error on <tag> in device <device>. Deactivating <tag>.
        • UPS returned unknown error for block tag <tag> in device <device>. Error number = <number>.
        • UPS returned unknown error for <address> in device <device>. Error number = <number>.
      • Automatic Tag Database Generation Messages
        • Unable to generate a tag database for device <device name>.
    • Allen-Bradley ControlLogix Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — Identification
        • Operating Mode
        • Device Properties — Scan Mode
        • Tag Counts
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Logix Communications Parameters
        • Device Properties — Logix Options
        • Device Properties — Logix Database Settings
        • Device Properties — ENI DF1/DH+/ControlNet Gateway Communications Parameters
          • Block Writes
        • Device Properties — SLC 500 Slot Configuration
        • SLC 500 Modular I/O Selection Guide
      • Configuration API ControlLogix Examples
        • Enumerations
          • Device Model Enumerations
        • Configuration API — Slot Configuration
      • Automatic Tag Database Generation
        • Tag Hierarchy
        • Controller-to-Server Name Conversions
        • Preparing for Automatic Tag Database Generation
      • Performance Optimizations
        • Optimizing Communications
        • Optimizing the Application
        • Performance Statistics and Tuning
        • Performance Tuning Example
      • Data Types Description
        • Default Data Type Conditions
      • Address Descriptions
        • Logix Addressing
        • MicroLogix Addressing
        • SLC 500 Fixed I/O Addressing
        • SLC 500 Modular I/O Addressing
        • PLC-5 Series Addressing
        • Logix Tag-Based Addressing
          • Logix Tag-Based Addressing
          • Address Formats
          • Tag Scope
          • Internal Tags
          • Predefined Term Tags
        • Address Usage
          • Addressing Atomic Data Types
          • Addressing Structure Data Types
          • Addressing STRING Data Type
          • Ordering of Logix Array Data
          • Logix Advanced Addressing
            • Advanced Addressing: BOOL
            • Advanced Addressing: SINT
            • Advanced Addressing: INT
            • Advanced Addressing: DINT
            • Advanced Addressing: LINT
            • Advanced Addressing: REAL
            • Advanced Addressing: USINT
            • Advanced Addressing: UINT
            • Advanced Addressing: UDINT
            • Advanced Addressing: ULINT
            • Advanced Addressing: LREAL
            • Advanced Addressing: TIME32
            • Advanced Addressing: TIME
            • Advanced Addressing: LTIME
        • DF1 File Listing
          • File Listing
          • Output Files
          • Input Files
          • Status Files
          • Binary Files
          • Timer Files
          • Counter Files
          • Control Files
          • Integer Files
          • Float Files
          • ASCII Files
          • String Files
          • BCD Files
          • Long Files
          • MicroLogix PID Files
          • PID Files
          • MicroLogix Message Files
          • Message Files
          • Block Transfer Files
        • Function File Listing
          • Function Files
          • High-Speed Counter File (HSC)
          • Real-Time Clock File (RTC)
          • Channel 0 Communication Status File (CS0)
          • Channel 1 Communication Status File (CS1)
          • I/O Module Status File (IOS)
      • Error Codes
        • Encapsulation Error Codes
        • CIP Error Codes
          • 0x0001 Extended Error Codes
          • 0x001F Extended Error Codes
          • 0x00FF Extended Error Codes
      • Event Log Messages
        • Event Log Messages
      • Appendices
        • Appendix A — Channel Properties
        • Appendix B — Device Properties
        • Appendix C — Tag Properties
        • Logix Device IDs
        • 1761-NET-ENI
        • DataHighwayPlus (TM) Gateway
        • ControlNet Gateway
        • EtherNet/IP Gateway Setup
        • Serial Gateway Setup
        • MicroLogix 1100 Setup
        • Communications Routing
          • Connection Path Specification
          • Routing Examples
        • Choosing a Protocol Mode
        • Detecting a Change in the Controller Project
        • SoftLogix 5800 Connection Notes
    • Allen-Bradley ControlLogix Ethernet for Edge
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — Identification
        • Operating Mode
        • Device Properties — Scan Mode
        • Tag Counts
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Logix Communications Parameters
        • Device Properties — Logix Options
        • Device Properties — Logix Database Settings
        • Device Properties — ENI DF1/DH+/ControlNet Gateway Communications Parameters
          • Block Writes
        • SLC 500 Slot Configuration
        • SLC 500 Modular I/O Selection Guide
      • Configuration API ControlLogix Examples
        • Enumerations
          • Device Model Enumerations
        • Configuration API — Slot Configuration
      • Automatic Tag Database Generation
        • Tag Hierarchy
        • Controller-to-Server Name Conversions
        • Preparing for Automatic Tag Database Generation
      • Performance Optimizations
        • Optimizing Communications
        • Optimizing the Application
      • Data Types Description
        • Default Data Type Conditions
      • Address Descriptions
        • Logix Addressing
        • MicroLogix Addressing
        • SLC 500 Fixed I/O Addressing
        • SLC 500 Modular I/O Addressing
        • PLC-5 Series Addressing
        • Logix Tag-Based Addressing
          • Logix Tag-Based Addressing
          • Address Formats
          • Tag Scope
          • Internal Tags
          • Predefined Term Tags
        • Address Usage
          • Addressing Atomic Data Types
          • Addressing Structure Data Types
          • Addressing STRING Data Type
          • Ordering of Logix Array Data
          • Logix Advanced Addressing
            • Advanced Addressing: BOOL
            • Advanced Addressing: SINT
            • Advanced Addressing: INT
            • Advanced Addressing: DINT
            • Advanced Addressing: LINT
            • Advanced Addressing: REAL
            • Advanced Addressing: USINT
            • Advanced Addressing: UINT
            • Advanced Addressing: UDINT
            • Advanced Addressing: ULINT
            • Advanced Addressing: LREAL
            • Advanced Addressing: TIME32
            • Advanced Addressing: TIME
            • Advanced Addressing: LTIME
        • DF1 File Listing
          • File Listing
          • Output Files
          • Input Files
          • Status Files
          • Binary Files
          • Timer Files
          • Counter Files
          • Control Files
          • Integer Files
          • Float Files
          • ASCII Files
          • String Files
          • BCD Files
          • Long Files
          • MicroLogix PID Files
          • PID Files
          • MicroLogix Message Files
          • Message Files
          • Block Transfer Files
        • Function File Listing
          • High-Speed Counter File (HSC)
          • Real-Time Clock File (RTC)
          • Channel 0 Communication Status File (CS0)
          • Channel 1 Communication Status File (CS1)
          • I/O Module Status File (IOS)
      • Error Codes
        • Encapsulation Error Codes
        • CIP Error Codes
          • 0x0001 Extended Error Codes
          • 0x001F Extended Error Codes
          • 0x00FF Extended Error Codes
      • Event Log Messages
        • Event Log Messages
      • Appendices
        • Appendix A — Channel Properties
        • Appendix B — Device Properties
        • Appendix C — Tag Properties
        • Logix Device IDs
        • 1761-NET-ENI
        • DataHighwayPlus (TM) Gateway
        • ControlNet Gateway
        • EtherNet/IP Gateway Setup
        • Serial Gateway Setup
        • MicroLogix 1100 Setup
        • Communications Routing
          • Connection Path Specification
          • Routing Examples
        • Choosing a Protocol Mode
        • Detecting a Change in the Controller Project
        • SoftLogix 5800 Connection Notes
    • Allen-Bradley ControlLogix Server
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — EtherNet/IP Module
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
        • Device Properties — Controller Module
        • Device Properties — Native Tag Database
          • Tag Hierarchy
        • Device Properties — Options
        • ControlLogix Client Device Configuration
      • Logix Config Object
        • Logix Config CSV Import
        • Defining New Logix Addresses
      • Data Types Description
      • Address Descriptions
        • Address Formats
        • Tag Scope
        • Advanced Addressing
      • Error Codes
        • EtherNet/IP Encapsulation Error Codes
        • CIP Error Codes
        • 0x01 Extended Error Codes
        • 0xFF Extended Error Codes
      • Event Log Messages
        • Event Log Messages
    • Allen-Bradley DF1
      • Overview
      • Cable Connections
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Channel Properties — Link Settings
          • Half Duplex Client
          • KF2/KF3 Half Duplex Client
      • Device Setup
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Ethernet Encapsulation
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Protocol Settings
          • Float Words
        • Device Properties — Function File Options
        • Slot Configuration
          • Modular I/O Selection Guide
      • Data Types Description
      • Address Descriptions
        • File Listing
          • Output Files
          • Input Files
          • Status Files
          • Binary Files
          • Timer Files
          • Counter Files
          • Control Files
          • Integer Files
          • Float Files
          • ASCII Files
          • String Files
          • BCD Files
          • Long Files
          • Micrologix PID Files
          • PLC5 PID Files
          • Micrologix Message Files
          • PLC5 Message Files
          • Block Transfer Files
        • Function File Listing
          • High Speed Counter File (HSC)
          • Real-Time Clock File (RTC)
          • Channel 0 Communication Status File (CS0)
          • Channel 1 Communication Status File (CS1)
          • I/O Module Status File (IOS)
      • Event Log Messages
        • Event Log Messages
        • Error Mask Definitions
      • Communicating with RSLogix5000 Family Controllers
    • Allen-Bradley Ethernet Driver
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Device Properties — Identification
        • Operating Mode
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Communications Parameters
        • Device Properties — Protocol Parameters
        • Device Properties — Slot Configuration
      • Modular I/O Selection Guide
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • General Addressing
          • Output Files
          • Input Files
          • Status Files
          • Binary Files
          • Timer Files
          • Counter Files
          • Control Files
          • Integer Files
          • Float Files
          • ASCII Files
          • String Files
            • String Length
        • SLC5/05 Open Addressing
        • PLC-5 Family Addressing
          • BCD Files
          • PID Files
          • Message Files
          • Block Transfer Files
      • Event Log Messages
        • Event Log Messages
    • Allen-Bradley Micro800 Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Communications Parameters
        • Device Properties — Options
      • Performance Optimizations
        • Optimizing Communications
        • Optimizing Your Application
      • Data Types Description
      • Address Descriptions
        • Address Formats
        • Tag Scope
        • Address Usage
          • Addressing Atomic Data Types
          • Addressing Structured Data Types
          • Ordering of Array Data
        • Advanced Addressing
          • Advanced Use Cases
          • BOOL
          • SINT, USINT, and BYTE
          • INT, UINT, and WORD
          • DINT, UDINT, and DWORD
          • LINT, ULINT, and LWORD
          • REAL
          • LREAL
          • SHORT_STRING
      • Error Codes
        • Encapsulation Protocol Error Codes
        • CIP Error Codes
          • 0x0001 Extended Error Codes
          • 0x001F Extended Error Codes
          • 0x00FF Extended Error Codes
      • Event Log Messages
        • Event Log Messages
      • Glossary
    • Allen-Bradley Micro800 Serial
      • Overview
      • Device Setup
      • Channel Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Channel Properties — Ethernet Encapsulation
        • Channel Properties — Link Settings
        • Channel Creation Wizard
        • Device Discovery Procedure
      • Device Setup
        • Device Properties — General
        • Device Properties — Ethernet Encapsulation
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Communications Parameters
        • Device Properties — Options
        • Device Creation Wizard
      • Performance Optimizations
        • Optimizing Communications
        • Optimizing Application
      • Data Types Description
      • Address Descriptions
        • Address Formats
        • Tag Scope
        • Address Usage
          • Addressing Atomic Data Types
          • Addressing Structured Data Types
          • Addressing STRING Data Type
          • Ordering of Array Data
        • Advanced Addressing
          • Advanced Use Cases
          • BOOL
          • SINT, USINT, and BYTE
          • INT, UINT, and WORD
          • DINT, UDINT, and DWORD
          • LINT, ULINT, and LWORD
          • REAL
          • LREAL
          • SHORT_STRING
      • Error Codes
        • Encapsulation Protocol Error Codes
        • CIP Error Codes
          • 0x0001 Extended Error Codes
          • 0x001F Extended Error Codes
          • 0x00FF Extended Error Codes
      • Event Log Messages
        • Event Log Messages
      • Glossary
    • Allen-Bradley Server Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Communication Parameters
        • Device Properties — Options
      • Allen-Bradley PLC Client Device Configuration
      • Data Types Description
      • Address Descriptions
      • Event Log Messages
        • Event Log Messages
    • Alstom Redundant Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Network Interface
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Device ID
        • Device Properties — Blocks
        • Device Properties — Redundancy Settings
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Modbus Exception Codes
        • Address Validation
          • Address <address> is out of range for the specified device or register
          • Array size is out of range for address <address>
          • Array support is not available for the specified address: <address>
          • Data Type <type> is not valid for device address <address>
          • Device address <address> contains a syntax error
          • Device address <address> is not supported by model <model name>
          • Device address <address> is Read Only
          • Missing address
        • Device Status Messages
          • Device <device name> is not responding
          • Unable to bind to adapter: <network adapter name>. Connect failed
          • Unable to create a socket connection for device <device name>
          • Unable to write to address <address> on device <device>: Device responded with exception code <code>
        • Device Specific Messages
          • Bad address in block [x to y] on device <device name>
          • Bad array spanning [<address> to <address>] on device <device name>
          • Bad received length [x to y] on device <device name>
          • Failure to initiate 'winsock.dll' [Error: <winsock error>]
    • Analog Devices
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Driver Setup
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Data Format
      • Data Types Description
      • Address Descriptions
        • 6B11 Addresses
        • 6B12 Addresses
        • 6B13 Addresses
        • 6B21 Addresses
        • 6B50 Addresses
      • Error Descriptions
        • Address Validation
          • Address <address> is out of range for the specified device or register.
          • Data type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is not supported by model <model name>.
          • Device address <address> is read only.
          • Missing address.
        • Serial Communications
          • Communications error on <channel name> [<error mask>].
          • Error Mask Definitions
          • COMn does not exist.
          • COMn is in use by another application.
          • Error opening COMn.
          • Unable to set comm parameters on COMn.
        • Device Status Messages
          • Device <device name> is not responding.
          • Unable to write to <address> on device <device name>.
        • Device Specific Messages
          • Value out of range writing to address <address> on device <device name>.
    • Aromat Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
      • Data Types Description
      • Address Descriptions
        • C16 Addressing
        • C24 Addressing
        • C40 Addressing
        • Any FP Model Addressing
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Data type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is not supported by model '<model name>'
          • Device address '<address>' is read only
          • Missing address
        • Serial Communications
          • Communications error on '<channel name>' [<error mask>]
          • COMn does not exist
          • COMn is in use by another application
          • Error opening COMn
          • Unable to set comm properties on COMn
        • Device Status Messages
          • Device '<device name> not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Unable to read block for address type '<mnemonic>', words <start address> - <end address>, on device '<device>'
    • Help Contents
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Communications Properties
        • Device Properties — Station Numbers
        • Device Properties — Request Size
        • ET-LAN Connection Properties
        • Multi-Homing
      • Data Types Description
      • Address Descriptions
      • Optimizing Communications
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only.
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the Aromat Ethernet device driver
          • Unable to bind IP '<IP in hex>' to port '<port>' - address is in use by another application
          • Response to <read/write> request to '<tag address>' on device '<device name>' contained error code '<xx>'
          • Response to <read/write> request to '<tag address>' on device '<device name>' had an unexpected format
          • Response to <read/write> request to '<tag address>' on device '<device name>' failed BCC check
    • AutomationDirect DirectNET
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Tag Import Settings
      • Automatic Tag Database Generation
        • Tag Hierarchy
        • Import File-To-Server Name Conversions
        • Importing DirectSoft Elements
          • Import Preparation: DirectSoft Steps
          • Import Preparation: OPC Server Steps
      • Data Types Description
        • Address Descriptions
          • DL-05 Addressing
          • DL-06 Addressing
          • DL-230 Addressing
          • DL-240 Addressing
          • DL-250(-1) Addressing
          • DL-260 Addressing
          • DL-330 Addressing
          • DL-340 Addressing
          • DL-350 Addressing
          • DL-430 Addressing
          • DL-440 Addressing
          • DL-450 Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm properties on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name> not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Bad address in block [<start address> to <end address>] on device '<device name>'
        • Automatic Tag Database Generation Messages
          • Unable to generate a tag database for device <device name>
          • Unable to generate a tag database for device <device name>. Reason: Import file is invalid
    • AutomationDirect EBC
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Link Configuration
        • Device Properties — Communication Settings
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • H2-EBC(-F) Addressing
        • H4-EBC(-F) Addressing
        • Terminator I/O Addressing
        • GS Drive Addressing
        • I/O Addressing
          • H2-EBC(-F) I/O Addressing
          • H4-EBC(-F) I/O Addressing
          • Terminator I/O I/O Addressing
        • Serial Port Addressing
          • H2, H4, Terminator I/O Serial Port Addressing
        • Serial Port Addresses
          • Serial Port Configuration
            • Serial Port Configuration: Baud Rate
            • Serial Port Configuration: #Data Bits
            • Serial Port Configuration: Parity
            • Serial Port Configuration: #Stop Bits
            • Serial Port Configuration: Mode
            • Serial Port Configuration: Use RTS Line
            • Serial Port Configuration: Pre-Transmit Delay
            • Serial Port Configuration: Post-Transmit Delay
        • GS Drive Addressing
          • GS Drive Parameter Addressing
          • GS Drive Status Addressing
      • Module Hot Swapping
      • Error Descriptions
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the AutomationDirect EBC device driver
          • Memory allocation error
        • Driver Warning Messages
          • Device '<device name> is not responding
          • Unable to write to '<address>' on device '<device name>'
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Device address '<address>' is Read Only
          • Data type '<type>' is not valid for device address '<address>'
          • Device <device name> returned an error with value <error value> disabling Link Watchdog. All tags will be invalidated
          • Device <device name> returned an error with value <error value> enabling Link Watchdog with timeout <timeout>. All tags will be invalidated
        • Read Errors
          • Address '<address>' is out of range for device '<device name>'. Tag Deactivated
          • Base referenced in address '<address>' on device '<device name>' does not exist. Tag Deactivated
          • Module referenced in address '<address>' on device '<device name>' does not exist. Tag Deactivated
          • Address type invalid for address '<address>' on device '<device name>'. Tag Deactivated
          • Device '<device name>' returned an error code with value = '<value>' reading address '<address>'
          • Device '<device name>' : Base '<base>' : Slot '<slot>' returned an error with value = '<error value>'
          • Device '<device name>' : Base '<base>' : Slot '<slot>' returned a warning with value = '<warning value>'
          • Device '<device name>' : Base '<base>' : Slot '<slot>' returned information with value = '<info value>'
          • Device '<device name>' : Base '<base>' : Slot '<slot>' returned an internal error with value = '<internal value>'
          • Device '<device name>' : Base '<base>' : Slot '<slot>' returned extended error: Type = '<ext err type>', Data = '<error bytes>
          • Frame received from device '<device name>' contains errors
          • Frame received from device '<device name>' contains errors. Verify its IP address
          • Format version of frame received from device '<device name>' is not supported. Tag Deactivated
          • Model selected for device '<device name>' does not match the actual device model. Verify its IP address
          • Device '<device name>' block request [<start> to <end>] responded with exception <code>
          • Bad received length [<start> to <end>] on device '<device name>'
        • Write Errors
          • Write rejected. Address '<address>' is out of range for device '<device name>'
          • Write rejected. Base referenced in address '<address>' on device '<device name>' does not exist
          • Write rejected. Module referenced in address '<address>' on device '<device name>' does not exist
          • Write rejected. Invalid address type for address '<address>' on device '<device name>'
          • Write to address '<address>' failed. Device '<device name>' returned an undefined status code with value = '<value>'
          • Write to address '<address>' failed. Device '<device name>' : Base '<base>' : Slot '<slot>' returned an error with value..
          • Write to address '<address>' failed. Device '<device name>' : Base '<base>' : Slot '<slot>' returned a warning with value..
          • Write to address '<address>' failed. Device '<device name>' : Base '<base>' : Slot '<slot>' returned information with value..
          • Write to address '<address>' failed. Device '<device name>' : Base '<base>' : Slot '<slot>' returned information with value..
          • Write to address '<address>' failed. Device '<device name>' : Base '<base>' : Slot '<slot>' returned an internal error with..
          • Write to address '<address>' failed. Device '<device name>' : Base '<base>' : Slot '<slot>' returned extended error: Type..
          • Write to address '<address>' failed. Frame received from device '<device name>' contains errors
          • Write to address '<address>' failed. Frame received from device '<device name>' contains errors. Verify its IP address
          • Write to address '<address>' failed. Format version of frame received from device '<device name>' is not supported
          • Write to address '<address>' failed. Model selected for device '<device name>' does not match the actual device model..
          • Unable to write to address <address>. Device '<device name>' responded with exception <code>
        • EBC Error Codes
          • EBC Error Codes
      • Application Notes
        • Application Notes: T1F-14THM
        • Application Notes: D4-HSC
    • AutomationDirect ECOM
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communication Parameters
        • Device Properties — Tag Import Settings
      • Automatic Tag Database Generation
        • Tag Hierarchy
        • Import File-To-Server Name Conversions
        • Importing DirectSoft Elements
          • Importing DirectSoft Elements
          • Import Preparation: DirectSoft Steps
          • Import Preparation: OPC Server Steps
      • Optimizing Your AutomationDirect ECOM Communications
      • Data Types Description
      • Address Descriptions
        • DL-05 Addressing
        • DL-06 Addressing
        • DL-240 Addressing
        • DL-250(-1) Addressing
        • DL-260 Addressing
        • DL-430 Addressing
        • DL-440 Addressing
        • DL-450 Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Device Status Messages
          • Device '<device name> not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the AutomationDirect ECOM device driver
          • Bad address in block [<start address> to <end address>] on device '<device name>'
        • Automatic Tag Database Generation Messages
          • Unable to generate a tag database for device <device name>. Reason: Low memory resources
          • Unable to generate a tag database for device <device name>. Reason: Import file is invalid
    • AutomationDirect K Sequence
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Tag Import Settings
      • Automatic Tag Database Generation
        • Tag Hierarchy
      • Data Types Description
      • Address Descriptions
        • DL-05 Addressing
        • DL-06 Addressing
        • DL-105 Addressing
        • DL-230 Addressing
        • DL-240 Addressing
        • DL-250(-1) Addressing
        • DL-260 Addressing
        • DL-350 Addressing
        • DL-430 Addressing
        • DL-440 Addressing
        • DL-450 Addressing
        • SG Series Addressing
        • SL Series Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is read only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm properties on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Bad address in block [<start address> to <end address>] on device '<device name>'
        • Automatic Tag Database Generation Messages
          • Unable to generate a tag database for device <device name>. Reason: Low memory resources
          • Unable to generate a tag database for device <device name>. Reason: Import file is invalid
      • Import File-To-Server Name Conversions
        • Importing DirectSoft Elements
        • Import File-To-Server Name Conversions
        • Import Preparation: DirectSoft Steps
        • Import Preparation: OPC Server Steps
    • AutomationDirect Productivity Series Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communication
        • Data Handling
        • Device Properties — Tag Import File Path
      • Automatic Tag Database Generation
      • Optimizing AutomationDirect Productivity Series Ethernet Communications
      • Data Types Description
      • Address Descriptions
        • Ordering of Array Data
        • Address Formats
      • Error Descriptions
        • Automatic Tag Database Generation Error Messages
          • Tag name <tag name> encountered validation error and will not be imported.
          • Unable to generate a tag database for device <device name>. Reason: Auto tag generation cancelled.
          • Unable to generate a tag database for device <device name>. Reason: Import file is invalid or corrupt.
          • Unable to generate a tag database for device <device name>. Reason: Import file not found.
          • Unable to generate a tag database for device <device name>. Reason: Low memory resources.
        • Driver Specific Messages
          • Unable to bind to adapter:<network adapter>. Connect failed. Winsock Err# <error number>.
          • Winsock initialization failed (OS Error = <OS error code>).
          • Winsock shut down failed (OS Error = <OS error code>).
          • Winsock V1.1 or higher must be installed to use the Productivity Series Ethernet device driver.
        • Read Errors
          • Cannot read <tag count> items starting at tag <tag address>: address does not exist in device <device name>.
          • Cannot read <tag count> items starting at tag <tag address>: device <device name> returned error code <error code>.
          • Cannot read <tag count> items starting at tag <tag address>: error receiving response frame from device <device name>.
          • Cannot read <tag count> items starting at tag <tag address>: System ID <System ID> does not exist in device <device name>.
          • Cannot read <tag count> items starting at tag <tag address>: value is invalid for data type <data type> in device <device name>.
          • Cannot read tag <tag address>: address does not exist in device <device name>.
          • Cannot read tag <tag address>: device <device name> returned with error code <error code>.
          • Cannot read tag <tag address>: error receiving response frame from device <device name>.
          • Cannot read tag <tag address>: System ID <System ID> does not exist in device <device name>.
          • Cannot read tag <tag address>: value is invalid for data type <data type> in device <device name>.
        • Write Errors
          • Cannot write to tag <tag address>: address does not exist in device <device name>.
          • Cannot write to tag <tag address>: device <device name> returned with error code <error code>.
          • Cannot write to tag <tag address>: error receiving response frame from device <device name>.
          • Cannot write to tag <tag address>: System ID <System ID> does not exist in device <device name>.
          • Cannot write to tag <tag address>: value is invalid for data type <data type> in device <device name>.
        • Modbus Exception Codes
      • Appendix: Exporting a CSV File from Productivity Suite
  • B-C Drivers
    • BACnet/IP
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Protocol Settings
        • Device Discovery Procedure
          • Device Discovery
        • Device Properties — Identification
        • Operating Mode
        • Device Properties — Scan Mode
        • Device Properties — Device Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Protocol Settings
          • APDU
          • Command Settings
          • COV
            • COV Notifications
          • COV Settings
          • Event Notifications
            • Object Instances
            • Event-Related Properties
            • Supported Object Types for Event Notifications
        • Device Properties — Tag Import
        • Device Properties — Discovery
        • Supported Objects and Services
      • Optimizing BACnet/IP Communications
        • Configuring Multiple Channels
      • Data Types Description
        • Enumerated Property Values
      • Address Descriptions
        • Addressing Examples
        • BACnet/IP Objects
          • Accumulator
          • Analog Input
          • Analog Output
          • Analog Value
          • Averaging
          • Binary Input
          • Binary Output
          • Binary Value
          • Calendar
          • Command
          • Device
          • Event Enrollment
          • File
          • Group
          • Life Safety Point
          • Life Safety Zone
          • Loop
          • Multi-State Input
          • Multi-State Output
          • Multi-State Value
          • Notification Class
          • Program
          • Schedule
          • Trend Log
        • String Formats
          • VBA Scripts
            • VBA Scripts for String Parsing and Construction
            • VBA Scripts Usage Example
      • Error Descriptions
        • Cancellation Reasons
        • Reject Reasons
        • Error Classes and Codes
        • Event Log Messages
          • Event Log Messages
      • PIC Statement
    • Beckhoff TwinCAT
      • Overview
      • External Dependencies
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communications Parameters
        • Device Properties — Options
        • Device Properties — Symbolic Settings
      • Automatic Tag Database Generation
      • Optimizing Performance
      • Data Type Descriptions
      • Address Descriptions
        • Symbolic Tag Based Addressing
        • Tag Scope
        • Addressing Atomic Data Types
      • Error Descriptions
        • Error Codes
        • Address Validation
          • Address <address> is out of range for the specified device or register.
          • Array size is out of range for address <address>.
          • Data type <type> is not valid for device address <address>.
          • Device Address ‘<address>’ contains a syntax error.
        • Automatic Tag Database Generation Error Messages
          • Unable to generate a tag database for device <device name>. Reason: Beckhoff TwinCAT ADS DLL necessary for import is not loaded.
          • Unable to generate a tag database for device <device name>. Reason: Device is not responding.
          • Unable to generate a tag database for device <device name>. Reason: Device returned error code <#>.
          • Unable to generate a tag database for device <device name>. Reason: Memory allocation error.
        • Driver Error Messages
          • Unable to import from Beckhoff TwinCAT ADS Communication driver.
          • Unable to load Beckhoff TwinCAT ADS Communication driver.
          • Unable to open a communication port on the ADS router.
        • Device Status Error Messages
          • Device <Device name> is not responding.
          • Monitoring the global variable <tag address> on device <device name> to update symbol information when a change is detected.
          • Unable to gather runtime information for device <device name>. Reason: <reason>.
          • Unable to perform Beckhoff compatibility on device <device name> due to memory allocation error.
          • Unable to synchronize with configuration file <file name> on device <device name> due to memory allocation error.
          • Unable to read tag <tag address> on device <device name>. Requesting symbol information for each transaction.
        • Read Error Messages
          • Unable to read tag <address> on device <device name>. Actual data type is not compatible with tag of type <data type>.
          • Unable to read tag <address> on device <device name>. Address bounds exceeded.
          • Unable to read tag <address> on device <device name>. Beckhoff TwinCAT ADS DLL necessary for runtime is not loaded.
          • Unable to read tag <address> on device <device name>. Error Code <#>.
          • Unable to read tag <address> on device <device name>. Memory allocation error.
          • Unable to read tag <address> on device <device name>. Runtime file is not valid.
          • Unable to read tag <address> on device <device name>. Symbol not found in file.
          • Unable to read tag <address> on device <device name>. Tag data size of <size> bytes(s) exceeds actual data size of <size> byte(s).
          • Unable to read tag <address> on device <device name>. Tag does not meet filtering requirements.
        • Write Error Messages
          • Unable to write to tag <address> on device <device name>. Actual data type is not compatible with tag of type <data type>.
          • Unable to write to tag <address> on device <device name>. Address bounds exceeded.
          • Unable to write to tag <address> on device <device name>. Beckhoff TwinCAT ADS DLL necessary for runtime is not loaded.
          • Unable to write to tag <address> on device <device name>. Error Code <#>.
          • Unable to write to tag <address> on device <device name>. Memory allocation error.
          • Unable to write to tag <address> on device <device name>. Runtime file is not valid.
          • Unable to write to tag <address> on device <device name>. Symbol not found in file.
          • Unable to write to tag <address> on device <device name>. Tag access is Read Only
          • Unable to write to tag <address> on device <device name>. Tag data size of <size> bytes(s) exceeds actual data size of <size> byte(s).
          • Unable to write to tag <address> on device <device name>. Tag does not meet filtering requirements.
      • Technical Notes
        • TwinCAT Memory Warning.
        • TwinCAT Time Slice Notes
      • Appendix — SYSTEMINFO Global Variables in a TwinCAT PLC Project
      • Appendix — TwinCat 3 AMS Route Configuration
    • Bristol/IP
      • Overview
      • BSAP Networks
      • Channel Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Channel Properties — Local Port
      • Device Setup
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communication
        • Device Properties — Timing
        • Device Properties — Tag Import Properties
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • <Operation> on device <device name> signal <signal> caused an overflow. Some data has been lost.
        • <Operation> on device <device name> signal <signal> failed. The device does not contain this signal.
        • <Operation> on device <device name> signal <signal> failed. The device requires higher level permissions to perform this operation.
        • <Operation> on device <device name> signal <signal> failed. The request was malformed or incomplete.
        • A read by address failed because the MSD version for device <device name> changed. The driver is sending read by name requests to get the updated MSD version from the device.
        • A write by address failed because the MSD version for device <device name> changed. The driver is sending a write by name request to the device.
        • Failed to send a request to device <device>. The device is not communicating.
        • Failed to send a request to device <device>. The packet is malformed or too large.
        • Failed to stop Winsock communications.
        • Failure to initiate 'winsock.dll' [Error:<error>].
        • Invalid BSAP function.
        • Read failed on device <device> address <address>. The server expects this address to be of type <type>, but it is of type <type> in the device.
        • The device is not responding.
        • The response received from device <device> contains an invalid sequence number. Review timing properties.
        • The response received from device <device> is malformed.
        • The response received from device <device> is too large (%<count> bytes). The data is lost.
        • The signal was not found.
        • The string written to device <device>, address <address> is too long. The max supported string is <count> characters. The write will continue as is, but the device will truncate the value.
        • Unable to bind to port <port> on Channel <channel>.
        • Unable to create a socket connection for Channel <channel>.
        • Unable to generate a tag database for device <device name>. Reason: Import file does not contain any valid signals.
        • Write to device <device name> signal <signal> failed. The signal's manual inhibit attribute is set to false, not allowing writes.
        • Write to device <device name> signal <signal> failed. The signal is read only.
        • Write to device <device name> signal <signal> failed. The write value is invalid. Make sure the value is within the approved BSAP range.
      • Appendix: Tag Generation
    • BUSWARE Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — TCP/IP
        • Device Properties — Blocks
      • Addressing BUSWARE RS-485 Devices over the Ethernet
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is read only
          • Missing address
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the BUSWARE Ethernet Driver
        • Device Specific Messages
          • Bad address in block [<start address> to <end address>] on device '<device name>'
          • Block size mismatch reading [<start address> to <end address>] on device '<device name>
          • Block request [<start address> to <end address>] on device '<device name>.' responded with exception = n
    • CODESYS
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Parameters
        • Device Discovery Procedure
          • Device Discovery Settings
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
          • Automatic Tag Database Generation
        • Device Properties — Communication Parameters
        • Device Properties — User Credentials
        • Device Properties — Tag Import Settings
      • Performance Optimization
      • Data Types Description
      • Addressing
        • Symbolic Tag-Based Addressing
        • Tag Scope
        • Tag Addressing
        • Nested Structures
        • Arrays
        • Array Elements
        • Bit Addressing
        • Access Privileges
        • Addressing Atomic Data Types
      • Event Log Messages
        • Event Log Messages
    • Contrex Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Device Settings
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Address <address> is out of range for the specified device or register
          • Data Type <type> is not valid for device address <address>
          • Device address <address> contains a syntax error
          • Device address <address> is not supported by model <model name>
          • Device address <address> is Read Only
          • Missing address
        • Serial Communications
          • Communications error on <channel name> [<error mask>]
          • COMn does not exist
          • COMn is in use by another application
          • Error opening COMn
          • Unable to set comm parameters on COMn
        • Device Status Messages
          • Device <device name> is not responding
        • Device Specific Messages
          • Deactivating Tag <address> on device <device name>. Contrex Error (<error code>) <error description>
          • Unable to write to <address> on device <device name>
    • Contrex M-Series
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Device Settings
      • Data Types Description
      • Address Descriptions
        • M-Cut Addressing
        • M-Drive Addressing
        • M-Rotary Addressing
        • M-Shuttle Addressing
        • M-Track Addressing
        • M-Traverse Addressing
        • M-Trim Addressing
        • ML-Drive Addressing
        • ML-Trim Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name>' is not responding
        • Device Specific Messages
          • Unable to write to '<address>' on device '<device name>.' Contrex Error (<error code>) <error description>
          • Deactivating Tag '<address>' on device '<device name>.' Contrex Error (<error code>) <error description>
    • Custom Interface
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Channel Configuration
        • Channel Properties — Support Information
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Auto-Demotion
        • Device Properties — Configuration
        • Device Properties — Settings
        • Device Properties — Timing
      • Data Types Description
      • Address Descriptions
      • Automatic Device/Tag Generation
      • Developer Information
        • CIDA Overview
          • CIDA Requirements
        • Shared Memory Interface
          • REGISTER Structure
          • DATA Structure
          • VALUE Structure
          • STRINGARRAY Structure
        • Reference Implementation
          • Reference Implementation Architecture
          • CID / CIDA Reference Implementation Demonstration
        • Channel Diagnostics
      • Error Descriptions
        • Cannot open shared memory file associated with configuration <configuration name>.
        • Unable to read to register <register offset> on device <device name>. Register corrupted.
        • Unable to read from register <register offset> on device <device name>. Register is not configured for read access.
        • Unable to read from register <register offset> on device <device name>. CIDA <CIDA name> returned error code <error code>.
        • Unable to read from register <register offset> on device <device name>. Register value type is not configured for read data.
        • Unable to write to register <register offset> on device <device name>. Register is not configured for write access.
        • Unable to write to register <register offset> on device <device name>. Register value type is not configured for write data.
        • Unable to write to register <register offset> on device <device name>. CIDA <CIDA name> returned error code <error code>.
        • Unable to write to register <register offset> on device <device name>. Register corrupted.
    • Cutler-Hammer D50/300
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Settings
      • Data Types Description
      • Address Descriptions
        • D50 Addressing
        • D300 Addressing
        • OEMax Addressing
      • Error Descriptions
        • Address Validation Error Messages
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is read only
        • Serial Communications Error Messages
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Error Messages
          • Device '<device name> not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Error Messages
          • Bad address in block [<start address> to <end address>] on device '<device name>'
    • Cutler-Hammer ELC Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Ethernet
        • Device Properties — Block Sizes
        • Device Properties — Data Encoding
      • Optimizing Cutler Hammer ELC Ethernet Communications
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is read only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
          • Unable to write to address '<address>' on device '<device>': Device responded with exception code '<code>'
        • Device Specific Messages
          • Failure to initiate 'winsock.dll' (Error: <error code>)
          • Unable to create a socket connection for device '<device>'
          • Bad array spanning [<start address> to <end address>] on device '<device>'.
          • Bad address in block [<start address> to <end address>] on device '<device>'
          • Device '<device>' block request [<start address> to <end address>] responded with exception <code>
    • Cutler-Hammer ELC Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Driver Setup
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Block Sizes
        • Device Properties — Data Encoding
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>.'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Serial Communications
          • COMn does not exist
          • Error opening COMn.
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
          • Unable to write to address '<address>' on device '<device>': Device responded with exception code '<code>'
        • Device Specific Messages
          • Bad address in block [<start address> to <end address>] on device '<device name>'
          • Bad array spanning ['<address>' to '<address>'] on device '<device name>'
  • D-F Drivers
    • Dataforth isoLynx
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Ethernet
      • Automatic Tag Database Generation
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Dataforth Data Acquisition Library Error Code Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Device Status Messages
          • Device '<Device name>' is not responding
          • Unable to write to '<address>' on device '<device name>.'
        • Driver Error Messages
          • Device '<device name>' responded with error '<Error Code>' (Tag '<address>')
          • Device '<device name>' responded with error '<Error Code>' (Tag '<address>') during Connect
        • Automatic Tag Database Generation Messages
          • Unable to Connect to Device or IO Inquire error during tag Database Creation
    • DDE Client
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — DDE Server Communications
        • ReinitializeDDE Tag
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Address <address> is out of range for the specified device or register.
          • Array support is not available for the specified address: <address>.
          • Data Type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is not supported by model <model name>.
          • Device address <address> is read only.
          • Missing address.
        • Device Status Messages
          • Device <device name> is not responding.
          • Unable to write to <address> on device <device name>. Error code <error code>.
        • DDE Client Driver Specific Messages
          • DDE data error on link <server name>, <topic name>, <item name> detected.
          • DDEML failed to initialize.
          • DDEML reports low memory error.
          • Failed to connect server <server name> topic <topic name>.
          • Failed to establish hot link to <server name>, <topic name>, <item name>.
          • Reinitialization failed.
          • Server <server name> topic <topic name> disconnected
    • DNP Client Ethernet
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Channel Properties — Communications
        • Channel Properties — Timing
          • Timing and Other Considerations
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
          • Automatic Tag Generation Hints
        • Device Properties — Auto-Demotion
        • Device Properties — Communications
        • Device Properties — Polling
        • Device Properties — Unsolicited
        • Device Properties — Event Playback
        • Device Properties — Tag Import
        • Device Properties — Authentication
        • Device Properties — Update Key Authentication
        • Device Properties — File Control
        • Device Properties — Advanced
      • Data Types Description
      • Address Descriptions
        • Object Group 0 - Device Attributes
        • Object Group 1- Binary Inputs
        • Object Group 3 - Double Bit Inputs
        • Object Group 10 - Binary Outputs
        • Object Group 12 - Binary Output Commands
        • Object Group 20 - Counters
        • Object Group 21 - Frozen Counters
        • Object Group 30 - Analog Inputs
        • Object Group 34 - Analog Inputs Deadband
        • Object Group 40 - Analog Outputs
        • Object Group 41 - Analog Output Commands
        • Object Group 50 - Time and Date
        • Object Group 60 - Class Poll Data Request
        • Object Group 70 - File Identifiers
        • Object Group 80 - Internal Indications
        • Object Group 87 - Data Sets
        • Object Group 110 - Octet String Object
        • Object Group 120 - Authentication Object
        • Other Other Object Groups
        • DNP Tags
          • Internal Tags
          • Special Tags
      • Device Profile
        • Device Properties — Identification
        • Link Layer
        • Application Layer
        • Clients (Masters) Only
        • Security Parameters
        • Implementation Tables
      • Error Descriptions
        • Address Validation
          • Address <address> is not valid on device <channel> <device>.
          • Address <address> is out of range for the specified device or register.
          • Data type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is read only.
        • Authentication Error Messages
          • Secure authentication failure on device <channel.device>. Device does not support the function code (IIN2.0).
          • Secure authentication failure on device <channel.device>. Key Status Request communications failure. Session keys are not valid.
          • Secure authentication failure on device <channel.device>. Key Status Request non-authentic. Session Keys are not valid.
          • Secure authentication failure on device <channel.device>. Aggressive Mode Response indicates improper authentication.
          • Secure authentication failure on device <channel.device>. Challenge Reply indicates improper authentication.
          • Secure authentication failure on device <channel.device>. User= <User Number>, AssocID= <Association ID>, Sequence= <Sequence Number>. RX Error Code= <error code>-<error description>.
          • Secure authentication failure on device <channel.device>. User= <User Number>, AssocID= <Association ID>, Sequence= <Sequence Number>. TX Error Code= <error code>-<error description>.
          • Secure authentication failure on device <channel.device>. Authentication reply timed out.
          • Secure authentication failure on device <channel.device>. Authorization failure.
          • Secure authentication failure on device <channel.device>. Session key change failed.
          • Secure authentication failure on device <channel.device>. Update key change failed.
          • Secure authentication failure on device <device>. Key Status Request response status code: <status code>.
        • Automatic Tag Database Generation Error Messages
          • Unable to add data set <data set index> on device <device name>. Data set has <number of elements> elements. The maximum number of elements allowed is <max elements>.
          • Unable to generate a tag database for device <device>. Channel is not open.
          • Unable to generate a tag database for device <device>. Session is not open.
          • Unable to generate a tag database for device <driver>. The device is not responding.
          • Unable to read device attribute set <set number>. No tags added on device <device>.
        • Device Status Messages
          • <item description> on device <device> has been auto-demoted
          • <item description> on device <device> has been auto-promoted to determine if it can be completed
          • Added <tag count> data set tag(s).
          • Data Set write of value <value to be written> pending on tag address <address> on device <device>.
          • Device <device> does not support the LAN Time Sync Style Record Current Time Function Code 24.
          • Device <device> does not support the LAN Time Sync Style write to object group 50, variation 3.
          • Device <device> indicated an event buffer overflow (IIN 2.3).
          • Device <device> indicated it restarted (IIN 1.7).
          • Device <device> initialization completed.
          • Device <device> requested time synchronization (IIN 1.4).
          • Device <device> is restarting.
          • Device <device name> is not responding.
          • Failed to resolve Destination Host <host name> on channel <channel name>.
          • The Keep-Alive Interval with UDP Protocol on device <device> was overridden.
          • Reached max. events per point for object group <object group> point <data index> on device <device>.
          • Request failed on device <device>. Device does not support the function code (IIN2.0).
          • Request to enable unsolicited messaging failed on device <device>.
          • Unable to bind to local address (IP: xxx.xxx.xxx.xxx, Source Port: ).
          • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Failed to initialize communication stack.
          • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Internal Error occurred.
          • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Failed to initialize communication stack.
          • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Internal error occurred.
          • Unable to read tag <tag address> on device <device>. Device indicates one or more exception conditions (DNP flags byte=<hexadecimal byte> - <DNP flag exception list).
          • Unable to receive response from device <device> within timeout. Either the request or response could not be completed or the response is invalid.
          • Unable to write to address <address> on device <device>. Failed to initialize communication stack.
          • Unable to write to address <address> on device <device>. Internal error occurred.
          • Write complete to data set <index> on device <device>.
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n).
          • Winsock shutdown failed.
          • Winsock V1.1 or higher must be installed to use the driver.
        • DNP Specific Error Messages
          • Read Errors
            • The returned value for tag address <tag address> in device <device name> has a length of zero. The tag value cannot be set.
            • The returned value of <date returned value> for tag address <address> in device <device> is invalid for the <data type> tag data type.
            • The returned value of <returned numeric value> for tag address <address> in device <device> is invalid for the <data type> tag data type.
            • The returned value of <returned numeric value> for tag address <address> in device <device> is out of range for the <data type> tag data type.
            • The returned value of <returned string value> for tag address <address> in device <device> is invalid for the <data type> tag data type.
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. An abnormal condition exists in the device (IIN1.6).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device detected corrupt configuration (IIN2.5).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device does not support a point in the range or other parameter error (IIN2.2).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device does not support requested operation for objects in the request (IIN2.1).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device does not support the function code (IIN2.0).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device reports that some output points are in local mode (IIN1.5).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device reports that the operation is already executing (IIN2.4).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Session shutting down or duplicate request.
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Unable to receive response from device <device> within timeout. Either the request or response could not be completed or the response is invalid.
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Unrecognized object returned in response.
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. An abnormal condition exists in the device (IIN1.6).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device detected corrupt configuration (IIN2.5).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device does not support a point in the range or other parameter error (IIN2.2).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device does not support requested operation for objects in the request (IIN2.1).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device does not support the function code (IIN2.0).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device reports that some output points are in local mode (IIN1.5).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device reports that the operation is already executing (IIN2.4).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Session shutting down or duplicate request.
            • Unable to read point(s) <OBJ.VAR.IDX - OBJ.VAR.IDX> on device <device>. Unable to receive response from device <device> within timeout. Either the request or response could not be completed or the response is invalid.
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Unrecognized object returned in response.
            • Unable to read set <set index> of object group <object group> on device <device>. An abnormal condition exists in the device (IIN1.6).
            • Unable to read set <set index> of object group <object group> on device <device>. Device detected corrupt configuration (IIN2.5).
            • Unable to read set <set index> of object group <object group> on device <device>. Device does not support a point in the range or other parameter error (IIN2.2).
            • Unable to read set <set index> of object group <object group> on device <device>. Device does not support requested operation for objects in the request (IIN2.1).
            • Unable to read set <set index> of object group <object group> on device <device>. Device does not support the function code (IIN2.0).
            • Unable to read set <set index> of object group <object group> on device <device>. Device reports that some output points are in local mode (IIN1.5).
            • Unable to read set <set index> of object group <object group> on device <device>. Device reports that the operation is already executing (IIN2.4).
            • Unable to read set <set index> of object group <object group> on device <device>. Session shutting down or duplicate request.
            • Unable to read set <set index> of object group <object group> on device <device>. Unrecognized object returned in Response.
            • Unable to read tag address <address> on device <device>. Element index <variation> is not defined in data set <index>.
            • Unable to read tag address <address> on device <device>. No definition for data set <index>.
            • Unable to read tag address <address> on device <device>. Response missing data.
          • Write Errors
            • Unable to write to address <address> on device <device>. Activate configuration-related status code <status code> - <description>.
            • Unable to write to address <address> on device <device>. An abnormal condition exists in the device (IIN1.6).
            • Unable to write to address <address> on device <device>. Channel response timeout must be between <min channel response timeout> and <max channel response timeout>.
            • Unable to write to address <address> on device <device>. Control-related status code <status code>.
            • Unable to write to address <address> on device <device>. Destination <eestination host>:<destination port> already in use on channel <channel>.
            • Unable to write to address <address> on device <device>. Destination Port must be between <min. source port> and <max. source port>.
            • Unable to write to address <address> on device <device>. Device detected corrupt configuration (IIN2.5).
            • Unable to write to address <address> on device <device>. Device does not support a point in the range or other parameter error (IIN2.2).
            • Unable to write to address <address> on device <device>. Device does not support requested operation for objects in the request (IIN2.1).
            • Unable to write to address <address> on device <device>. Device does not support the function code (IIN2.0).
            • Unable to write to address <address> on device <device>. Device reports that some output points are in local mode (IIN1.5).
            • Unable to write to address <address> on device <device>. Device reports that the operation is already executing (IIN2.4).
            • Unable to write to address <address> on device <device>. Device Request Timeout must be between <min. value> and <max value>.
            • Unable to write to address <address> on device <device>. Element index <variation> is not defined in data set <index>.
            • Unable to write to address <address> on device <device>. Event poll interval must be between <min. value> and <max. value>.
            • Unable to write to address <address> on device <device>. File name writes have been disabled.
            • Unable to write to address <address> on device <device>. Integrity poll interval must be between <min. value> and <max value>.
            • Unable to write to address <address> on device <device>. DNP client address <DNP address> already in use as DNP server address on device <device>.
            • Unable to write to address <address> on device <device>. DNP client address must be between <min DNP  address> and <max DNP  address>.
            • Unable to write to address <address> on device <device>. DNP client and DNP server address cannot be the same.
            • Unable to write to address <address> on device <device>. No definition for Data Set <index>.
            • Unable to write to address <address> on device <device>. Protocol must be between <min. protocol> and <max. protocol>.
            • Unable to write to address <address> on device <device>. Select Operate response invalid.
            • Unable to write to address <address> on device <device>. Session shutting down or duplicate request.
            • Unable to write to address <address> on device <device>. DNP server address <DNP address> already in use on device <device>.
            • Unable to write to address <address> on device <device>. DNP server address must be between <min. DNP address> and <max. DNP address>.
            • Unable to write to address <address> on device <device>. Source p[ort must be between <min source port> and <max source port>.
            • Unable to write to address <address> on device <device>. Tag <data type> data type is incompatible with the Data Set element <data type> data type.
            • Unable to write to address <address> on device <device>. Unable to receive response from device <device> within timeout. Either the request or response could not be completed or the response is invalid.
            • Unable to write to address <address> on device <device>. Unrecognized object returned in response.
            • Unable to write to address <address> on device <device>. Unsupported Operation Type.
            • Unable to write to address <address> on device <device>. Unsupported Trip-Close Code.
            • Unable to write to address <address> on device <device>. Write value specified is invalid or incomplete.
        • File Control Error Messages
          • File Transfer failure on device <device> for file index <index>. Device returned File-Related Status Code <status code> - <description>.
          • File Transfer failure on device <device> for file index <index>. File size of <size> kilobytes is greater than maximum file size of <maximum size> kilobytes.
          • File Transfer failure on device <device> for file index <index>. File transfer stopped by user.
          • File Transfer failure on device <device> for file index <index>. File transfer stopped due to communications issue.
          • File Transfer failure on device <device> for file index <index>. Local file <file name> is empty.
          • File Transfer failure on device <device> for file index <index>. Local file open failure. <local file open failure>.
          • File Transfer failure on device <device> for file index <index>. Session shutting down or duplicate request.
          • Invalid local file for file index 70.<file index>, general error
          • Invalid Local File for File Index 70.<file index>, verify the specified path is write-enabled
          • Invalid Local File path for File Index 70.<file index>
          • Invalid Local File syntax for File Index 70.<file index>
    • DNP Client Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Channel Properties — Timing
          • Timing and Other Considerations
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
          • Automatic Tag Generation Hints
        • Device Properties — Auto-Demotion
        • Device Properties — Communications
        • Device Properties — Polling
        • Device Properties — Unsolicited
        • Device Properties — Event Playback
        • Device Properties — Tag Import
        • Device Properties — Authentication
        • Device Properties — Update Key Authentication
        • Device Properties — File Control
        • Device Properties — Advanced
      • Data Types Description
      • Address Descriptions
        • Object Group 0 - Device Attributes
        • Object Group 1 - Binary Inputs
        • Object Group 3 - Double-Bit Inputs
        • Object Group 10 - Binary Outputs
        • Object Group 12 - Binary Output Commands
        • Object Group 20 - Counters
        • Object Group 21 - Frozen Counters
        • Object Group 30 - Analog Inputs
        • Object Group 34 - Analog Inputs Deadband
        • Object Group 40 - Analog Outputs
        • Object Group 41 - Analog Output Commands
        • Object Group 50 - Time and Date
        • Object Group 60 - Class Poll Data Request
        • Object Group 70 - File Identifiers
        • Object Group 80 - Internal Indications
        • Object Group 87 - Data Sets
        • Object Group 110 - Octet String Object
        • Object Group 120 - Authentication Object
        • Other Object Groups
        • DNP Tags
          • Internal Tags
          • Special Tags
      • Device Profile
        • Device Identification
        • Link Layer
        • Application Layer
        • Clients (Masters) Only
        • Security Parameters
        • Implementation Tables
      • Error Descriptions
        • Address Validation
          • Address <address> is not valid on device <channel> <device>.
          • Address <address> is out of range for the specified device or register.
          • Data type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is read only.
        • Authentication Error Messages
          • Secure authentication failure on device <channel.device>. Device does not support the function code (IIN2.0).
          • Secure authentication failure on device <channel.device>. Authentication reply timed out.
          • Secure authentication failure on device <channel.device>. Authorization failure.
          • Secure authentication failure on device <channel.device>. Session key change failed.
          • Secure authentication failure on device <channel.device>. Update key change failed.
          • Secure authentication failure on device <channel.device>. Key Status Request communications failure. Session keys are not valid.
          • Secure authentication failure on device <channel.device>. Key Status Request non-authentic. Session keys are not valid.
          • Secure authentication failure on device <channel.device>. Aggressive Mode response indicates improper authentication.
          • Secure authentication failure on device <channel.device>. Challenge Reply indicates improper authentication .
          • Secure authentication failure on device <channel.device>. User= <user number>, AssocID= <Association ID>, Sequence= <sequence number>. RX Error Code= <error code>-<error description>.
          • Secure authentication failure on device <channel.device>. User= <user number>, AssocID= <Association ID>, Sequence= <sequence number>. TX Error Code= <error code>-<error description>.
          • Secure authentication failure on device <device>. Key Status Request response status code: <status code>.
        • Automatic Tag Database Generation Messages
          • Unable to add data set <data set index> on device <device name>. Data set has <number of elements> elements. The maximum number of elements allowed is <max. elements>.
          • Unable to generate a tag database for device <device>. Channel is not open.
          • Unable to generate a tag database for device <device>. Session is not open.
          • Unable to generate a tag database for device <device name>. Unable to open communications port.
          • Unable to generate a tag database for device <driver>. The device is not responding.
          • Unable to read device attribute set <set number>. No tags added on device <device>.
        • Device Status Messages
          • <Item description> on device <device> has been auto-demoted.
          • <item description> on device <device> has been auto-promoted to determine if it can be completed.
          • Added <tag count> Data Set tag(s).
          • Data set write of value <value to be written> pending on tag address <address> on device <device>.
          • Device <device> does not support the LAN Time Sync Style Record Current Time Function Code 24.
          • Device <device> does not support the LAN Time Sync Style write to object group 50, variation 3.
          • Device <device> indicated an event buffer overflow (IIN 2.3).
          • Device <device> indicated it restarted (IIN 1.7).
          • Device <device> initialization completed.
          • Device <device> requested time synchronization (IIN 1.4).
          • Device <device> restarting
          • Device <device name> is not responding.
          • Reached Max. Events Per Point for object group <object group> Point <data index> on device <device>.
          • Request failed on device <device>. Device does not support the function code (IIN2.0).
          • Request to enable unsolicited messaging failed on device <device>.
          • Unable to bind to local address (IP: xxx.xxx.xxx.xxx, Source Port: x).
          • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Failed to initialize communication stack.
          • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Internal error occurred.
          • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Failed to initialize communication stack.
          • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Internal error occurred.
          • Unable to read tag <tag address> on device <device>. Device indicates one or more exception conditions (DNP flag byte=<hexadecimal byte> - <DNP flag exception list').
          • Unable to receive response from device <device> within timeout. Either the request or response could not be completed or the response is invalid.
          • Unable to write to address <address> on device <device>. Failed to initialize communication stack.
          • Unable to write to address <address> on device <device>. Internal error occurred.
          • Write complete to data set <index> on device <device>.
        • DNP Specific Error Messages
          • Read Errors
            • The returned value for tag address <tag address> in device <device name> has a length of zero. The tag value cannot be set.
            • The returned value of <date returned value> for tag address <address> in device <device> is invalid for the <data type> tag data type.
            • The returned value of <returned numeric value> for tag address <address> in device <device> is invalid for the <data type> tag data type.
            • The returned value of <returned numeric value> for tag address <address> in device <device> is out of range for the <data type> tag data type.
            • The returned value of <returned string value> for tag address <address> in device <device> is invalid for the <data type> tag data type.
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. An abnormal condition exists in the device (IIN1.6).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device detected corrupt configuration (IIN2.5).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device does not support a point in the range or other parameter error (IIN2.2).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device does not support requested operation for objects in the request (IIN2.1).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device does not support the function code (IIN2.0).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device reports that some output points are in local mode (IIN1.5).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Device reports that the operation is already executing (IIN2.4).
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Session shutting down or duplicate request.
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Unable to receive response from device <device> within timeout. Either the request or response could not be completed or the response is invalid.
            • Unable to read point(s) <OBJ.VAR.IDX> on device <device>. Unrecognized object returned in response.
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. An abnormal condition exists in the device (IIN1.6).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device detected corrupt configuration (IIN2.5).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device does not support a point in the range or other parameter error (IIN2.2).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device does not support requested operation for objects in the request (IIN2.1).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device does not support the function code (IIN2.0).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device reports that some output points are in local mode (IIN1.5).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Device reports that the operation is already executing (IIN2.4).
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Session shutting down or duplicate request.
            • Unable to read point(s) <OBJ.VAR.IDX - OBJ.VAR.IDX> on device <device>. Unable to receive response from device <device> within timeout. Either the request or response could not be completed or the response is invalid.
            • Unable to read point(s) <OBJ.VAR.IDX – OBJ.VAR.IDX> on device <device>. Unrecognized object returned in response.
            • Unable to read set <set index> of object group <object group> on device <device>. An abnormal condition exists in the device (IIN1.6).
            • Unable to read set <set index> of object group <object group> on device <device>. Device detected corrupt configuration (IIN2.5).
            • Unable to read set <set index> of object group <object group> on device <device>. Device does not support a point in the range or other parameter error (IIN2.2).
            • Unable to read set <set index> of object group <object group> on device <device>. Device does not support requested operation for objects in the request (IIN2.1).
            • Unable to read set <set index> of object group <object group> on device <device>. Device does not support the function code (IIN2.0).
            • Unable to read set <set index> of object group <object group> on device <device>. Device reports that some output points are in local mode (IIN1.5).
            • Unable to read set <set index> of object group <object group> on device <device>. Device reports that the operation is already executing (IIN2.4).
            • Unable to read set <set index> of object group <object group> on device <device>. Session shutting down or duplicate request.
            • Unable to read set <set index> of object group <object group> on device <device>. Unrecognized object returned in response.
            • Unable to read tag address <address> on device <device>. Element index <variation> is not defined in data set <index>.
            • Unable to read tag address <address> on device <device>. No definition for data set <index>.
            • Unable to read tag address <address> on device <device>. Response missing data.
          • Write Errors
            • Unable to write to address <address> on device <device>. Activate Configuration-Related Status Code <status code> - <description>.
            • Unable to write to address <address> on device <device>. An abnormal condition exists in the device (IIN1.6).
            • Unable to write to address <address> on device <device>. Channel Response Timeout must be between <min. channel response timeout> and <max. channel response timeout>.
            • Unable to write to address <address> on device <device>. Control-Related Status Code <status code>.
            • Unable to write to address <address> on device <device>. Device detected corrupt configuration (IIN2.5).
            • Unable to write to address <address> on device <device>. Device does not support a point in the range or other parameter error (IIN2.2).
            • Unable to write to address <address> on device <device>. Device does not support requested operation for objects in the request (IIN2.1).
            • Unable to write to address <address> on device <device>. Device does not support the function code (IIN2.0).
            • Unable to write to address <address> on device <device>. Device reports that some output points are in local mode (IIN1.5).
            • Unable to write to address <address> on device <device>. Device reports that the operation is already executing (IIN2.4).
            • Unable to write to address <address> on device <device>. Device Request Timeout must be between <min. value> and <max. value>.
            • Unable to write to address <address> on device <device>. Element index <variation> is not defined in data set <index>.
            • Unable to write to address <address> on device <device>. Event Poll Interval must be between <min. value> and <max. value>.
            • Unable to write to address <address> on device <device>. File name writes have been disabled.
            • Unable to write to address <address> on device <device>. Integrity Poll Interval must be between <min. value> and <max. value>.
            • Unable to write to address <address> on device <device>. DNP client address <DNP client address> already in use as DNP server address on device <device>.
            • Unable to write to address <address> on device <device>. DNP client address must be between <min. DNP address> and <max. DNP address>.
            • Unable to write to address <address> on device <device>. DNP client and DNP server address cannot be the same.
            • Unable to write to address <address> on device <device>. No definition for data set <index>.
            • Unable to write to address <address> on device <device>. Select operate response invalid.
            • Unable to write to address <address> on device <device>. Session shutting down or duplicate request.
            • Unable to write to address <address> on device <device>. DNP server address <DNP server address> already in use on device <device>.
            • Unable to write to address <address> on device <device>. DNP server address must be between <min. DNP address> and <max. DNP address>.
            • Unable to write to address <address> on device <device>. Tag <data type> data type is incompatible with the data set element <data type> data type.
            • Unable to write to address <address> on device <device>. Unable to receive response from device <device> within timeout. Either the request or response could not be completed or the response is invalid.
            • Unable to write to address <address> on device <device>. Unrecognized object returned in response.
            • Unable to write to address <address> on device <device>. Unsupported operation type.
            • Unable to write to address <address> on device <device>. Unsupported Trip-Close Code.
            • Unable to write to address <address> on device <device>. Write value specified is invalid or incomplete.
        • File Control Error Messages
          • File transfer failure on device <device> for file index <index>. Device returned File-Related Status Code <status code> - <description>.
          • File transfer failure on device <device> for file index <index>. File size of <size> kilobytes is greater than maximum file size of <maximum size> kilobytes.
          • File transfer failure on device <device> for file index <index>. File transfer cancellation by user.
          • File transfer failure on device <device> for file index <index>. File transfer cancelled due to communications issue.
          • File transfer failure on device <device> for file index <index>. Local file <file name> is empty.
          • File transfer failure on device <device> for file index <index>. Local file open failure. <local file open failure>.
          • File transfer failure on device <device> for file index <index>. Session shutting down or duplicate request.
          • Invalid local file for File Index 70.<file index>, general error.
          • Invalid local file for File Index 70.<file index>, verify the specified path is write-enabled.
          • Invalid local file path for File Index 70.<file index>.
          • Invalid local file syntax for File Index 70.<file index>.
    • Enron Modbus
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
          • Automatic Tag Database Generation
        • Device Properties — Time Synchronization
        • Device Properties — Settings
        • Device Properties — Block Sizes
        • Device Properties — Framing
        • Device Properties — Error Handling
        • Device Properties — EFM Meters
          • Configuration Mapping
          • History Mapping
          • Alarm Mapping
          • Event Mapping
          • EFM Cache
      • Address Ranges
      • CSV Import/Export
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Address <address> is out of range for the specified device or register.
          • Array size is out of range for address <address>.
          • Data Type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
        • Device Status Messages
          • Device <device name> is not responding.
          • Unable to write to <address> on device <device name>.
        • Enron Modbus Specific Messages
          • <Device Name> - Failed to read EFM pointer file. <Extended Error>.
          • <Device name> - Failed to write EFM pointer file. <Extended error>.
          • Alarm mapping for address <address> is invalid and will be ignored.
          • Archive address <address> is used in Meter <number> for <archive> archive and in Meter < number> for <archive> archive in device <device name>. Duplicate archive addresses are not allowed.
          • Bad address in block [<start address> to <end address>] on device <device name>.
          • Bad array spanning [<address> to <address>] on device <device>.
          • Block address [<start address> to <end address>] on device <device> responded with exception code <code>.
          • Config attribute <attribute index> is unknown and will be ignored.
          • Config mapping for attribute <attribute name> is invalid and will be ignored.
          • Error parsing alarm/event record. The record size is incorrect.
          • Error parsing history record. History mapping does not match record read from device, record will not be logged.
          • Error reading date and time, alarm/event record will not be logged.
          • Error reading date and time, history record will not be logged.
          • Failure to load <mapping name> mapping from CSV. The header contains a duplicate field name <name>.
          • Failure to load <mapping name> mapping from CSV. The header contains an unrecognized field name <name>.
          • Failure to load <mapping name> mapping from CSV. There is no header in the CSV file.
          • History attribute <attribute index> is unknown and will be ignored.
          • History mapping for attribute <attribute name> is invalid and will be ignored.
          • Meter <number> has an invalid EFM Mapping (<mapping name>). Defaulting the mapping to <mapping name>.
          • Meter name <name> is used in Meter <number> and in Meter <number> in device <device name>. Duplicate meter names are not allowed.
          • Serialization of EFM data to temporary file <file name> failed. Reason: <file I/O error>.
          • The configuration map address <address> for meter <meter name> is beyond the maximum address allowed by the Enron Modbus protocol. This address will be ignored.
          • The device archive index is larger than the archive size configured in the server. Please reconfigure the device with the correct archive size.
          • The EFM Meter Daily GC data value <value> in device <device name>’ is not valid. Valid range is 0 or <min> to <max>.
          • The EFM Meter Event Counter value <value> in device <device name> is not valid. Valid range is 0 or <min> to <max>.
          • The EFM Meter Hourly GC data value <value> in device <device name> is not valid. Valid range is 0 or <min> to <max>.
          • The requested record does not exist or is invalid for <archive tag> on <device>. Cancelling the poll. Please verify the archive configuration settings.
          • Unable to create tag for EFM configuration attribute <attribute> with address <address> on meter <meter name>.
          • Unable to read <address> from device <device name>. The device is configured for broadcast writes only.
          • Unable to read block address [<start address> to <end address>] on device <device name>. Unexpected characters in response.
          • Unable to read from address <address> on device <device>: Device responded with exception code <code>.
          • Unable to read from address <address> on device <device>. The configured device ID did not match the value retrieved from the device(<deviceID>).
          • Unable to read from address <address> on device <device name>. Response is not the correct size.
          • Unable to read from address <address> on device <device name>. Unexpected characters in response.
          • Unable to read <address> from device <device name>. The device is not responding.
          • Unable to synchronize time with device <device name>. The device is not responding.
          • Unable to write to address <address> on device <device>: Device responded with exception code <code>.
          • Unable to write to address <address> on device <device name>. Unexpected characters in response.
          • Value for attribute <attribute name> retrieved from Configuration read could not be associated with a valid enumerable value.
          • Warning loading <mapping name> mapping from CSV. Alarm state for address <address> is invalid. Setting the state to off.
          • Warning loading <mapping name> mapping from CSV. Alarm type for address <address> is invalid. Setting the type to differential pressure alarm.
          • Warning loading <mapping name> mapping from CSV. Ignoring alarm with no address.
          • Warning loading <mapping name> mapping from CSV. Ignoring record with no address.
          • Warning loading <mapping name> mapping from CSV. No records were imported.
          • Warning loading <mapping name> mapping from CSV. The attribute <name> is unknown, and will be ignored.
        • Serial Communications
          • Communications error on <channel name> [<error mask>].
          • COMn does not exist.
          • COMn is in use by another application.
          • Error opening COMn
          • Unable to set comm properties on COMn.
        • Modbus Exception Codes
    • EUROMAP 63
      • Overview
      • Architecture
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
          • Automatic Tag Generation
        • Device Properties — Communications Parameters
      • Data Exchange Interface
      • Optimizing Communications
        • Shared Session Folder
      • Supported Euromap 63 Request Commands
      • Data Types Description
      • Address Descriptions
      • Event Log Messages
        • Event Log Messages
    • Getting Started
      • Overview
      • External Dependencies
        • Install a Focas Library
        • Additional Software Requirements
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Communications Parameters
        • Device Properties — Unsolicited Transfer Control
        • Device Properties — Unsolicited Data Areas
        • Unsolicited Messaging
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • Series 15i
        • Series 16i
        • Series 18i
        • Series 21i
        • Power Mate i
        • Open
        • CNC Data
          • System Info Tags
          • Status Info Tags
          • Tool Offset
          • Workpiece Zero Offset
          • Parameter Read Valuess
          • Alarm Values
          • Diagnostic Values
          • Path Values
          • Read Axis Data Values
          • Program Values
          • Program Name
          • Read Dynamic2 Data Values
          • Read Alarm Messages
          • Read Timer Data Values
          • Read Program Directory Data
      • Error Descriptions
        • Address Validation
          • Address <address> is out of range for the specified device or register.
          • Array size is out of range for address <address>.
          • Array support is not available for the specified address: <address>.
          • Data Type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is read only.
          • Missing address.
        • Device Status Messages
          • Device <device name> is not responding.
          • Unable to write to <address> on device <device name>.
        • Driver Error Messages
          • Could not acquire library handle for device <channel.device>. FWLIB error: <code>.
          • Could not read one or more vacant macros in range starting at <address> on device <device>.
          • Could not set request timeout for device <channel.device>. FWLIB error: <code>.
          • Invalid XML document. Reason: Error loading Unsolicited Data Areas for device <device-name>. End address can not be less than start address for area <area-number>.
          • Invalid XML document. Reason: Error loading Unsolicited Data Areas for device <device-name>. Invalid area order or duplicate area number.
          • Invalid XML document. Reason: Error loading Unsolicited Data Areas for device <device-name>. Maximum size of area <area-number> is <size> bytes.
          • Read error occurred for address starting at <address> on device <channel.device>. FWLIB error: <code>.
          • Unable to start the Fanuc Focas Data Window Library services.
          • Write error occurred for address <address> on device <channel.device>. FWLIB error: <code>.
          • Write to address <address> on device <device>: The program number <number> does not exist on the controller.
        • Fanuc Focas Server Device Driver Error Messages
          • Attempt to launch unsolicited message server failed.
          • Could not access necessary system resources for Fanuc Focas server device: <channel.device>.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not acquire library handle. FWLIB error: <code>.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not determine host IP address.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set data area size.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set data area start address.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set data area type.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set host IP.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set host port.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set message alive time.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set message retries.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set message timeout.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set messaging parameters. FWLIB data error <code>.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set messaging parameters. FWLIB error: <code>.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set number of data areas.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set request timeout. FWLIB error: <code>.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set transmission control PMC type.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not set transmission control start address.
          • Failed to connect Fanuc Focas server device <channel.device>. Could not start messaging session. FWLIB error: <code>.
          • Installed version of Focas Data Window Library does not support unsolicited communication. Device <device> deactivated.
          • Received CNC power down notification from unsolicited message server. Reconnecting Fanuc Focas server devices.
          • Received CNC power up notification from unsolicited message server.
          • Received socket error notification from unsolicited message server.
          • Received unsolicited message server shutdown notification.
          • Unsolicited message server does not seem to be running. Attempting to launch.
        • Focas 1 Data Window Library Error Codes
      • Appendix — API Calls
    • Fanuc Focas HSSB
      • Overview
      • External Dependencies
        • Install Focas Library
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Communications Parameters
      • Optimizing Fanuc Focas HSSB Communications
      • Data Types Description
      • Address Descriptions
        • Series 15i
        • Series 16i
        • Series 18i
        • Series 21i
        • Power Mate i
        • Open
        • CNC Data
          • Tool Offset
          • Workpiece Zero Offset
      • Event Log Messages
        • Event Log Messages
        • Focas1 Data Window Library Error Codes
    • Fisher ROC Ethernet
      • Overview
      • Channel Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
      • Device Setup
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Time Synchronization
        • Device Properties — Communication Parameters
        • Device Properties — Tag Import Settings
        • Device Properties — Communication Specification
        • Device Properties — Operator Identification
        • Device Properties — EFM Meters
          • EFM Attribute Mapping
      • Data Type Descriptions
        • TLP Data Type Conversion Process and Examples
      • Address Descriptions
        • ROC Point Types
        • Logical / Point Number Details
        • User-Defined Point Types
        • User Table Points
        • Bit Assignments
      • Statistics Items
      • EFM Pointer Rollback
      • Event Log Messages
        • Address Validation
          • Address <address> is out of range for the specified device or register.
          • Data type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is not supported by model <model name>.
          • Device address <address> is read only.
          • Missing address.
        • Automatic Tag Database Generation Error Messages
          • Error importing CSV tag record <record number>: Address <address> is out of range for the specified device or register.
          • Unable to generate a tag database for device <device>. Reason: <Error reason>.
          • Unable to generate a tag database for device <device>. Reason: Auto tag generation.
          • Unable to generate a tag database for device <device>. Reason: Error while reading from import file.
          • Unable to generate a tag database for device <device>. Reason: Error while reading from ROC system file.
          • Unable to generate a tag database for device <device>. Reason: Failed to open record set.
          • Unable to generate a tag database for device <device>. Reason: Import file <file name> not found.
          • Unable to generate a tag database for device <device>. Reason: Input file is corrupt.
          • Unable to generate a tag database for device <device>. Reason: Import file <file name> not found.
          • Unable to generate a tag database for device <device>. Reason: Low memory resources.
          • Unable to generate a tag database for device <device>. Reason: ROC system file <file name> not found.
          • Unable to generate a tag database for device <device>. Reason: System DB file <file name> not found.
        • Device Specific Messages
          • <Device name> - Failed to read EFM pointer file. <Extended error>.
          • <Device name> - Failed to write EFM pointer file. <Extended error>.
          • Block read for point type <point type>, logical address <logical address>, parameter range <start parameter - end parameter> of device <device name> failed. Parameters are not in the loaded UDP configuration.
          • Device <device> responded with error. (Tag <tag address>) - Details: <error code>.
          • EFM hourly history upload failed for device. Device responded with error code 14.
          • Failed to obtain data block for point type = <point type>, logical address = <address>, starting parameter = <starting parameter>, ending parameter <ending parameter> for device <device>. Error = <ROC error code>.
          • Failed to obtain data block for point type = <point type>, logical address = <address>, starting parameter = <starting parameter>, ending parameter <ending parameter> for device <device>. Error = <ROC error code>.
          • Operator identification failed for device <device name>. <Error reason>.
          • Read for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name> failed. Parameter is not in the loaded UDP configuration.
          • ROC initialization error: Unable to read general configuration.
          • ROC initialization error: Unable to retrieve I/O map.
          • Serialization of EFM data to temporary file <file name> failed. Reason: <file I/O error>.
          • The rollback value has been adjusted to match the archive size because it exceeded the size of the archive | Adjusted Rollback = <size>, Archive = <name>.
          • The username or password supplied was not accepted. Error = 6.
          • The username or password supplied was not accepted. Error = 63.
          • Time synchronization with device <device name> failed. <Error reason>.
          • Write for the following tags of device <device name> failed: <tag list>. <Error reason>.
          • Write request rejected on read-only item reference <channel name> <device name>.
        • Device Status Messages
          • Device <device name> is not responding.
          • EFM <type> upload failed for device <device>. <Reason>.
          • Resetting the EFM cache for device <device>.
        • User Configurable Table Messages
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Device returned error code <error code>.
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Framing error.
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Locations are not configured in the user table.
          • User Table Points
          • Error parsing user table configuration on device <device name>. User table <table number> contains an invalid user-defined point type, location, or parameter in table location <location address>.
          • Read for user table <table number>, location <location address> of device <device name> failed. Device returned error code <error code>.
          • Read for user table <table number>, location <location address> of device <device name> failed. Framing error.
          • Read for user table <table number>, location <location address> of device <device name> failed. Location is not configured in the user table.
          • Read for user table <table number>, location <location address> of device <device name> failed. Device returned error code <error code>.
          • User table configuration upload on device <device name> failed. Device not responding.
          • User table configuration upload on device <device name> failed. Framing error.
          • User table configuration upload on device <device name> failed. Internal error.
        • User-Defined Point Error Messages
          • Block read for point type <point type>, logical address <logical address>, parameter range <start parameter - end parameter> of device <device name> failed. Parameters are not in the loaded UDP configuration.
          • Read for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name> failed. Parameter is not in the loaded UDP configuration.
          • Unable to load user-defined point configuration for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name>. The number of parameters for this point is 0.
          • Unable to parse the user-defined point configuration information for point type <point type> on device <device name>.
          • User-defined point configuration upload for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name> failed. <Error reason>.
        • ROC Error Codes
        • Error Reasons
    • Fisher ROC Plus Ethernet
      • Overview
      • Channel Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
      • Device Setup
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Time Synchronization
        • Device Properties — Communication Parameters
        • Device Properties — Tag Import Settings
        • Device Properties — Communication Specification
        • Device Properties — Operator Identification
        • Meter Properties — General
          • EFM Attribute Mapping
      • PLUS Data Type Descriptions
        • TLP Data Type Conversion Process and Examples
      • Address Descriptions
        • ROC Plus Point Types
        • Logical / Location Details
        • User-Defined Point Types
        • User Table Points
        • Binary Field (BIN) Example
      • Statistics Items
      • EFM Pointer Rollback
      • Event Log Messages
        • Address Validation
          • Address <address> is out of range for the specified device or register.
          • Data type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is not supported by model <model name>.
          • Device address <address> is read only.
          • Missing address.
        • Automatic Tag Database Generation Error Messages
          • Error importing CSV tag record <record number>: Address <address> is out of range for the specified device or register.
          • Unable to generate a tag database for device <device>. Reason: <Error reason>.
          • Unable to generate a tag database for device <device>. Reason: Auto tag generation.
          • Unable to generate a tag database for device <device>. Reason: Error while reading from import file.
          • Unable to generate a tag database for device <device>. Reason: Error while reading from ROC system file.
          • Unable to generate a tag database for device <device>. Reason: Failed to open record set.
          • Unable to generate a tag database for device <device>. Reason: Import file <file name> not found.
          • Unable to generate a tag database for device <device>. Reason: Input file is corrupt.
          • Unable to generate a tag database for device <device>. Reason: Import file <file name> not found.
          • Unable to generate a tag database for device <device>. Reason: Low memory resources.
          • Unable to generate a tag database for device <device>. Reason: ROC system file <file name> not found.
          • Unable to generate a tag database for device <device>. Reason: System DB file <file name> not found.
        • Device Specific Messages
          • <Device name> - Failed to read EFM pointer file. <Extended error>.
          • <Device name> - Failed to write EFM pointer file. <Extended error>.
          • Block read for point type <point type>, logical address <logical address>, parameter range <start parameter - end parameter> of device <device name> failed. Parameters are not in the loaded UDP configuration.
          • Device <device> responded with error. (Tag <tag address>) - Details: <error code>.
          • EFM hourly history upload failed for device. Device responded with error code 14.
          • Failed to obtain data block for point type = <point type>, logical address = <address>, starting parameter = <starting parameter>, ending parameter <ending parameter> for device <device>. Error = <ROC error code>.
          • Failed to obtain data block for point type = <point type>, logical address = <address>, starting parameter = <starting parameter>, ending parameter <ending parameter> for device <device>. Error = <ROC error code>.
          • Operator identification failed for device <device name>. <Error reason>.
          • Read for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name> failed. Parameter is not in the loaded UDP configuration.
          • ROC initialization error: Unable to read general configuration.
          • ROC initialization error: Unable to retrieve I/O map.
          • Serialization of EFM data to temporary file <file name> failed. Reason: <file I/O error>.
          • The rollback value has been adjusted to match the archive size because it exceeded the size of the archive | Adjusted Rollback = <size>, Archive = <name>.
          • The username or password supplied was not accepted. Error = 6.
          • The username or password supplied was not accepted. Error = 63.
          • Time synchronization with device <device name> failed. <Error reason>.
          • Write for the following tags of device <device name> failed: <tag list>. <Error reason>.
          • Write request rejected on read-only item reference <channel name> <device name>.
        • Device Status Messages
          • Device <device name> is not responding.
          • EFM <type> upload failed for device <device>. <Reason>.
          • Resetting the EFM cache for device <device>.
        • User Configurable Table Messages
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Device returned error code <error code>.
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Framing error.
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Locations are not configured in the user table.
          • User Table Points
          • Error parsing user table configuration on device <device name>. User table <table number> contains an invalid user-defined point type, location, or parameter in table location <location address>.
          • Read for user table <table number>, location <location address> of device <device name> failed. Device returned error code <error code>.
          • Read for user table <table number>, location <location address> of device <device name> failed. Framing error.
          • Read for user table <table number>, location <location address> of device <device name> failed. Location is not configured in the user table.
          • Read for user table <table number>, location <location address> of device <device name> failed. Device returned error code <error code>.
          • User table configuration upload on device <device name> failed. Device not responding.
          • User table configuration upload on device <device name> failed. Framing error.
          • User table configuration upload on device <device name> failed. Internal error.
        • User-Defined Point Error Messages
          • Block read for point type <point type>, logical address <logical address>, parameter range <start parameter - end parameter> of device <device name> failed. Parameters are not in the loaded UDP configuration.
          • Read for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name> failed. Parameter is not in the loaded UDP configuration.
          • Unable to load user-defined point configuration for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name>. The number of parameters for this point is 0.
          • Unable to parse the user-defined point configuration information for point type <point type> on device <device name>.
          • User-defined point configuration upload for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name> failed. <Error reason>.
        • ROC Plus Error Codes
    • Fisher ROC Plus Serial
      • Overview
      • Channel Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
      • Device Setup
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Time Synchronization
        • Device Properties — Tag Import Settings
        • Device Properties — Communication Specification
        • Device Properties — Operator Identification
        • Meter Properties — General
          • EFM Attribute Mapping
      • PLUS Data Type Descriptions
      • TLP Data Type Conversion Process and Examples
      • Address Descriptions
        • Logical / Location Details
        • ROC Plus Point Types
        • User-Defined Point Types
        • User Table Points
        • Binary Field (BIN) Example
      • Statistics Items
      • EFM Pointer Rollback
      • Event Log Messages
        • Address Validation
          • Address <address> is out of range for the specified device or register.
          • Data type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is not supported by model <model name>.
          • Device address <address> is read only.
          • Missing address.
        • Automatic Tag Database Generation Error Messages
          • Error importing CSV tag record <record number>: Address <address> is out of range for the specified device or register.
          • Unable to generate a tag database for device <device>. Reason: <Error reason>.
          • Unable to generate a tag database for device <device>. Reason: Auto tag generation.
          • Unable to generate a tag database for device <device>. Reason: Error while reading from import file.
          • Unable to generate a tag database for device <device>. Reason: Error while reading from ROC system file.
          • Unable to generate a tag database for device <device>. Reason: Failed to open record set.
          • Unable to generate a tag database for device <device>. Reason: Import file <file name> not found.
          • Unable to generate a tag database for device <device>. Reason: Input file is corrupt.
          • Unable to generate a tag database for device <device>. Reason: Import file <file name> not found.
          • Unable to generate a tag database for device <device>. Reason: Low memory resources.
          • Unable to generate a tag database for device <device>. Reason: ROC system file <file name> not found.
          • Unable to generate a tag database for device <device>. Reason: System DB file <file name> not found.
        • Device Specific Messages
          • <Device name> - Failed to read EFM pointer file. <Extended error>.
          • <Device name> - Failed to write EFM pointer file. <Extended error>.
          • Block read for point type <point type>, logical address <logical address>, parameter range <start parameter - end parameter> of device <device name> failed. Parameters are not in the loaded UDP configuration.
          • Device <device> responded with error. (Tag <tag address>) - Details: <error code>.
          • EFM hourly history upload failed for device. Device responded with error code 14.
          • Failed to obtain data block for point type = <point type>, logical address = <address>, starting parameter = <starting parameter>, ending parameter <ending parameter> for device <device>. Error = <ROC error code>.
          • Failed to obtain data block for point type = <point type>, logical address = <address>, starting parameter = <starting parameter>, ending parameter <ending parameter> for device <device>. Error = <ROC error code>.
          • Operator identification failed for device <device name>. <Error reason>.
          • Read for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name> failed. Parameter is not in the loaded UDP configuration.
          • ROC initialization error: Unable to read general configuration.
          • ROC initialization error: Unable to retrieve I/O map.
          • Serialization of EFM data to temporary file <file name> failed. Reason: <file I/O error>.
          • The rollback value has been adjusted to match the archive size because it exceeded the size of the archive | Adjusted Rollback = <size>, Archive = <name>.
          • The username or password supplied was not accepted. Error = 6.
          • The username or password supplied was not accepted. Error = 63.
          • Time synchronization with device <device name> failed. <Error reason>.
          • Write for the following tags of device <device name> failed: <tag list>. <Error reason>.
          • Write request rejected on read-only item reference <channel name> <device name>.
        • Device Status Messages
          • Device <device name> is not responding.
          • EFM <type> upload failed for device <device>. <Reason>.
          • Resetting the EFM cache for device <device>.
        • User Configurable Table Messages
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Device returned error code <error code>.
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Framing error.
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Locations are not configured in the user table.
          • User Table Points
          • Error parsing user table configuration on device <device name>. User table <table number> contains an invalid user-defined point type, location, or parameter in table location <location address>.
          • Read for user table <table number>, location <location address> of device <device name> failed. Device returned error code <error code>.
          • Read for user table <table number>, location <location address> of device <device name> failed. Framing error.
          • Read for user table <table number>, location <location address> of device <device name> failed. Location is not configured in the user table.
          • Read for user table <table number>, location <location address> of device <device name> failed. Device returned error code <error code>.
          • User table configuration upload on device <device name> failed. Device not responding.
          • User table configuration upload on device <device name> failed. Framing error.
          • User table configuration upload on device <device name> failed. Internal error.
        • User-Defined Point Error Messages
          • Block read for point type <point type>, logical address <logical address>, parameter range <start parameter - end parameter> of device <device name> failed. Parameters are not in the loaded UDP configuration.
          • Read for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name> failed. Parameter is not in the loaded UDP configuration.
          • Unable to load user-defined point configuration for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name>. The number of parameters for this point is 0.
          • Unable to parse the user-defined point configuration information for point type <point type> on device <device name>.
          • User-defined point configuration upload for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name> failed. <Error reason>.
        • ROC Plus Error Codes
        • Error Reasons
    • Fisher ROC Serial
      • Overview
      • Channel Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
      • Device Setup
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Time Synchronization
        • Device Properties — Tag Import Settings
        • Device Properties — Communication Specification
        • Device Properties — Operator Identification
        • Meter Properties — General
          • EFM Attribute Mapping
      • Data Type Descriptions
      • TLP Data Type Conversion Process and Examples
      • Address Descriptions
        • ROC Point Types
        • Logical / Point Number Details
        • User-Defined Point Types
        • User Table Points
        • Bit Assignments
      • Statistics Items
      • EFM Pointer Rollback
      • Event Log Messages
        • Address Validation
          • Address <address> is out of range for the specified device or register.
          • Data type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is not supported by model <model name>.
          • Device address <address> is read only.
          • Missing address.
        • Automatic Tag Database Generation Error Messages
          • Error importing CSV tag record <record number>: Address <address> is out of range for the specified device or register.
          • Unable to generate a tag database for device <device>. Reason: <Error reason>.
          • Unable to generate a tag database for device <device>. Reason: Auto tag generation.
          • Unable to generate a tag database for device <device>. Reason: Error while reading from import file.
          • Unable to generate a tag database for device <device>. Reason: Error while reading from ROC system file.
          • Unable to generate a tag database for device <device>. Reason: Failed to open record set.
          • Unable to generate a tag database for device <device>. Reason: Import file <file name> not found.
          • Unable to generate a tag database for device <device>. Reason: Input file is corrupt.
          • Unable to generate a tag database for device <device>. Reason: Input file not found.
          • Unable to generate a tag database for device <device>. Reason: Low memory resources.
          • Unable to generate a tag database for device <device>. Reason: ROC system file <file name> not found.
          • Unable to generate a tag database for device <device>. Reason: System DB file <file name> not found.
        • Device Specific Messages
          • <Device name> - Failed to read EFM pointer file. <Extended error>.
          • <Device name> - Failed to write EFM pointer file. <Extended error>.
          • Block read for point type <point type>, logical address <logical address>, parameter range <start parameter - end parameter> of device <device name> failed. <Error reason>.
          • Device <device> responded with error. (Tag <tag address>) - Details: <error code>.
          • EFM hourly history upload failed for device. Device responded with error code 14.
          • Failed to obtain data block for point type = <point type>, logical address = <address>, starting parameter = <starting parameter>, ending parameter <ending parameter> for device <device>. Error = <ROC error code>.
          • Failed to write data for point type = <point type>, logical address = <address>, parameter = <parameter> for device <device>. Error = <error code>.
          • Operator identification failed for device <device name>. <Error reason>.
          • Read for point type <point type>, logical address <logical address>, parameter number <parameter number> of device <device name> failed. <Error reason>.
          • ROC initialization error: Unable to read general configuration.
          • ROC initialization error: Unable to retrieve I/O map.
          • Serialization of EFM data to temporary file <file name> failed. Reason: <file I/O error>.
          • The rollback value has been adjusted to match the archive size because it exceeded the size of the archive | Adjusted Rollback = <size>, Archive = <name>.
          • The username or password supplied was not accepted. Error = 6.
          • The username or password supplied was not accepted. Error = 63.
          • Time synchronization with device <device name> failed. <Error reason>.
          • Write for the following tags of device <device name> failed: <tag list>. <Error reason>.
          • Write request rejected on read-only item reference <channel name> <device name> <address>.
        • Device Status Messages
          • Device <device name> is not responding.
          • EFM <type> upload failed for device <device>. <Reason>.
          • Resetting the EFM cache for device <device>.
        • Serial Communications
          • Communications error on <channel name> [<error mask>].
          • COMn does not exist.
          • COMn is in use by another application.
          • Error opening COMn.
          • Unable to set comm parameters on COMn.
        • User Configurable Table Messages
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Device returned error code <error code>.
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Framing error.
          • Block read for user table <table number>, location range <start location> - <end location> of device <device name> failed. Locations are not configured in the user table.
          • Error parsing user table configuration on device <device name>. User table <table number> contains an invalid user-defined point type, location, or parameter in table location <location address>.
          • Error parsing user table configuration on device <device name>. User table <table number> contains an invalid point type, location, or parameter in table location <location address>.
          • Read for user table <table number>, location <location address> of device <device name> failed. Device returned error code <error code>.
          • Read for user table <table number>, location <location address> of device <device name> failed. Framing error.
          • Read for user table <table number>, location <location address> of device <device name> failed. Location is not configured in the user table.
          • User table configuration upload on device <device name> failed. Device not responding.
          • User table configuration upload on device <device name> failed. Device responded with error code <error code>.
          • User table configuration upload on device <device name> failed. Framing error.
          • User table configuration upload on device <device name> failed. Internal error.
        • User-Defined Point Error Messages
          • Block read for point type <point type>, logical address <logical address>, parameter range <start parameter - end parameter> of device <device name> failed. Parameters are not in the loaded UDP configuration.
          • Read for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name> failed. Parameter is not in the loaded UDP configuration.
          • Unable to load user-defined point configuration for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name>. The number of parameters for this point is 0.
          • Unable to parse the user-defined point configuration information for point type <point type> on device <device name>.
          • User-defined point configuration upload for point type <point type>, logical address <logical address>, parameter number <parameter> of device <device name> failed. <Error reason>.
        • ROC Error Codes
        • Error Reasons
    • Fuji Flex
      • Overview
      • Setup
        • Channel Properties — General
          • Channel Properties — Write Optimizations
        • Channel Properties — Serial Communications
        • Channel Properties — Advanced
        • Channel Properties — Interface Options
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Block Size
      • Data Types Description
      • Address Descriptions
        • NB0 Model Address Descriptions
        • Open Model Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm properties on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name> not responding
          • Unable to write to '<address>' on device '<device name>'
        • Driver Specific Messages
          • Device '<device name>' returned 'Parameter Error' probably caused by a bad address in block (Tag:'<address>', Size: <size> bytes). Block deactivated
          • Device '<device name>' returned 'Processing is impossible due to transmission interlock by another device or loader' (Tag: '<address>', Size <size> bytes)
          • Device '<device name>' returned 'Incorrect module number' probably due to unsupported memory type. (Tag: '<address>', Size: <size> bytes). Block deactivated
          • Device '<device name>' returned 'Connection to network is impossible' (Tag: '<address>', Size: <size> bytes)
          • Device '<device name>' returned 'Address exceeding the module's range was specified during write' (Tag: '<address>', Size: <size> bytes)
          • Device '<device name>' returned 'Another loader is communicating over the network' (Tag: '<address>', Size: <size> bytes)
          • Device '<device name>' returned 'Transmission error' (Tag: '<address>', Size: <size> bytes)
          • Device '<device name>' returned error code: '<code>'. (Tag: '<address>', Size: <size> bytes
          • Received a bad check sum (Device: '<device name>', Tag: '<address>', Size: <size> bytes)
          • Response had unexpected format (Device: '<device name>', Tag: '<address>', Size: <size> bytes)
          • Response had incorrect data size (Device: '<device name>', Tag: '<tag name>', Size: <size> bytes)
  • G-L Drivers
    • GE CCM
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
      • Data Types Description
      • Address Descriptions
        • 311 Addressing
        • 313 Addressing
        • 331 Addressing
        • 341 Addressing
        • 731 Addressing
        • 732 Addressing
        • 771 Addressing
        • 772 Addressing
        • 781 Addressing
        • 782 Addressing
        • Series Six Addressing
        • Series Five Addressing
      • Event Log Messages
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
          • Address '<address>' is not valid on device '<device name>'
        • Serial Communications
          • COMn is in use by another application
          • Error opening COMn
          • COMn does not exist
          • Unable to set comm parameters on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name> not responding
          • Unable to write to '<address>' on device '<device name>'
          • Unable to write to tag '<address>' on device '<device name>.' Invalid Request
          • Unable to read tag '<address>' on device '<device name>.' Invalid Request.
          • Unable to read '<count>' bytes starting at '<address>' on device '<device name>'. Invalid Request
          • Unable to write to tag '<address>' on device'<device name>'. Framing Error
          • Unable to read tag '<address>' on device '<device name>'. Framing Error
          • Unable to read '<count>' bytes starting at '<address>' on device '<device name>'. Framing Error
        • Device Specific Messages
          • Invalid tag in block starting at <address> in device <device>
    • HGE EGD
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Tag Generation
        • Exchange Configuration
        • Name Resolutions
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is not supported by model '<model name>'
          • Device address '<address>' is Read Only
          • Missing address.
        • GE Ethernet Global Data Device Specific Messages
          • Consumer exchange (<Exchange ID>) on channel '<channel>' contains an invalid signature from producer (<producer IP>)
          • Consumer exchange (<Exchange ID>) on channel '<channel>' is not receiving production data from producer (<producer IP>)
          • Consumer exchange (<Exchange ID>) on channel '<channel>' is not receiving updates within the configured period (elapsed time <time>ms)
          • Consumer exchange (<Exchange ID>) on channel '<channel>' is receiving an unsynchronized timestamp from producer (<producer IP>
          • Consumer exchange (<Exchange ID>) on channel '<channel>' is receiving out of date data from producer (<producer IP>)
          • No exchanges have been configured. Tags not generated
          • Non-production exchange (<Exchange ID>) received from producer (<producer IP>)
          • Received exchange (<Exchange ID>) with an unsupported protocol version (<protocol version received>) from producer (<producer IP>)
          • The driver has not been properly configured to receive exchange (<Exchange ID>) from producer (<producer IP>)
          • The xml file contains an alias name which has illegal characters. Only alphanumeric and underscore characters are valid
          • Unable to bind consumer socket on '<device>'. (Error Code = <error code>)
          • Unable to bind producer socket required for multicasting on '<device>'. (Error Code = <error code>)
          • Unable to Bind to Adapter: '<adapter>'. Connect failed
          • Unable to create a producer socket on '<device>'. (Error Code = <error code>)
          • Unable to create a consumer socket on '<device>'. (Error Code = <error code>)
          • Unable to determine host name for producing node. (Error Code = <error code>)
          • Unable to get host address for producing node. (Error Code = <error code>)
          • Unable to join multicast group on '<IP address>'. (Error Code = <error code>)
          • Unable to read producer exchange (<Exchange ID>) configuration data on channel '<channel>'. Terminating producer exchange
          • Unable to reuse consumer socket on '<device>'. (Error Code = <error code>)
          • Unable to set time to live for multicasted socket on '<device>'. (Error Code = <error code>)
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the GE Ethernet device driver
      • Configuring EGD
        • Configuring EGD in VersaPro and the OPC Server
        • Configuring EGD in GE Proficy Machine Edition
    • GE Ethernet
      • Overview
      • Setup
      • Channel Properties
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
      • Device Properties
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communications Settings
        • Device Properties — Variable Import Settings
        • Device Properties — PLC Settings
      • Automatic Tag Database Generation
      • Tag Hierarchy
      • Import File-to-Server Name Conversions
      • Importing VersaPro Tags
        • Importing VersaPro Tags
        • VersaPro Import Preparation: VersaPro Steps
        • VersaPro Import Preparation: OPC Server Steps
        • Highlighting VersaPro Variables
        • VersaPro Array Tag Import
      • Importing Cimplicity Logic Developer Tags
        • Importing Cimplicity Logic Developer Tags
        • Cimplicity Logic Developer Import Preparation: Logic Developer Steps
        • Cimplicity Logic Developer Import Preparation: OPC Server Steps
        • Highlighting Cimplicity Logic Developer Variables
        • Cimplicity Logic Developer Array Tag Import
      • Importing Proficy Logic Developer Tags
        • Importing Proficy Logic Developer Tags
        • Proficy Logic Developer Import Preparation: Logic Developer Steps
        • Proficy Logic Developer Import Preparation: OPC Server Steps
        • Highlighting Proficy Logic Developer Variables
        • Proficy Logic Developer Array Tag Import
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • PACSystems Addressing
        • Symbolic Variables
        • 311 Addressing
        • 313 Addressing
        • 331 Addressing
        • 341 Addressing
        • 350 Addressing
        • 360 Addressing
        • 731 Addressing
        • 732 Addressing
        • 771 Addressing
        • 772 Addressing
        • 781 Addressing
        • 782 Addressing
        • GE OPEN Addressing
        • Horner OCS Addressing
        • VersaMax Addressing
        • Advanced Addressing
        • Special Items
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is not supported by model '<model name>'
          • Device address '<address>' is Read Only
          • Missing address
        • Device Status Messages
          • Attempting to reacquire symbolic variable mapping information for device '<device name>'. Cannot read or write symbolic variables until complete
          • Device '<device name> not responding
          • Unable to write to '<address>' on device '<device name>'
        • Driver Error Messages
          • Bit access is invalid for the device data type '<native data type>' at address '<address>' in device '<device>'
          • Bit index '<bit index>' is not valid for the device data type '<native data type>' at address '<address>' in device '<device>'
          • Device '<device name>' returned error code <error num> reading n byte(s) starting at <address>
          • The address length of the symbolic variable addressed by '<tag name>' on device '<device>' is bigger
          • The array size of address '<address>' on device '<device name>' must be the same as symbolic variable's array size of [rows][cols]
          • The data type of the symbolic variable addressed by '<address>' on device '<device name>' is not compatible with tag
          • The symbolic discrete array size of '<size in bytes>' bytes at address '<address>' on device '<device>' exceeds the configured '<block size>' maximum request bytes
          • The symbolic variable name in tag address '<address>' does not exist in current configuration of device '<device name>'
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the GE Ethernet device driver
        • Automatic Tag Database Generation Messages
          • Database Error: Array tags [orig. tag name] [dimensions] exceed 256 characters. Tags renamed to [new tag name] [dimensions]
          • Database Error: Data type '<type>' arrays are currently not supported. Tag '<array tag name>' not created
          • Database Error: Data type '<type>' for tag '<tag name>' is currently not supported. Tag not created
          • Database Error: Data type '<type>' for tag '<tag name>' not found in import file. Setting to default
          • Database Error: Logic Developer Variable Arrays are currently not supported. Array Tag(s) '<array tag name>' not created
          • Database Error: No Reference Address found for tag '<tag name>' in import file. Tag not created
          • Database Error: Only variables with Data Source '<data source name>' are imported. Data Source '<data soure name>' is not..
          • Database Error: Tag '<orig. tag name>' exceeds 256 characters. Tag renamed to '<new tag name>'
          • Unable to generate a tag database for device <device name>. Reason: Import file is invalid or corrupt
          • Unable to generate a tag database for device <device name>. Reason: Low memory resources
    • GE SNP
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Variable Import Settings
      • Data Types Description
      • Automatic Tag Database Generation
        • Tag Hierarchy
        • Import File-to-Server Name Conversions
      • Address Descriptions
        • GE Micro Addressing
        • 311 Addressing
        • 313 Addressing
        • 331 Addressing
        • 341 Addressing
        • 350 Addressing
        • 360 Addressing
        • 731 Addressing
        • 732 Addressing
        • 771 Addressing
        • 772 Addressing
        • 781 Addressing
        • 782 Addressing
        • GE OPEN Addressing
        • Advanced Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>.'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name> not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Invalid tag in block starting at <address> on device <device name>. Block deactivated
        • Write Error Messages
          • Unable to write to tag '<tag address>' on device '<device name>'. The service requested is either not defined or not supported
          • Unable to write to tag '<tag address>' on device '<device name>'. The user does not have sufficient privileges to process the request. Minor status error code = '<hexadecimal error code>'
          • Unable to write to tag '<tag address>' on device '<device name>'. The CPU has received a message that is out of order
          • Unable to write to tag '<tag address>' on device '<device name>'. Service request error. Minor status error code = '<hexadecimal error code>'
          • Unable to write to tag '<tag address>' on device '<device name>'. Service request mailbox type is either undefined or unexpected
          • Unable to write to tag '<tag address>' on device '<device name>'. The PLC CPU's service request queue is full: please wait a minimum of 10 ms before sending another service request
          • Unable to write to tag '<tag address>' on device '<device name>'. A framing error has occurred
          • Unable to write to tag '<tag address>' on device '<device name>'. Device returned major error code '<hexadecimal error code>' and minor error code '<hexadecimal error code>'
        • Blocked Reads Error Messages
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. The service requested is either not defined or not supported
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. The user does not have sufficient privileges to process the request. Minor status error code = '<hexadecimal error code>'
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. The CPU has received a message that is out of order
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. Service request error. Minor status error code = '<hexadecimal error code>'
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. Service request mailbox type is either undefined or unexpected
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. The PLC CPU's service request queue is full: please wait a minimum of 10 ms before sending another service request
          • Unable to read '<byte count>' bytes starting at address '<start tag>' on device '<device name>'. A framing error has occurred
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. Device returned major error code '<hexadecimal error code>' and minor error code '<hexadecimal error code>'
        • Non-Blocked Reads Error Messages
          • Unable to read tag '<tag address>' on device '<device name>'. The service requested is either not defined or not supported
          • Unable to read tag '<tag address>' on device '<device name>'. The user does not have sufficient privileges to process the request. Minor status error code = '<hexadecimal error code>'
          • Unable to read tag '<tag address>' on device '<device name>'. The CPU has received a message that is out of order
          • Unable to read tag '<tag address>' on device '<device name>'. Service request error. Minor status error code = '<hexadecimal error code>'
          • Unable to read tag '<tag address>' on device '<device name>'. Service request mailbox type is either undefined or unexpected
          • Unable to read tag '<tag address>' on device '<device name>'. The PLC CPU's service request queue is full: please wait a minimum of 10 ms before sending another service request
          • Unable to read tag '<tag address>' on device '<device name>'. A framing error has occurred
          • Unable to read tag '<tag address>' on device '<device name>'. Device returned major error code '<hexadecimal error code>' and minor error code '<hexadecimal error code>'
        • Automatic Tag Database Generation Messages
          • Unable to generate a tag database for device <device name>. Reason: Import file is invalid or corrupt
          • Unable to generate a tag database for device <device name>. Reason: Low memory resources
          • Database Error: Tag '<orig. tag name>' exceeds 256 characters. Tag renamed to '<new tag name>'
          • Database Error: Array tags '<orig. tag name><dimensions>' exceed 256 characters. Tags renamed to '<new tag name><dimensions>'
          • Database Error: Datatype '<type>' for tag '<tag name>' not found in import file. Setting to default
          • Database Error: Datatype '<type>' for tag '<tag name>' is currently not supported. Tag not created
          • Database Error: Logic Developer Variable Arrays are currently not supported. Array Tag(s) '<array tag name>' not created
          • Database Error: No Reference Address found for tag '<tag name>' in import file. Tag not created
          • Database Error: Only variables with Data Source '<data source name>' are imported. Data Source '<data soure name>' is not..
          • Database Error: Data type '<type>' arrays are currently not supported. Tag '<array tag name>' not created
      • Appendix: Creating Tag Import Files
        • Importing VersaPro Tags
          • VersaPro Import Preparation: VersaPro Steps
          • VersaPro Import Preparation: OPC Server Steps
          • Highlighting VersaPro Variables
          • VersaPro Array Tag Import
        • Importing LogicDeveloper Tags
          • LogicDeveloper Import Preparation: LogicDeveloper Steps
          • LogicDeveloper Import Preparation: OPC Server Steps
          • Highlighting LogicDeveloper Variables
          • LogicDeveloper Array Tag Import
        • Importing Proficy Logic Developer Tags
          • Proficy Logic Developer Import Preparation: Logic Developer Steps
          • Proficy Logic Developer Import Preparation: OPC Server Steps
          • Highlighting Proficy Logic Developer Variables
          • Proficy Logic Developer Array Tag Import
    • GE SNPX
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Variable Import Settings
      • Data Types Description
      • Address Descriptions
        • GE Micro
        • 311 Addressing
        • 313 Addressing
        • 331 Addressing
        • 341 Addressing
        • 350 Addressing
        • 360 Addressing
        • 731 Addressing
        • 732 Addressing
        • 771 Addressing
        • 772 Addressing
        • 781 Addressing
        • 782 Addressing
        • GE OPEN Addressing
        • Advanced Addressing
      • Automatic Tag Database Generation
        • Tag Hierarchy
        • Import File-to-Server Name Conversions
        • Importing VersaPro Tags
          • VersaPro Import Preparation: VersaPro Steps
          • VersaPro Import Preparation: OPC Server Steps
          • Highlighting VersaPro Variables
          • VersaPro Array Tag Import
        • Importing LogicDeveloper Tags
          • LogicDeveloper Import Preparation: LogicDeveloper Steps
          • LogicDeveloper Import Preparation: OPC Server Steps
          • Highlighting LogicDeveloper Variables
          • LogicDeveloper Array Tag Import
        • Importing Proficy Logic Developer Tags
          • Proficy Logic Developer Import Preparation: Logic Developer Steps
          • Proficy Logic Developer Import Preparation: OPC Server Steps
          • Highlighting Proficy Logic Developer Variables
          • Proficy Logic Developer Array Tag Import
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name> not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Invalid tag in block starting at <address> on device <device name>. Block deactivated
        • Write Errors
          • Unable to write to tag '<tag address>' on device '<device name>'. The service requested is either not defined or not supported
          • Unable to write to tag '<tag address>' on device '<device name>'. The user does not have sufficient privileges to process the request. Minor status error code = '<hexadecimal error code>'
          • Unable to write to tag '<tag address>' on device '<device name>'. The CPU has received a message that is out of order
          • Unable to write to tag '<tag address>' on device '<device name>'. Service request error. Minor status error code = '<hexadecimal error code>'
          • Unable to write to tag '<tag address>' on device '<device name>'. The PLC CPU's service request queue is full: please wait a minimum of 10 ms before sending another service request
          • Unable to write to tag '<tag address>' on device '<device name>'. A framing error has occurred
          • Unable to write to tag '<tag address>' on device '<device name>'. Device returned major error code '<hexadecimal error code>' and minor error code '<hexadecimal error code>'
        • Blocked Read Errors
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. The service requested is either not defined or not supported
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. The user does not have sufficient privileges to process the request. Minor status error code = '<hexadecimal error code>'
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. The CPU has received a message that is out of order
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. Service request error. Minor status error code = '<hexadecimal error code>'
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. The PLC CPU's service request queue is full: please wait a minimum of 10 ms before sending another service request
          • Unable to read '<byte count>' bytes starting at address '<start tag>' on device '<device name>'. A framing error has occurred
          • Unable to read '<number of bytes>' bytes starting at address '<tag address>' on device '<device name>'. Device returned major error code '<hexadecimal error code>' and minor error code '<hexadecimal error code>'
        • Non-Blocked Read Errors
          • Unable to read tag '<tag address>' on device '<device name>'. The service requested is either not defined or not supported
          • Unable to read tag '<tag address>' on device '<device name>'. The user does not have sufficient privileges to process the request. Minor status error code = '<hexadecimal error code>'
          • Unable to read tag '<tag address>' on device '<device name>'. The CPU has received a message that is out of order
          • Unable to read tag '<tag address>' on device '<device name>'. Service request error. Minor status error code = '<hexadecimal error code>'
          • Unable to read tag '<tag address>' on device '<device name>'. The PLC CPU's service request queue is full: please wait a minimum of 10 ms before sending another service request
          • Unable to read tag '<tag address>' on device '<device name>'. A framing error has occurred
          • Unable to read tag '<tag address>' on device '<device name>'. Device returned major error code '<hexadecimal error code>' and minor error code '<hexadecimal error code>'
        • Automatic Tag Database Generation Messages
          • Unable to generate a tag database for device <device name>. Reason: Low memory resources
          • Unable to generate a tag database for device <device name>. Reason: Import file is invalid or corrupt
          • Database Error: Tag '<orig. tag name>' exceeds 256 characters. Tag renamed to '<new tag name>'
          • Database Error: Array tags '<orig. tag name><dimensions>' exceed 256 characters. Tags renamed to '<new tag name><dimensions>'
          • Database Error: Datatype '<type>' for tag '<tag name>' is currently not supported. Tag not created
          • Database Error: Datatype '<type>' for tag '<tag name>' not found in import file. Setting to default
          • Database Error: Logic Developer Variable Arrays are currently not supported. Array Tag(s) '<array tag name>' not created
          • Database Error: No Reference Address found for tag '<tag name>' in import file. Tag not created
          • Database Error: Only variables with Data Source '<data source name>' are imported. Data Source '<data source name>' is not supported
          • Database Error: Data type '<type>' arrays are currently not supported. Tag '<array tag name>' not created
    • Honeywell HC900 Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
          • Automatic Tag Database Generation
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — TCP/IP
        • Device Properties — Settings
        • Device Properties — Block Sizes
        • Device Properties — Tag Generation Settings
        • Device Properties — Tag Import
      • Data Types Description
      • Address Descriptions
        • Output Coils
        • Input Coils
        • Internal Registers
        • Holding Registers
      • Optimizing Your Honeywell HC Ethernet Communications
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Failure to initiate 'winsock.dll'
          • Bad address in block [x to y] on device '<device name>'
          • Bad received length [x to y] on device '<device name>'
        • Tag Import Specific Messages
          • Could not read record <record> - Buffer length exceeded
          • No tags imported - Unsupported file format
          • Could not parse expected data (field <field>, record <record>)
          • Invalid decimal address (field <field>, record <record>)
          • Invalid tag name '<name>' (field <field>, record <record>) could not be coerced into valid name
          • Invalid tag name '<old name>' (field <field>, record <record>) changed to '<new name>'
          • Invalid datatype (field <field>, record <record>)
          • Invalid access (field <field>, record <record>)
          • Invalid type (field <field>, record <record>)
          • Invalid tag type (field <field>, record <record>)
          • Could not import tag in record <record> - unknown block name
          • Invalid block name '<name>' (field <field>, record <record>) could not be coerced
          • Invalid block name '<old name>' (field <field>, record <record>) changed to '<new>
      • Appendix: Creating Tag Import Files
    • Honeywell UDC Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
          • Automatic Tag Database Generation
        • Device Properties — TCP/IP
        • Device Properties — Settings
        • Device Properties — Block Sizes
      • Data Types Description
      • Address Descriptions
        • UDC 2500 Addressing
        • UDC 3200 Addressing
        • UDC 3500 Addressing
      • Optimizing Your Honeywell UDC Ethernet Communications
      • Error Descriptions
        • Address '<address>' is out of range for the specified device or register
        • Array support is not available for the specified address: '<address>'
        • Bad address in block [x to y] on device '<device name>'
        • Bad received length [x to y] on device '<device name>'
        • Data Type '<type>' is not valid for device address '<address>'
        • Device '<device name>' block request [x to y] responded with exception <code>
        • Device '<device name>' is not responding.
        • Device address '<address>' contains a syntax error.
        • Device address '<address>' is not supported by model '<model name>.'
        • Device address '<address>' is Read Only.
        • Failure to initiate 'winsock.dll'
        • Missing address.
        • Unable to write to address '<address>' on device '<device>': Device responded with exception code '<code>'
        • Unable to write to '<address>' on device '<device name>.'
        • Modbus Exception Codes
    • Honeywell UDC Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Settings
        • Device Properties — Block Sizes
      • Data Types Description
      • Honeywell UDC Serial 3000/3300 Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address <address> contains a syntax error
          • Address <address> is out of range for the specified device or register
          • Data Type <type> is not valid for device address <address>
          • Device address <address> is Read Only
          • Array size is out of range for address <address>
          • Array support is not available for the specified address: <address>
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on <channel name> [<error mask>]
        • Device Status Messages
          • Device <device name> is not responding
          • Unable to write to <address> on device <device name>
        • Honeywell UDC Serial Device Specific Messages
          • Bad address in block [<start address> to <end address>] on device <device name>
    • IDEC Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
          • Automatic Tag Database Generation
        • Device Properties — Tag Import Settings
      • Data Types Description
      • Address Descriptions
        • Micro1 Addressing
        • Micro3 Addressing
        • MicroSmart Addressing
        • OpenNet Controller Addressing
        • FA2 Addressing
        • FA2J Addressing
        • FA3S-CP11 Addressing
        • FA3S-CP12 Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name> not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Bad address in block [<start address> to <end address>] on device '<device name>'
        • Automatic Tag Database Generation Messages
          • Tag '<tag name>' not imported because model does not support type
          • Error parsing import file record number <record number>
          • Import file record <record number> could not be processed due to buffer overflow
          • Exception encountered during tag import. Bad tag information file
          • Tag import failed due to low memory resources
          • Description truncated for import file record number <record number>
          • Imported tag name '<old name>' is invalid. Name changed to '<new name>'
    • IEC 61850 MMS Client
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Automatic Configuration
        • Device Properties — Connection
          • Certificate Store
        • Device Properties — Communication
        • Device Properties — Control
        • Device Properties — Tag Database Settings
      • Data Types Description
      • Address Descriptions
        • Supported Functional Constraints
      • Event Log Messages
        • A device was added to channel <channel name> that has been set to Optimize. Since the channel has been set to optimize memory allocation, a brief loss of data may have occurred.
        • Error: Device <device name>, Cannot write to structured data attribute <MMS address>.
        • Channel initialized with insecure configuration. Devices configured with the Certificate Authentication mechanism can not connect.
        • <Channel name> | <MMS security error occurred. | Reason = <reason>.
        • <Channel name> | TLS Instance Certificate information. | Valid = Yes/No, Expired = Yes/No, Invalid signature = Yes/No, Unspecified error = Yes/No, Self-signed = Yes/No.
        • <Channel name> | <TLS security error occurred. | Reason = <reason>.
        • <Channel name> | Trust store certificate counts. | Total = <count>, Valid = <count>, Expired = <count>, Invalid signature = <count>, Unspecified error = <count>, Self-signed = <count>.
        • <Channel name.Device name> | <MMS security error occurred. | Reason = <reason>.
        • <Channel name.Device name> | <TLS security error occurred. | Reason = <reason>.
        • Duplicate address <tag address> produced from SCL file. Tag will not be created.
        • Empty trust store encountered. Channel initialized with insecure configuration. Devices configured with the Certificate Authentication Mechanism can not connect.
        • Error: Report control block attribute <attribute-dataset> does not reference a valid data set.
        • Failed to open SCL file <file path>.
        • Invalid address <tag address> produced from SCL file. Tag will not be created.
        • Error: Device <device name>, Address <MMS address>, Invalid bit string data <bit string>. Please enter a string of characters '0' and '1'.
        • Error: Device <device name>, Address <MMS address>, Invalid data type <data type> for data attribute.
        • Error: Device <device name>, Address <MMS address>, Invalid octet string data <octet string>. Please enter an even number of hexadecimal digits (for example, "00 01 C3").
        • Error: Device <device name>, Invalid object <MMS address>.
        • Error: Device <device name>, Invalid report control block address <MMS address>.
        • <Channel name> | MMS Instance Certificate information. | Valid = Yes/No, Expired = Yes/No, Invalid signature = Yes/No, Unspecified error = Yes/No, Self-signed = Yes/No.
        • No ConnectedAP of SubNetwork <SubNetwork> with IED <IED> and AccessPoint <AccessPoint> found in file <file path>.
        • Non-RSA private key encountered. Channel initialized with insecure configuration. Devices configured with the Certificate Authentication Mechanism cannot connect.
        • Selected AccessPoint <AccessPoint> not found in file <file path>.
        • Selected IED <IED name> not found in file <file path>.
        • Selected SubNetwork <SubNetwork> not found in file <file path>.
        • Error: Device <device name>, Structured data attribute <MMS address> cannot be applied to tag.
        • <Channel name.Device name> | Unable to connect. Channel is not initialized with certificates. | IP address = <IP address>.
        • <channel name.device name> | Unable to write to address on device. | Address = <MMS address>
    • IEC 60870-5-101 Client
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Channel Properties — 60870 Settings
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Auto-Demotion
        • Device Properties — Time Synchronization
        • Device Properties — Communications
          • Event Playback
          • Timing
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Device failed to complete clock synchronization.
        • Device failed to complete counter interrogation.
        • Device failed to complete general interrogation.
        • Device <device name> failed to complete test procedure.
        • Device <device name> is not responding.
        • Error loading XML file. <Reason>.
        • Error loading XML file for channel. Unbalanced mode does not support a link address size of zero.
        • Error loading XML file for device. When the transmission mode is balanced, all devices must have the same link address. The link address of device is link address.
        • Error loading XML file for device. Common Address is invalid. Valid range is <low limit> to <high limit>.
        • Error loading XML file for device. The link address and common address pair is already in use on '<device name>'. Link and common address pairs must be unique.
        • Error loading XML file for device. Link Address is invalid. Valid range is <low limit> to <high limit>.
        • Read failed on tag.
        • Read failed on tag due to data type mismatch.
        • Reverting channel <channel name> link mode to Unbalanced Transmission. Balanced Transmission is not compatible with communication serialization or port sharing.
        • Too many events received in device name; the buffer has overflowed. Increase the event playback buffer size.
        • Unable to write to address <address> on device <device>.
        • Write failed on tag.
      • Reference Material
        • IEC 60870-5-101 Interoperability Guide
    • IEC 60870-5-104 Client
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communications
        • Channel Properties — Settings
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Auto-Demotion
        • Device Properties — Time Synchronization
        • Device Properties — Communications
          • Timing
          • Event Playback
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Device failed to complete clock synchronization.
          • Device failed to complete counter interrogation.
          • Device failed to complete general interrogation.
          • Device failed to complete test procedure.
          • Device is not responding.
          • Error loading XML file for device. Common address is invalid. Valid range is low limit to high limit.
          • Error loading XML file for device. Common Address is already used by a device.
          • Read failed on tag.
          • Read failed on tag due to data type mismatch.
          • Too many events received in device name; the buffer has overflowed. Increase the event playback buffer size.
          • Unable to write to address on device.
          • Write failed on tag.
        • IEC 60870-5-104 Interoperability Guide
    • Intelligent Actuator Super SEL
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
      • Data Types Description
      • Address Descriptions
        • Super SEL Addressing
          • Input Port (Super SEL)
          • Output Port (Super SEL)
          • Flag (Super SEL)
          • Axis Status and Control
          • Point Data (Super SEL.
          • Variable
          • Program Execution(Super SEL)
          • Test Controller
          • Reset Controller(Super SEL)
          • Error Messaging
        • X-Sel Addressing
          • Input Port (X-Sel)
          • Output Port (X-Sel)
          • Flag (X-Sel)
          • Axis Status and Control (X-Sel)
          • Point Data (X-Sel.
          • Variable (X-Sel)
          • Program Execution (X-Sel.
          • Test Controller (X-Sel)
          • Reset Controller (X-Sel)
          • Error Messaging (X-Sel)
      • Event Log Messages
        • Address Validation
          • Missing Address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm properties on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>
        • Device-Specific Messages
          • Bad address in block [<start address> to <end address>] on device '<device name>
    • InTouch Client
      • Overview
      • External Dependencies
      • System Configuration
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
        • Device Properties — Tag Import Settings
        • Device Properties — Mode
      • Automatic Tag Database Generation
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address <address> contains a syntax error
          • Address <address> is out of range for the specified device or register.
          • Data Type <type> is not valid for device address <address>
          • Device address <address> is Read Only
          • Array size is out of range for address <address>
          • Array support is not available for the specified address: <address>
        • Device Status Messages
          • Device <device name> is not responding
          • Unable to write to <address> on device <device name>
        • Driver Error Messages
          • Low resources (OS error: <error code>)
          • Connection to InTouch failed. Server runtime process must be configured for interactive mode
        • Automatic Tag Database Generation Messages
          • Tag import failed (OS error: <error code>)
          • Tag <tag name> could not be imported due to unresolved datatype
          • Tag <tag name> could not be imported due to name conflict
          • Tag <tag name> could not be imported due to address length limitation
          • Imported tag name changed from <original name> to <new name>
          • Tag browser error
    • IOtech PointScan 100
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — TCP/IP
        • Device Properties — Blocks
      • Addressing RS-485 PointScan 200 Devices Over the Ethernet
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use this device driver
        • Device Specific Messages
          • Bad address in block [<start address> to <end address>] on device '<device name>'
          • Block size mismatch reading [<start address> to <end address>] on device '<device name>
          • Block request [<start address> to <end address>] on device '<device name>.' responded with exception = n
    • Keyence Ethernet
      • Overview
      • Setup
        • Channel Properties
          • Channel Properties — General
          • Channel Properties — Ethernet Communications
          • Channel Properties — Write Optimizations
          • Channel Properties — Advanced
        • Device Properties
          • Device Properties — General
          • Device Properties — Scan Mode
          • Device Properties — Timing
          • Device Properties — Auto-Demotion
          • Device Properties — Communication Parameters
          • Device Properties — Block Sizes
      • Data Types Description
      • KV Series Addressing
      • Event Log Messages
        • Event Log Messages
        • Device Response Error Codes
        • Event Log Messages
    • Krauss Maffei MC4 Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Communications Parameters
        • Device Properties — Addressing Options
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address <address> contains a syntax error
          • Data type <type> is not valid for device address <address>
          • Device address <address> is read only
        • Device Status Messages
          • Device <device name> is not responding
          • Unable to write to <address> on device <device name>
        • Driver Error Messages
          • Winsock initialization failed (OS error = n)
          • Winsock V1.1 or higher must be installed to use the KraussMaffei MC4 Ethernet Driver
          • Device <device name> detected a message size error(Tag <address>)
          • Device <device name> detected an invalid parameter handle in message (Tag <address>)
          • Device <device name> detected an invalid memory address or address can't be written (Tag <address>)
          • Device <device name> detected an invalid memory address (Tag <address>)
          • Device <device name> detected an invalid data character in message (Tag <address>)
          • Device <device name> detected a number of parameters error in message(Tag <address>)
          • Device <device name> failed to convert decimal response to a Float or Double number (Tag <address>)
          • Device <device name> detected a parameter size error in message (Tag <address>)
          • Device <device name> detected a parameter value that was too large (Tag <address>)
          • Device <device name> detected a parameter value that was too small (Tag <address>)
    • Lufkin Modbus
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Block Sizes
        • Device Properties — Data Encoding
        • Device Properties — Framing
        • Device Properties — Error Handling
        • Device Properties — Card Settings
      • Data Types Description
      • Address Descriptions
        • Statistics Items
      • Error Descriptions
        • Address Validation
          • Address <address> is out of range for the specified device or register.
          • Array size is out of range for address <address>.
          • Array support is not available for the specified address: <address>.
          • Data Type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is not supported by model <model name>.
          • Device address <address> is read only.
          • Missing address
        • Serial Communications
          • COMn does not exist.
          • COMn is in use by another application.
          • Error opening COMn [OS Error == <OS Error ID>].
          • Serial communications error on channel <channel name> [<error mask>].
          • Unable to set comm parameters on COMn [OS Error == <OS Error ID>].
        • Device Status Messages
          • Device <device name> is not responding.
          • Unable to write to <address> on device <device name>.
          • Unable to write to address <address> on device <device>: Device responded with exception code <code>.
          • Write failed for <tag name> on device <device name>. Maximum path length of <number> exceeded.
        • Lufkin Modbus Specific Messages
          • Bad address in block [<start address> to <end address>] on device <device name>.
          • Bad array spanning [<address> to <address>] on device <device>.
        • Modbus Exception Codes
  • M Drivers
    • Memory Based
      • Overview
      • setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address '<address>' is out of range for the specified device or register
        • Array size is out of range for address <address>
        • Array support is not available for the specified address: <address>
        • Could not allocate memory for simulated device
        • Could not <load / save> item state data. Reason: <reason>
        • Data Type <type> is not valid for device address <address>
        • Device address <address> contains a syntax error
        • Device address <address> is not supported by model <model name>
        • Device address <address> is read only
        • Missing address
    • Mettler Toledo
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
        • Device Properties — Options
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Device address '<address>' contains a syntax error
        • Address '<address>' is out of range for the specified device or register
        • Data Type '<type>' is not valid for device address '<address>'
        • Device address <address> is read only
        • Communications error on '<channel name>' [<error mask>]
        • COMn does not exist
        • COMn is in use by another application
        • Error opening COMn
        • Unable to set comm parameters on COMn
        • Device '<device name>' has not sent any unsolicited updates within the currently configured data freshness tolerance period. Data associated with this device will be considered invalid
    • Micro-DCI
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Settings
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Settings
      • Data Types Description
      • Address Descriptions
        • 53MC1000 Addressing
        • 53MC2000 Addressing
        • 53MC2002 Addressing
        • 53MC4000 Addressing
        • 53MC5000 Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address <address> contains a syntax error
          • Address <address> is out of range for the specified device or register
          • Device address <address> is not supported by model <model name>
          • Data Type <type> is not valid for device address <address>
          • Device address <address> is Read Only
          • Received unexpected response for tag <address> on device <device name>
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on <channel name> [<error mask>]
        • Device Status Messages
          • Device <device name> is not responding
          • Unable to write to <address> on device <device name>
        • Device Specific Messages
          • Bad address in block [<start address> to <end address>] on device <device name>
    • Mitsubishi CNC Ethernet
      • Overview
      • Setup
        • Channel Properties
          • Channel Properties — General
          • Channel Properties — Ethernet Communications
          • Channel Properties — Write Optimizations
          • Channel Properties — Advanced
        • Device Properties
          • Device Properties — General
          • Device Properties — Scan Mode
          • Device Properties — Timing
          • Device Properties — Auto-Demotion
          • Device Properties — 32-Bit Data
          • Device Properties — Network Parameters
      • Multi-Level Networks
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
      • Event Log Messages
        • Event Log Messages
    • Mitsubishi Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — 32-Bit Data
        • Device Properties — Communications Parameters
        • Device Properties — Time and Date Synchronization
        • Multi-level Networks
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • Mitsubishi A Series Address Descriptions
        • Mitsubishi FX3U Series Address Descriptions
        • Mitsubishi L Series Address Descriptions
        • Mitsubishi Q Series Address Descriptions
        • Mitsubishi iQ-R Series Address Descriptions
        • Mitsubishi iQ-F Series Address Descriptions
        • Mitsubishi QnA Series Address Descriptions
      • Event Log Messages
        • Event Log Messages
      • PLC Setup
        • A Series PLC Setup
        • FX3U Series PLC Setup
        • L Series PLC Setup
        • L Series Built-in Ethernet Port PLC Setup
        • QnA Series PLC Setup
        • Q Series PLC Setup
        • Q Series PLC Setup
        • Q Series PLC Setup
        • Q Series Built-in Ethernet Port PLC Setup
    • Mitsubishi Ethernet Driver for Edge
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
          • Device Properties — Auto-Demotion
        • Device Properties — Timing
        • Device Properties — 32-Bit Data
        • Device Properties — Communications Parameters
        • Device Properties — Time and Date Synchronization
        • Multi-level Networks
      • Optimizing Your Mitsubishi Ethernet Communications
      • Data Types Description
      • Address Descriptions
        • Mitsubishi A Series Address Descriptions
        • Mitsubishi FX3U Series Address Descriptions
        • Mitsubishi L Series Address Descriptions
        • Mitsubishi Q Series Address Descriptions
        • Mitsubishi iQ-R Series Address Descriptions
        • Mitsubishi iQ-F Series Address Descriptions
        • Mitsubishi QnA Series Address Descriptions
      • Event Log Messages
        • Event Log Messages
      • PLC Setup
        • A Series PLC Setup
        • FX3U Series PLC Setup
        • L Series PLC Setup
        • L Series Built-in Ethernet Port PLC Setup
        • QnA Series PLC Setup
        • Q Series PLC Setup
        • iQ-R Series PLC Setup
        • iQ-F Series PLC Setup
        • Q Series Built-in Ethernet Port PLC Setup
    • Mitsubishi FX
      • Overview
      • Setup
      • Data Types Description
      • Address Descriptions
        • FX Addressing
        • FX0 Addressing
        • FX0N Addressing
        • FX2N Addressing
        • FX3U Addressing
      • Event Log Messages
        • Event Log Messages
        • Error Mask Definitions
      • Appendix: Ethernet Encapsulation Examples
    • Mitsubishi FX Net
      • Overview
      • Setup
        • PLC Parameter Settings
      • Data Types Description
      • Address Descriptions
        • FX Addressing
        • FX2C Addressing
        • FX0N Addressing
        • FX2N Addressing
        • FX3U Addressing
        • FXOpen Addressing
      • Event Log Messages
        • Event Log Messages
        • Error Mask Definitions
    • Mitsubishi Serial
      • Overview
      • Setup
        • Channel Properties
          • Channel Properties — General
          • Channel Properties — Serial Communications
          • Channel Properties — Write Optimizations
          • Channel Properties — Advanced
        • Device Properties
          • Device Properties — Identification
          • Device Properties — Scan Mode
          • Device Properties — Timing
          • Device Properties — Auto-Demotion
          • Device Properties — Bridging
          • Device Properties — 32-Bit Data
      • Multi-Level Networks
      • Data Types Description
      • Address Descriptions
        • A Series Address Descriptions
        • Q Series Address Descriptions
      • Event Log Messages
        • Event Log Messages
        • Error Mask Definitions
      • Appendix: PLC Setup
        • A1SJ71C24-R2 Settings and Diagrams
        • A1SJ71C24-R4 Settings and Diagrams
        • AJ71C24-S8 Setting and Diagrams
        • QJ71C24N Configuration
    • Modbus ASCII Serial
      • Overview
      • Setup
        • Channel Setup
          • Channel Properties — General
          • Channel Properties — Serial Communications
          • Channel Properties — Write Optimizations
          • Channel Properties — Advanced
          • Channel Properties — Communication Serialization
        • Device Setup
          • Device Properties — General
          • Device Properties — Scan Mode
          • Device Properties — Timing
          • Device Properties — Auto-Demotion
          • Device Properties — Tag Generation
          • Device Properties — Block Sizes
          • Device Properties — Variable Import Settings
          • Device Properties — Settings
          • Device Properties — Error Handling
      • Automatic Tag Database Generation
      • Data Types Description
      • Address Descriptions
        • Modbus ASCII Addressing
          • Function Codes Description
        • Flow Computer Addressing
        • Flow Automation Addressing
      • Event Log Messages
        • Event Log Messages
        • Modbus Exception Codes
        • Error Mask Definitions
    • Modbus Plus
      • Overview
      • External Dependencies
      • Setup
        • Channel Properties
          • Channel Properties — General
          • Channel Properties — Write Optimizations
          • Channel Properties — Advanced
          • Channel Properties — Adapter
        • Device Properties
          • Device Properties — General
            • Device ID
          • Device Properties — Scan Mode
          • Device Properties — Timing
          • Device Properties — Auto-Demotion
          • Device Properties — Tag Generation
          • Device Properties — Block Sizes
          • Device Properties — Variable Import Settings
          • Device Properties — Settings
      • Automatic Tag Database Generation
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • Modbus Addressing
          • Function Codes Description
          • Configuring the Device for Global Data Communications
        • Event Log Messages
          • Event Log Messages
          • Modbus Exception Codes
    • Modbus RTU Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Communication Serialization
        • Channel Properties — Write Optimizations
        • Channel Properties — Serial Communications
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Ethernet Encapsulation
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Settings
        • Device Properties — Block Sizes
        • Device Properties — Variable Import Settings
        • Device Properties — Framing
        • Device Properties — Error Handling
      • Automatic Tag Database Generation
      • Statistics Items
      • Data Types Description
      • Address Descriptions
        • Modbus Addressing
        • Magnetek GPD 515 Drive Addressing
        • Elliott Flow Computer Addressing
        • Daniels S500 Flow Computer Addressing
        • Dynamic Fluid Meter Addressing
        • Omni Flow Computer Addressing
          • Omni Custom Packets
          • Omni Raw Data Archive
          • Omni Text Reports
          • Omni Text Archive
        • Function Codes Description
      • Using API Commands
        • Configuration API Service — Channel Properties
        • Configuration API Service — Device Properties
      • Event Log Messages
        • Event Log Messages
        • Error Mask Definitions
        • Modbus Exception Codes
    • Modbus Server Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Timing
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Memory
          • Memory Addressing
      • Data Types Description
      • Address Descriptions
        • Modbus Addressing
        • Daniels/Enron Addressing
      • Event Log Messages
        • Event Log Messages
        • Error Mask Definitions
        • Modbus Exception Codes
    • Modbus TCP/IP Ethernet
      • Overview
        • Supported Device Models
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Channel Properties — Ethernet
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Variable Import Settings
        • Device Properties — Unsolicited
          • Modbus Client & Server Considerations
        • Device Properties — Error Handling
        • Device Properties — Ethernet
        • Device Properties — Settings
        • Device Properties — Block Sizes
        • Configuration API Modbus Example
          • Enumerations
            • Device Model Enumerations
      • Automatic Tag Database Generation
        • Importing from Custom Applications
      • Optimizing Modbus Ethernet Communications
      • Data Types Description
      • Address Descriptions
        • Driver System Tag Addresses
        • Function Codes Description
        • Applicom Addressing
          • Generic Modbus Addressing
        • TSX Quantum
        • TSX Premium
        • CEG Addressing
        • Fluenta Addressing
        • Instromet Addressing
        • Mailbox Addressing
        • Modbus Addressing
        • Roxar Addressing
      • Statistics Items
      • Event Log Messages
        • Event Log Messages
        • Modbus Exception Codes
      • Appendix A — Channel Properties
      • Appendix B — Device Properties
      • Appendix C — Tag Properties
    • Modbus TCP/IP Ethernet for Edge
      • Overview
        • Setup
        • Supported Device Models
      • Properties
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Channel Properties — Ethernet
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Variable Import Settings
        • Device Properties — Error Handling
        • Device Properties — Ethernet
        • Device Properties — Settings
        • Device Properties — Block Sizes
        • Configuration API Modbus Example
          • Enumerations
            • Device Model Enumerations
      • Automatic Tag Database Generation
        • Importing from Custom Applications
      • Optimizing Modbus Ethernet Communications
      • Data Types Description
      • Address Descriptions
        • Driver System Tag Addresses
        • Function Codes Description
        • Modbus Addressing
      • Statistics Items
      • Event Log Messages
        • Event Log Messages
        • Modbus Exception Codes
      • Appendix A — Channel Properties
      • Appendix B — Device Properties
      • Appendix C — Tag Properties
    • MQTT Client
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Advanced
        • Channel Properties — MQTT Server
        • Channel Properties — Timing
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
          • Data Types Supported through Automatic Tag Generation
      • Data Types Description
      • Timestamp Behavior
      • Quality Behavior
      • Tag Address Descriptions
        • Appendix — Tag Addressing Examples
      • Event Log Messages
        • Event Log Messages
        • Unable to generate a tag database for '<channel>'.'<device>': <Reason>
    • MTConnect
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Advanced
        • Channel Properties — Write Optimizations
        • Device Discovery Procedure
          • Device Discovery Settings
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communications
      • Automatic Tag Database Generation
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Data Type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is read only.
        • Automatic Tag Database Generation Messages
          • Unable to generate a tag database for device <device>. Reason: Agent did not respond.
          • Unable to generate a tag database for device <device>. Reason: Agent returned MTConnect error: <error-string>.
          • Unable to generate a tag database for device <device>. Reason: Error in creating MTConnect packet.
          • Unable to generate a tag database for device <device>. Reason: HTTP error: <error-code>.
          • Unable to generate a tag database for device <device>. Reason: Internal error.
          • Unable to generate a tag database for device <device>. Reason: Invalid response from agent.
          • Unable to generate a tag database for device <device>. Reason: Response from agent failed schema validation.
          • Unable to generate a tag database for device <device>. Reason: Unable to connect to the agent.
          • Unable to generate a tag database for device <device>. Reason: Unable to transmit request to the agent.
        • Current Update Mode Command Messages
          • <channel name>.<device name> | Device is not responding. | ID = <ID>
          • Read for the data item <address> on device <device> failed. Reason: Agent reported data is UNAVAILABLE.
          • Read for the data item <address> on device <device> failed. Reason: Response from agent failed schema validation.
          • Read for the data items <address> on device <device> failed. Reason: Error in creating MTConnect packet.
          • Read for the data items <address> on device <device> failed. Reason: Internal error.
          • Read for the data items <address> on device <device> failed. Reason: Invalid data item ID.
          • Read for the data items <address> on device <device> failed. Reason: Invalid response from agent.
          • Read for the data items <address> on device <device> failed. Reason: Received HTTP error <error-code>.
          • Read for the data items <address> on device <device> failed. Reason: Received MTConnect error <error-string>.
          • Read for the data items <address> on device <device> failed. Reason: Unable to connect to the agent.
          • Read for the data items <address> on device <device> failed. Reason: Unable to transmit request to the agent.
          • Read for the data items <address> on device <device> failed. Reason: XML Validation Error: The node is neither valid nor invalid because no DTD / schema declaration was found.
          • <schema file> failed to load/; may cause validation errors.
          • Unable to bind to adapter: <network adapter name>. Connect failed.
        • Sample Update Mode Command
          • <channel name>.<device name> | Device is not responding. | ID = <ID>
          • Sample update mode failure. | Context = <Request>, Reason = Received HTTP error: <error-code>.
          • Sample update mode failure. | Context = <Request>, Reason = Internal error.
          • Sample update mode failure. | Context = <Request>, Reason = Invalid response from agent.
          • Sample update mode failure. | Context = <Request>, Reason = Received MTConnect error: <error-string>.
          • Sample update mode failure. | Context = <Request>, Reason = Schema validation error: <error-string>.
          • Sample update mode failure. | Context = <Request>, Reason = Unable to connect to the agent.
          • Sample update mode failure. | Context = <Request>, Reason = Unable to transmit request to the agent.
        • MTConnect Error Codes
        • HTTP Response Codes
  • O-P Drivers
    • ODBC Client
      • Overview
      • External Dependencies
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Data Source Settings
          • Data Source Authentication
        • Device Properties — General
        • Device Properties — Tag Generation
        • Device Properties — Data Source Access Method
          • Fixed Table
            • Table Selection
            • Automatic Tag Generation Options
            • Timing Options — Fixed
          • Dynamic Tables
            • Table Selection
            • Automatic Tag Generation Options
            • Timing Options — Dynamic
          • Query
            • Building a Valid Query Statement
            • Miscellaneous Query Trigger Definition
            • Timing Options — Query
            • Automatic Tag Generation Options
            • Using the Query Access Method
            • Data Source Query Format
            • Modifying a Query Statement
          • Stored Procedure
            • Creating the Tag Database
            • Selecting a Different Stored Procedure
          • Choosing between the Query or the Stored Procedure Access Method for Stored Procedure Execution
      • Running as a System Service
        • Connecting Remotely in System Service Mode
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address.
          • Device address <address> contains a syntax error.
          • Data Type <type> is not valid for device address <address>.
          • Device address <address> is read only.
        • Device Status Messages
          • Write request rejected on read only item reference <channel name><device name><address>.
        • ODBC Client Driver Specific Messages
          • Call to execute stored procedure <stored procedure name> on device <device name> failed. (Reason: ODBC Specific Error).
          • Data source <data source name> is configured as Read Only (all writes will be rejected).
          • Query validation failed due to the following: (Reason: ODBC Specific Error).
          • Unable to retrieve table names. (Reason: ODBC Specific Error).
          • Unable to retrieve table column names. (Reason: ODBC Specific Error).
          • Unable to retrieve table row count. (Reason: ODBC Specific Error).
          • Unable to retrieve stored procedure names. (Reason: ODBC Specific Error).
          • Unable to retrieve supported access methods. (Reason: ODBC Specific Error).
          • Unable to connect to data source on channel <channel name>. (Reason: ODBC Specific Error).
          • Unable to open recordset on device <device name>. (Reason: ODBC Specific Error).
          • Unable to query recordset on device <device name>. (Reason: ODBC Specific Error).
          • Unable to retrieve database value for tag <tag address> on device <device name>.
          • Unable to write database value <value> for tag <tag address> on device <device.
          • Unable to read internal tag <tag address> on device <device name>. (Reason: ODBC Specific Error).
          • Unable to write to internal tag <tag address> on device <device name> (Reason: ODBC Specific Error).
          • Unable to read parameter tag <tag address>. (Reason: ODBC Specific Error).
          • Unable to write to parameter tag <tag address> (Reason: ODBC Specific Error).
          • Unable to execute stored procedure '<stored procedure name> on device <device. (Reason: ODBC Specific Error).
          • Unable to write to item <tag address> (Reason: ODBC Specific Error).
    • OMNI Flow Computer
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Time Synchronization
        • Device Properties — Data Access
        • Device Properties — Block Sizes
        • Device Properties — Framing and Error Handling
        • Device Properties — EFM Meters
          • EFM Cache
        • Meter Properties — General
        • Meter Properties — Configuration
          • EFM Mapping
            • EFM Alarm Mapping
            • EFM Event Mapping
            • EFM History Mapping
            • EFM History Mapping — Gas Models
            • EFM History Mapping — Liquid Models
            • CSV Import/Export
      • Data Types Descriptions
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is not supported by model '<model name>'
          • Device address '<address>' is Read Only
          • Missing address
          • Received block length of '<received length>' does not match expected length of '<expected length>' for address '<address>' on device '<device>'
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
          • Unable to write to address '<address>' on device '<device>': Device responded with exception code '<code>'
          • Write failed for '<tag name>' on device '<device name>'. Maximum path length of '<number>'
        • OMNI Flow Computer Specific Messages
          • '<device name>' - A starting address of '<address>' in the archive’s record structure is invalid. May not receive data for address '<address>'
          • '<device name>' - Alarm record parse for device failed
          • '<device name>' - Archive '<archive number>' is not configured correctly for address '<address>'. Max number of records is zero
          • '<device name>' - Archive record contains an invalid address. BOOL, 8-byte strings, and 16-byte strings are not supported
          • '<device name>' - Archive record for address '<address>' contains an unexpected number of bytes. Expected '<number of bytes>' bytes, received '<number of bytes>' bytes
          • '<device name>' - Config data attribute for meter tap location read from device address '<address>' is '<value>', and does not map to any valid meter tap locations. Expecting 0 for flange, or 1 for pipe. Defaulting to flange
          • '<device name>' - Config data attribute for meter type read from device address '<address>' is '<value>', and does not map to any valid meter types. Expected values are 0, 2, or 3 for orifice, 1 for turbine, 4 or 8 for ultra sonic, 5 for vcone, and 9 for coriolis.
          • <device name>' - Config data attribute for static pressure tap read from device address '<address>' is '<value>', and does not map to any valid static pressure tap locations. Expecting 0 for up, or 1 for down. Defaulting to up
          • '<device name>' - Config data attribute for static pressure unit read from device address '<address>' is '<value>', and does not map to a valid pressure unit. Expecting 0 for kPa, 1 for Bar, or 2 for kg/cm2. Defaulting to kPa
          • '<device name>' - Config data attribute for totalizer digits read from the device address '<address>' is '<value>', and does not map to a valid number of totalizer digits. Expecting 0 for 9 digits, or 1 for 8 digits. Defaulting to 9 digits
          • '<device name>' - Date format for address '<address>' is invalid. Device returned '<value>', valid values are 0 or 1
          • '<device name>' - Device Firmware version '<Firmware version>' is not supported by the '<model name>' model
          • '<device name>' - Device password write not successful. Value in response is different from the written value
          • '<device name>' - Event record parse for device failed
          • '<device name>' - Failed to read EFM pointer file. <Extended Error>
          • '<device name>' - Failed to write EFM pointer file. <Extended Error>
          • '<device name>' - Meter and shared archives are not in sync. Records will only contain flow data (no analysis)
          • '<device name>' - Meter archive record parse failed
          • '<device name>' - Read invalid Firmware version '<Firmware version>' from address '<address>', config upload complete
          • '<device name>' – Read phase of time sync not successful. Value in response is different from the written value.
          • '<device name>' - Shared '<archive type>' archive address is not configured, records will only contain flow data (no analysis)
          • '<device name>' - Shared archive record parse failed
          • '<device name>' - The <archive type> mapping contains more configured attributes than the device. Some attributes will not contain valid data
          • '<device name>' - The max alarm archive size was changed from '<previous size>' to '<current size>'
          • '<device name>' - The max event archive size was changed from '<previous size>' to '<current size>'
          • '<device name>' - Time sync write not successful. Value in response is different from the written value
          • '<device name>' - Unable to read '<number of registers>' registers in config register block at address '<address>'
          • '<device name>' - Unable to read date format register for address '<address>'. Response is not the correct size
          • '<device name>' - Unable to read index registers. Response is not the correct size
          • '<device name>' - Unable to read record format registers for address '<address>'. Response is not the correct size
          • '<device name>' - Unable to write requested record register for address '<address>'. Wrote '<value>', read back '<value>'
          • '<device name>' - Unable to write requested record register for address '<address>'. Response is not the correct size
          • Alarm mapping for address '<address>' is invalid and will be ignored
          • Alarm state for address '<address>' is invalid. Setting the state to <state>
          • Alarm type for address '<address>' is invalid. Setting the type to <type>
          • Bad address in block [<start address> to <end address>] on device '<device name>'
          • Bad array spanning [<address> to <address>] on device '<device>'
          • Device password invalid for device '<device name>'
          • Device password write for device '<device name>' was successful
          • History attribute '<attribute index>' is unknown and will be ignored
          • History mapping for attribute '<attribute name>' is invalid and will be ignored
          • Received 'needs password' exception from device '<device name>' with 'fail after successive timeouts' set to 1. Set the 'fail after successive timeouts' setting to a value greater than 1 and verify that the 'device password' setting is correct
          • Serialization of EFM data to temporary file '<file name>' failed. Reason: '<file I/O error>'
          • The '<archive type>' archive number for meter '<meter name>' is already being used. XML project load not successful
          • The shared '<archive type>' archive number is already in use by another meter. XML project load not successful
          • Unable to read '<address>' from device '<device name>'. The device is configured for broadcast writes only
          • Unable to read block address ['<start address>' to '<end address>'] on device '<device name>'. Unexpected characters in response
          • Warning loading '<mapping type>' mapping from CSV. '<warning type>'
        • Serial Communications
          • Communications error on '<channel name>' [<error mask>]
          • COMn does not exist
          • COMn is in use by another application
          • Error opening COMn
          • Unable to set comm parameters on COMn
        • Modbus Exception Codes
    • Omron FINS Ethernet
      • Overview
      • Setup
        • Channel Properties
          • Channel Properties — General
          • Channel Properties — Ethernet Communications
          • Channel Properties — Write Optimizations
          • Channel Properties — Communications Parameters
          • Channel Properties — Advanced
        • Device Properties
          • Device Properties — General
          • Device Properties — Scan Mode
          • Device Properties — Timing
          • Device Properties — Auto-Demotion
          • Device Properties — FINS Network Configuration
          • Device Properties — Run Mode Settings
          • Device Properties — Communications Parameters
        • FINS Networks
        • Multihoming
      • Data Types Description
      • Address Descriptions
        • C200H Addressing
        • C500 Addressing
        • C1000H Addressing
        • C2000H Addressing
        • CV500 Addressing
        • CV1000 Addressing
        • CV2000 Addressing
        • CVM1-CPU01 Addressing
        • CVM1-CPU11 Addressing
        • CVM1-CPU21 Addressing
        • CS1 Addressing
        • CJ1 Addressing
        • CJ2 Addressing
      • Event Log Messages
        • Main and Sub Error Codes
        • Remote Network Error
    • Omron FINS Serial
      • Overview
      • Setup
        • FINS Networks
      • Data Types Description
      • Address Descriptions
        • C200H Addressing
        • C500 Addressing
        • C1000H Addressing
        • C2000H Addressing
        • CV500 Addressing
        • CV1000 Addressing
        • CV2000 Addressing
        • CVM1-CPU01 Addressing
        • CVM1-CPU11 Addressing
        • CVM1-CPU21 Addressing
        • CS1 Addressing
        • CJ1 Addressing
        • CJ2 Addressing
      • Event Log Messages
        • Event Log Messages
        • Error Mask Definitions
        • Main and Sub Error Codes
    • Omron Host Link
      • Overview
      • Setup
        • Channel Properties — General
          • Channel Properties — Serial Communications
          • Channel Properties — Write Optimizations
          • Channel Properties — Advanced
        • Device Properties
          • Device Properties — General
          • Device Properties — Scan Mode
          • Device Properties — Timing
          • Device Properties — Auto-Demotion
          • Device Properties — Inter-Character Delay
      • Data Types Description
      • Address Descriptions
        • C20H Addressing
        • C200H Addressing
        • CQM1 Addressing
        • Open Addressing
      • Event Log Messages
        • Error Mask Definitions
    • Omron NJ Ethernet
      • Overview
      • Setup
        • Communications Routing and Timing
        • Connection Path Specification
        • Routing Examples
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communications Parameters
        • Device Properties — Options
      • Optimizing Communications
        • Optimizing the Application
        • Performance Statistics and Tuning
      • Data Types Description
      • Address Descriptions
        • Address Formats
        • Tag Scope
        • Predefined Term Tags
      • Automatic Tag Database Generation
        • Tag Hierarchy
      • Event Log Messages
        • Event Log Messages
      • Error Codes
        • Encapsulation Error Codes
        • CIP Error Codes
          • 0x01 Extended Error Codes
          • 0x0C Extended Error Codes
          • 0x1F Extended Error Codes
          • 0x20 Extended Error Codes
    • Omron Process Suite
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
      • Data Types Description
      • Address Descriptions
        • E5AF-A Address Description
        • E5AF-AH Address Description
        • E5AJ-A Address Description
        • E5AX-A Address Description
        • E5AX-AH Address Description
        • E5AX-DAA Address Description
        • E5AX-PRR Address Description
        • E5AX-VAA Address Description
        • E5CN-PT Address Description
        • E5CN-TC Address Description
        • E5EJ-A Address Description
        • E5GN-PT Address Description
        • E5GN-TC Address Description
      • Event Log Messages
        • Event Log Messages
        • Error Mask Definitions
    • Omron Toolbus
      • Overview
      • Setup
        • Channel Properties — General
          • Channel Properties — Serial Communications
          • Channel Properties — Write Optimizations
          • Channel Properties — Advanced
        • Device Properties — General
          • Device Properties — Scan Mode
          • Device Properties — Timing
          • Device Properties — Auto-Demotion
          • Device Properties — Communication Parameters
      • Data Types Description
      • CS1/CJ1 Address Descriptions
      • Event Log Messages
        • Event Log Messages
        • Error Mask Definitions
    • OPC DA Client
      • Overview
        • OPC Compliance
        • Project Architecture
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — OPC Server
        • Channel Properties — Connection
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — OPC Group
        • Device Properties — Communications Parameters
        • Device Properties — Watchdog
          • Watchdog Callback Monitoring
        • Device Properties — Import
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Add item failed for <item> on device <device>. Function error: <error code>.
        • Add item failed for <item>on device <device>s. Item error: <error code>.
        • Add watchdog item failed for <item> on device <device>. Item error: <error code>. <error description>.
        • Async Write 1.0 failed for <item> on device <device>. Callback item error: <error code>.
        • Async Write 1.0 failed for <item> on device <device>. Function error: <error code>.
        • Async Write 1.0 failed for <item> on device <device>. Item error: <error code>.
        • Async Write 2.0 failed for <item> on device <device>. Callback item error: <error code>.
        • Async Write 2.0 failed for <item> on device <device>. Function error: <error code>.
        • Async Write 2.0 failed for <item> on device <device>. Item error: <error code>.
        • Failed to acquire item management interface for device <device>.
        • Failed to add group for device <device>. Reason: <error code>.
        • Failed to connect to server on channel <channel>.
        • Failed to establish callback for device <device>.
        • Reconnecting server on channel <channel> due to GetStatus failure.
        • Reconnecting server on channel <channel> due to shutdown notification.
        • Reconnecting server on channel <channel> due to watchdog failure on device <device>.
        • Tag <tag item> on device <device> was not imported. Item failed OPC server validation.
        • Unknown data type for tag <item> on device <device>. Using default.
      • Appendix
    • OPC UA Client
      • Overview
      • Profiles
        • Supported OPC UA Server Profiles
      • Tunneling
      • Certificate Model
      • Re-establishing Connections
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — UA Server
          • Channel Properties — UA ServerBrowser
        • Channel Properties — UA Session
        • Channel Properties — Authentication
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Subscription
        • Device Properties — Communications Parameters
        • Device Properties — Connection
        • Device Properties — Monitored Items
        • Device Properties — Tag Generation
        • Address Descriptions
        • Data Types Description
        • OPC UA Data Types
      • Event Log Messages
        • Error Descriptions
          • Event Log Messages
        • Message Boxes
          • Error encountered during import item browse. Server <server> may have stopped running.
          • Items on this page may not be changed while the driver is processing tags.
          • The Lifetime Count must be a minimum of three times the Max. Keep Alive Count (Lifetime Count = <count>).
          • Please enter a username.
        • Explanations
          • Cannot connect to the server.
          • The client certificate has expired. Please use the OPC UA Configuration manager to create a new certificate.
          • The client certificate is invalid. Please use the OPC UA Configuration Manager to update the client certificate.
          • The server certificate is revoked. Please use the OPC UA Configuration Manager to update the certificate.
          • The server certificate is untrusted. Please use the OPC UA Configuration Manager to add the certificate to the client's trusted store.
          • Timeout trying to perform the operation.
    • OPC UA Client Driver for Edge
      • Overview
        • Profiles
          • Supported OPC UA Server Profiles
        • Tunneling
        • Certificate Model
        • Re-establishing Connections
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — UA Server
        • Channel Properties — UA Session
        • Channel Properties — Authentication
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Subscription
        • Device Properties — Communications Parameters
        • Device Properties — Connection
        • Device Properties — Monitored Items
      • Data Types Description
        • OPC UA Data Types
      • Address Descriptions
      • Event Log Messages
        • Error Descriptions
          • Event Log Messages
        • Message Boxes
          • Error encountered during import item browse. Server <server> may have stopped running.
          • Items on this page may not be changed while the driver is processing tags.
          • The Lifetime Count must be a minimum of three times the Max. Keep Alive Count (Lifetime Count = <count>).
          • Please enter a username.
        • Explanations
          • Cannot connect to the server.
          • The client certificate has expired. Please create a new certificate.
          • The client certificate is invalid. Please update the client certificate.
          • The server certificate is revoked. Update the certificate.
          • The server certificate is untrusted. Add the certificate to the client's trusted store.
          • Timeout trying to perform the operation.
    • OPC XML-DA Client
      • Overview
      • Project Architecture
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — OPC Server
        • Channel Properties — HTTP Proxy
        • Channel Properties — HTTP Authentication
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Exception Mode Options
        • Device Properties — Communications Parameters
        • Device Properties — Import
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Access is denied for item <address>
        • An invalid subscription handle was passed to the server on <channel/device name>
        • Invalid continuation point
        • Invalid filter
        • Invalid hold time for item <address>
        • Invalid item name for item <address>
        • Invalid path for item <address> with path <path>
        • Item <address> is Write Only
        • General SOAP fault on <channel/device name>
        • Server is busy on <channel/device>
        • Server is in an abnormal state on <channel/device name>
        • SOAP data queue overflow
        • SOAP HTTP communication error on <channel/device name>
        • SOAP SSL authentication error on <channel/device name>
        • SOAP TCP communication error on <channel/device name>
        • SOAP XML parse error on <channel/device name>
        • The data type cannot be accepted for item <address>
        • The item name <Channel>.<Device>.<Item Path>.<Item Name> is no longer available in the server address space
        • The item path <Channel>.<Device>.<Item Path> is no longer available in the server address space
        • The Property ID is invalid for the item <address>
        • The server reported an unspecified failure on <channel/device>
        • The server reported that the operation timed out on <channel/device name>
        • The server returned a "Not Supported" error on item <address>
        • The server returned an "Out of memory" error on <channel/device name>
        • The specified write value for <address> is out of range
        • Unknown data type for tag <item> on device <device>. Using Default
      • Best Practices
        • Time-Sensitive Data Acquisition
    • Optimation OptiLogic
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
      • Optimizing Optimation OptiLogic Communications
      • Data Types Description
      • Address Descriptions
        • Digital I/O Bit Mapping
        • Module By Classification
        • Digital Input Modules
          • 4 Digital Input Module
          • 8 Digital Input Module
          • 16 Digital Input Module
          • 24 Digital Input Module
          • 32 Digital Input Module
        • Digital Output Modules
          • 4 Digital Output Module
          • 8 Digital Output Module
          • 16 Digital Output Module
          • 24 Digital Output Module
          • 32 Digital Output Module
        • Analog Input Modules
          • 2-Channel Analog Input Module
          • 4-Channel Analog Input Module
          • 8 Channel Analog Input Module
          • 16-Channel Analog Input Module
        • Analog Output Modules
          • 2-Channel Analog Output Module
          • 4-Channel Analog Output Module
          • 8 Channel Analog Output Module
          • 16-Channel Analog Output Module
        • Specialty Modules
          • High-Speed Counter Module
          • 2-Channel High-Speed Counter Module
          • Base RS232 Port
          • Dual RS232 Port Module
        • Operator Panels
          • OL3406 Operator Panel
          • OL3420 Operator Panel
          • OL3440 Operator Panel
          • OL3850 Operator Panel
        • Module By SubType
          • 4 Digital Output Module
          • 8 Digital Output Module
          • 8 Digital Output Module
          • 8 Digital Output Module
          • 8 Digital Input Module
          • 4 Digital Input Module
          • 8 Digital Input Module
          • 8 Digital Input Module
          • 2-Channel High-Speed Counter Module
          • High-Speed Counter Module
          • 4-Channel Analog Output Module
          • 8 Channel Analog Input Module
          • 8 Channel Analog Input Module
          • Dual RS232 Port Module
          • OL3406 Operator Panel
          • OL3420 Operator Panel
          • OL3440 Operator Panel
          • OL3850 Operator Panel
          • Base RS232 Port
      • Error Descriptions
        • OptiLogic Device Error Codes
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the OptiLogic device driver
          • Memory allocation error
        • Driver Warning Messages
          • Device '<device name>' is not responding
          • Device address <address> contains a syntax error
          • Address <address> is out of range for the specified device or register
          • Device address <address> is not supported by model <model name>
          • Device address <address> is Read Only
          • Array size is out of range for address <address>
          • Array support is not available for the specified address: <address>
          • Data type <type> is not valid for device address <address>
          • Base with type <type> Major ver. <major> Minor ver. <minor> is currently not supported. Contact technical support
          • Module in slot <slot> with type <type> subtype <subtype> is currently not supported. Contact Technical Support
          • Panel with type <type> subtype <subtype> is currently not supported. Contact Technical Support
        • Read Errors
          • Frame received from device <device name> contains errors
          • Base module referenced in address <address> on device <device name> does not exist
          • Slot module referenced in address <address> on device <device name> does not exist
          • Panel module referenced in address <address> on device <device name> does not exist
          • Address <address> contains an invalid address type for RTU module, device <device name>
          • Address <address> contains an invalid address type for module <subtype>, slot <slot>, device <device name>
          • Address <address> contains an invalid address type for panel module <subtype>, device <device name>
          • Address <address> is out of range for module <subtype> in slot <slot>, device <device name>
          • Address <address> is out of range for panel module <subtype>, device <device name>
          • Port <port> of the base module returned an error with value=<error value>
          • Module <subtype> in slot <slot> returned an error with value =<error value>
          • Port <port> of module <subtype> in slot <slot> returned an error with value=<error value>
          • Panel module <subtype> returned an error with value=<error value>
        • Write Errors
          • Unable to write to <address> on device <device name>
          • Write failed. Frame received from device <device name> contains errors
          • Write rejected. Base module referenced in address <address> on device <device name> does not exist
          • Write rejected. Slot module referenced in address <address> on device <device name> does not exist
          • Write rejected. Panel module referenced in address <address> on device <device name> does not exist
          • Write rejected. Address <address> contains an invalid address type for RTU module, device <device name>
          • Write rejected. Address <address> contains an invalid address type for module <subtype>, slot <slot>, device name
          • Write rejected. Address <address> contains an invalid address type for panel module <subtype>, device <device name>
          • Write rejected. Address <address> is out of range for module <subtype> in slot <slot>, device <device name>
          • Write rejected. Address <address> is out of range for panel module <subtype>, device <device name>
          • Write failed. Port <port> of the base module returned an error with value=<error value>
          • Write failed. Module <subtype> in slot <slot> returned an error with value=<error value>
          • Write failed. Port <port> of module <subtype> in slot <slot> returned an error with value=<error value>
          • Write failed. Panel module <subtype> returned an error with value=<error value>
    • Opto 22 Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communications Parameters
        • Device Properties — Import
      • Data Types Description
      • Address Descriptions
      • Automatic Tag Database Generation
      • Optimizing Opto 22 Ethernet Communications
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Array support is not available for the specified address: '<address>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Device Status Messages
          • Device '<channel.device>' not responding to requests on I/O Unit (MMIO) port
          • Device '<channel.device>' not responding to requests on Control Engine (CONT) port
          • Unable to write to '<address>' on device '<device>'
        • Device Specific Messages
          • Winsock initialization failed (OS Error = <n>)
          • Winsock V1.1 or higher must be installed to use the Opto 22 Ethernet device driver
          • Unable to bind to adapter: '<adapter name>'. Connect failed
          • Powerup clear failed for device'<device name>'. <Protocol> response code: <n>
          • Write failed for tag '<tag name>' on device '<device name>'. <Protocol> response code: <n>
          • Read failed for tag '<tag name>' on device '<device name>'. <Protocol> response code: <n>
          • Block read failed for <n> bytes starting at <memory map offset> on device '<device name>'. <Protocol> response code: <n>
          • Read failed for tag '<tag name>' on device '<device name>'. Object appears to be invalid in current strategy
          • Read failed for tag '<tag name>' on device '<device name>'. Unexpected CONT data format
          • Read request failed for multiple tags on device '<device name>'. CONT response code: <n>
        • Import Error Messages
          • Did not import one or more items with incompatible protocol or IP
          • No compatible items found in import file
          • Did not import item '<address>' at record <record> - arrays not supported for specified address
          • Did not import item '<address>' at record <record> - Read and Clear tags must be manually created
          • Error parsing import file record number n, field f
          • Did not import item '<address>' at record <record> - unsupported array size
        • Response Codes
          • MMIO Response Codes
          • CONT Response Codes
    • Partlow ASCII
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>.'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>.'
        • Device Specific Messages
          • Read request rejected for Tag '<tag address>' on device '<device name'>. Deactivating Tag
          • Write request rejected for tag '<tag address>' on device '<device name>'
    • Philips P8/PC20
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
      • Data Types Description
      • Address Descriptions
        • PC20 Addressing
        • P8 Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
    • Ping
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
      • Channel Setup
        • Device Discovery Procedure
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Device <address> is not responding
        • Device Discovery has exceeded <max devices> maximum allowed devices
        • The Device ID for <address> could not be resolved
        • Required functionality of icmp.dll is not found
        • Unable to bind to adapter: <adapter>. Connect failed
        • Unable to generate a tag database for device <device name>. Reason: Could not generate tags due to low system resources
        • Unable to load required file <file>. This driver will not be operational
        • Winsock initialization failed (OS Error = <error>)
        • Winsock shut down failed (OS Error = <error>)
        • Winsock V1.1 or higher must be installed to use the Ping Driver
  • S Drivers
    • SattBus Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Communication Properties
          • Changing the Local Port Number and Network Adapter Properties
        • Device Properties — Settings
          • Bit Ordering for Memory Cells
      • Data Types Description
      • Address Descriptions
        • Overlapped vs. None-Overlapped Addressing
      • Error Descriptions
        • Address Validation
          • Address is out of range for the specified device or register.
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is not supported by model '<model name>'
          • Device address '<address>' is Read Only
          • Missing address
        • Device Status Error Messages
          • Device '<device name>' is not responding
          • Unable to bind to adapter: '<adapter name>' for device '<device name>'. Connection failed
          • Unable to write to '<address>' on device '<device name>'
    • Scanivalve Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — TCP/IP
      • Optimizing Scanivalve Ethernet Communications
      • Data Types Description
      • Address Descriptions
        • DSA 3200 Addressing
        • DTS 3250 Addressing
      • Error Descriptions
        • Missing address
        • Device address <address> contains a syntax error
        • Address <address> is out of range for the specified device or register
        • Device address <address> is not supported by model <model name>
        • Data Type <type> is not valid for device address <address>
        • Device address <address> is Read Only
        • Device <device name> is not responding
        • Failure to initiate 'winsock.dll'
        • Device <device name> received bad response on tag <address>
    • Siemens S5
      • Overview
      • Setup
        • Channel Properties — General
          • Channel Properties — Serial Communications
          • Channel Properties — Write Optimizations
          • Channel Properties — Advanced
          • Channel Properties — Communication Serialization
        • Device Properties — General
          • Device Properties — Scan Mode
          • Device Properties — Timing
          • Device Properties — Auto-Demotion
      • Data Types Description
      • Address Descriptions
        • Siemens S5 (AS511) 90U Address Descriptions
        • Siemens S5 (AS511) 95U Address Descriptions
        • Siemens S5 (AS511) 100U - 100 Address Descriptions
        • Siemens S5 (AS511) 100U - 101 Address Descriptions
        • Siemens S5 (AS511) 100U - 103 Address Descriptions
        • Siemens S5 (AS511) 101U Address Descriptions
        • Siemens S5 (AS511) 115U - 941 Address Descriptions
        • Siemens S5 (AS511) 115U - 942 Address Descriptions
        • Siemens S5 (AS511) 115U - 943 Address Descriptions
        • Siemens S5 (AS511) 115U - 944 Address Descriptions
        • Siemens S5 (AS511) 115U - 945 Address Descriptions
        • Siemens S5 (AS511) 135U - 921 Address Descriptions
        • Siemens S5 (AS511) 135U - 922 Address Descriptions
        • Siemens S5 (AS511) 135U - 928 Address Descriptions
        • Siemens S5 (AS511) 155U - 946 Address Descriptions
        • Siemens S5 (AS511) 155U - 947 Address Descriptions
      • Event Log Messages
        • Error Mask Definitions
    • Siemens S7 MPI
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — S7 MPI Settings
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
      • Data Types Description
      • Address Descriptions
      • Event Log Messages
      • Error Mask Definitions
    • Siemens S7 Plus Ethernet
      • Overview
      • Setup
        • Channel Properties — General
          • Diagnostics Note
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
          • Tag Generation Notes
        • Device Properties — Communications
        • Siemens and Media-Level Redundancy Support
      • Optimizing Communications
      • Data Types Description
        • Data Type Mapping
      • Address Descriptions
      • Event Log Messages
        • Event Log Messages
        • Error Reason Explanations
      • Appendix — Reloading Tags
    • Siemens S7 Plus Ethernet for Edge
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device ID Note
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
          • Tag Generation Notes
        • Device Properties — Communications
        • Siemens and Media-Level Redundancy Support
      • Optimizing Communications
      • Data Types Description
        • Data Type Mapping
      • Address Descriptions
      • Event Log Messages
        • Event Log Messages
        • Error Reason Explanations
      • Appendix — Reloading Tags
    • Siemens S7-200
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Channel Properties — Siemens Client ID
        • Device Properties — Identification
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
      • Data Types Description
      • Address Descriptions
        • S7-200 Addressing
        • S7-200 PPM Addressing
      • Event Log Messages
        • Event Log Messages
        • Error Mask Definitions
    • Siemens S5 3964R
      • Overview
      • Setup
      • Data Types Description
      • Address Descriptions
      • Event Log Messages
        • Event Log Messages
        • Error Mask Definitions
    • Siemens TCP/IP Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Operating Mode
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communications Parameters
        • Device Properties — S7 200
        • Device Properties — Addressing Options
        • Device Properties — Tag Import
        • Siemens TCP/IP Ethernet Device Setup with API Commands
          • Enumerations
            • Device Model Enumerations
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • S7-200 Address Descriptions
        • S7-300 Address Descriptions
        • S7-400 Address Descriptions
        • S7-1200 Address Descriptions
        • S7-1500 Address Descriptions
        • NetLink: S7-300 Address Descriptions
        • NetLink: S7-400 Address Descriptions
        • Internal Tags
        • Item Syntax
          • Standard S7-300/400/1200/1500 Item Syntax
          • Legacy S7-300/400 Item Syntax
      • Event Log Messages
        • Event Log Messages
        • Error Codes
      • Appendix — Channel Properties
      • Appendix — Device Properties
      • Appendix — Tag Properties
      • Configuring Siemens Connections
        • How To Configure S7-200 Connections in Micro/WIN
        • How To Configure S7-300/400 Connections in STEP 7
        • How To Configure S7-1200 Connections with the Totally Integrated Automation (TIA) Portal
        • How To Configure S7-1500 Connections
      • Appendix: Alternate Syntax Support
        • Applicom Direct-Link Item Syntax
        • INAT OPC Server TCPIPH1 Item Syntax
        • Siemens Simatic Net Item Syntax
        • Siemens STEP 7 Item Syntax
        • Softing S7/S5 OPC Server Item Syntax
    • Siemens TCP/IP Ethernet for Edge
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Operating Mode
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communications Parameters
        • Device Properties — S7 200
        • Device Properties — Addressing Options
        • Device Properties — Tag Import
        • Siemens TCP/IP Ethernet Device Setup with API Commands
          • Enumerations
            • Device Model Enumerations
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • S7-200 Address Descriptions
        • S7-300 Address Descriptions
        • S7-400 Address Descriptions
        • S7-1200 Address Descriptions
        • S7-1500 Address Descriptions
        • NetLink: S7-300 Address Descriptions
        • NetLink: S7-400 Address Descriptions
        • Internal Tags
        • Item Syntax
          • Standard S7-300/400/1200/1500 Item Syntax
          • Legacy S7-300/400 Item Syntax
      • Event Log Messages
        • Event Log Messages
        • Error Codes
      • Appendix — Channel Properties
      • Appendix — Device Properties
      • Appendix — Tag Properties
    • Siemens TCP/IP Server Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communications Properties
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — CPU Settings
        • Siemens Client Device Configuration
      • Internal Tags
      • Data Types Description
      • Address Descriptions
      • Event Log Messages
        • Event Log Messages
      • Configuring Connections Using the SIMATIC Manager
        • Step 1: Creating a New Project
        • Step 2: Configuring the Siemens Client and PC Station
        • Step 3: Connecting the Siemens Client and the Siemens Server Driver
        • Step 4: Inserting Function Blocks
        • Step 5: Creating the DB3 Data Block
        • Step 6: Inserting PUT FB
        • Step 7: Downloading to the PLC
    • Simatic / TI 505 Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — 505 Protocol
        • Device Properties — Addressing Options
        • Device Properties — Communications Parameters
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • Addressing
        • Common Data Type Addressing
        • Status Words
        • Alarm Addressing
          • AVF Bit Definitions
          • ACF Bit Definitions
        • Loop Addressing
          • LVF Bit Definitions
          • LCF Bit Definitions
          • LRSF Bit Definitions
        • Find Forced Addressing
      • Error Descriptions
        • Address <address> is out of range for the specified device or register.
        • Array size is out of range for address <address>.
        • Array support is not available for the specified address: <address>.
        • Data type <type> is not valid for device address <address>.
        • Device address <address> contains a syntax error.
        • Device address <address> is read only.
        • Device <device name> cannot execute a read request (<address>, <size>).
        • Device <device name> cannot execute a write request (<address>, <size>).
        • Device <device name> detected a NITP Protocol error (tag <address>, size <size>).
        • Device <device name> detected a Task Code error <error> (tag <address>, size <size>).
        • Device <device name> input queue is full. The module is receiving requests faster than it can process requests.
        • Device <device name> is not responding.
        • Device <device name> responded with Extended error <error> (tag <address>, size <size>).
        • Device <device name>, write value not in range 1-->65536. (Tag 'FFSTART').
        • Missing address.
        • Unable to write to <address> on device <device name>.
        • Winsock initialization failed (OS Error = n).
        • Winsock V1.1 or higher must be installed to use the Simatic/TI 505 Ethernet device driver.
      • Task Error Codes
    • Simatic / TI 505 Serial
      • Overview
      • Setup
      • Data Types Description
      • Address Descriptions
        • NITP Addressing
        • Transparent Byte Addressing
        • Status Words
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Serial Communications
          • COMn does not exist
          • Error opening COMn.
          • COMn is in use by another application
          • Unable to set comm properties on COMn
          • Error Codes
        • Communications error on '<channel name>' [<error mask>]
      • Device Status Messages
        • Device '<device name>' is not responding
        • Unable to write to '<address>' on device '<device name>'
      • Simatic/TI 505 Serial Device Specific Messages
        • Unable to write tag <address> for device <device name>: Error code <code>
        • Unable to read block starting at <address> for device <device name>: Error code <code>
        • Bad address in block [<start address> to <end address>] on device '<device name>'
    • Simulator
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Persistence
        • Configuration API Service — Channel Properties
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
        • Configuration API Service — Device Properties
      • Data Types Description
      • Address Descriptions
        • 8-Bit Device Addresses
        • 16-Bit Device Addresses
        • Simulation Functions
          • Ramp Function
          • Random Function
          • Sine Function
          • User Function
      • Event Log Messages
        • Event Log Messages
    • SIXNET EtherTRAK
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — TCP/IP
        • Device Properties — Blocks
      • Addressing RemoteTRAK Devices Over the Ethernet
      • Optimizing Your SIXNET EtherTRAK Communications
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is read only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the SIXNET EtherTRAK device driver
        • Device Specific Messages
          • Bad address in block [<start address> to <end address>] on device '<device name>'
          • Block size mismatch reading [<start address> to <end address>] on device '<device name>
          • Block request [<start address> to <end address>] on device '<device name>.' responded with exception = n
    • SIXNET UDR
      • Overview
      • External Dependencies
      • Setup
        • SIXNET Software Components: Universal Driver Components
        • Networks
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communications
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Tag Generation
        • Device Properties — Station
        • Device Properties — Settings
        • Device Properties — Block Sizes
        • Device Properties — Tag Import
        • UDR Server Devices
      • Data Types Description
      • Address Descriptions
        • Client Open Model Addressing
        • Server Model Addressing
      • Optimizing Ethernet Communications
      • Automatic Tag Database Generation
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register.
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Driver Error Messages
          • Could not allocate memory for UDR server device '<device name>'
          • Failed to create SIXNET interface for UDR client devices on channel '<channel>'
          • Failed to create SIXNET interface for UDR server device '<station number>' on channel
          • Failed to open session for devices on channel '<channel>'
          • Failed to open session for UDR server device '<station number>' on channel '<channel>'
          • Failed to build request for device '<station number>' on channel '<channel>'
          • Failed to send request for device '<station number>' on channel '<channel>'
          • Failed to build ACK for device '<station number>' on channel '<channel>'
          • Failed to send ACK for device '<station number>' on channel '<channel>'
          • Failed to build NAK for device '<station number>' on channel '<channel>'
          • Failed to send NAK for device '<station number>' on channel '<channel>'
        • Automatic Tag Database Generation Messages
          • Tag import failed due to low memory resources
          • File exception encountered during tag import
          • Imported tag name changed from '<old name>' to '<new name>' (record: <record>)
          • Tag '<name>' (record: <record>) could not be imported due to name conflict
          • Tag not imported due to unknown I/O type (record: <record>)
          • Tag could not be imported due to unsupported datatype (record: <record>)
    • SNMP
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Device Discovery Procedure
          • Discovery Settings
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communications
        • Device Properties — v3 Security
        • Device Properties — MIB Import
        • Device Properties — Trap / Inform Notifications
        • Device Properties — Network Analyst
      • Data Types Description
      • Historical Data Attributes
        • Previous Value
        • Delta Time
        • Moving Average
      • Address Descriptions
        • About SNMP Addresses
        • About MIB Modules
        • About Network Analyst Tags
        • Trap Tags
      • SNMP Trap Messages
        • Trap Events Queue
        • Auto Created Trap Tags
      • Message Descriptions
        • Address Validation
          • Address <address> is out of range for the specified device or register.
          • Data Type <type> is not valid for device address<address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is read only.
          • The remote device reports that the requested name <OID> does not exist on <device name>.
        • Runtime Messages
          • <Channel name>.<device name>: unable to open a SNMP session to host <host> on port <port>, using protocol <protocol>.
          • <Channel name>.<device name>: Unable to establish a trap listener on port <port>, using protocol <protocol>.No trap events will be received.
          • Access to address <address> on <channel name>.<device name> is not permitted.
          • Address <address> on <channel name>.<devicename> is not writable.
          • Address <address> on <channel name>.<device name> is unavailable.
          • Device <device name> does not support the necessary information required to perform network analysis. Network Analyst tags will be disabled for this device.
          • Device <device name> does not support the number of ports currently configured in this application. Network Analyst tags will be disabled for this device.
          • Device <device name> is not responding.
          • Device Discovery has exceeded <max devices> maximum allowed devices.
          • High-capacity counters for network analysis are not available for device <device name>. Attempting to use low capacity counters.
          • The remote device reports that the requested name <name>does not exist on <channel name>.<device name>.
          • The response message for the current transaction on <channel name>.<device name> would have been too large, and hasbeen discarded by the remote device.
          • Unable to bind trap socket on binding address <address>, port <port>, and protocol <protocol> for device <device>.
          • Unable to bind trap socket on binding address <IP address>, port <port number> and protocol <protocol> for device <device name>.
          • Unable to create communications thread on trap socket for binding address <IP address>, port <port number>, and protocol <protocol> for device <device name>.
          • Unable to create listener on trap socket for binding address <IP address>, port <port number> and protocol <protocol> for device <device name>.
          • Unable to create trap socket on binding address <IP address>, port <port number> and protocol <protocol> for device <device name>.
          • Unable to load authentication and privacy passphrases for device <device name>. Please specify an authentication and privacy passphrase in the SNMP v3 Security property group of Device Properties.
          • Unable to load authentication passphrase for device <device name>. Please specify an authentication passphrase in the SNMP v3 Security property group of Device Properties.
          • Unable to load username for device <device name>. Please specify a username in the SNMP v3 Security property group of Device Properties.
          • Unable to resolve host address <IP address> on device <device name> for trap processing.
          • Unable to send transaction: <reason>.
        • SNMP Agent Error Messages
          • Data for address <address> on <channel name>.<device name> has an inconsistent value.
          • Data for address <address>on <channel name>.<device name> has the wrong encoding.
          • Data for address <address> on <channel name>.<device name> has the wrong length.
          • Data for address <address>on <channel name>.<device name> has the wrong value.
        • XML Messages
          • Invalid XML document [Reason: The excluded port list is invalid for device <device name>].
          • Invalid XML document [Reason: Port Status 0 limit must be less than port Status 1 limit for device <device name>].
        • Communications Messages
          • Unable to bind to adapter: <adapter address>. Connect failed. Winsock Err # n.
          • Winsock initialization failed (OS Error = n).
          • Winsock shut down failed (OS Error = n).
          • Winsock V1.1 or higher must be installed to use the SNMP device driver.
        • Authentication Messages
          • The authentication passphrase fields do not match. Please retype the passphrase identically in both fields.
          • The privacy passphrase fields do not match. Please retype the passphrase identically in both fields.
        • MIB Parser Messages
          • Cannot redefine macro name.
          • Cannot redefine primitive type.
          • Close IMPORTS statement with a ';'.
          • Could not add object: <object name>; parent object: <parent object name> undefined.
          • Could not find module: <module name> to import.
          • Could not obtain MIB module information.
          • DEFINITIONS must directly follow MIB module name.
          • End one module definition before beginning another.
          • Failed to open file: <file path>.
          • Invalid assignment valu.e
          • Invalid DESCRIPTION value.
          • Invalid ENTERPRISE value.
          • Invalid MAX-ACCESS value.
          • Invalid module name.
          • Invalid NOTIFICATION-TYPE clause.
          • Invalid object assignment.
          • Invalid OBJECT-IDENTITY clause.
          • Invalid OBJECT-TYPE clause.
          • Invalid OBJECTS value.
          • Invalid octet or bit string.
          • Invalid parent object name.
          • Invalid STATUS value.
          • Invalid SYNTAX value.
          • Invalid TRAP-TYPE assignment.
          • Invalid TRAP-TYPE clause.
          • Open bracket not closed.
          • Open parenthesis not closed.
          • Sub-identifier out of range: 0 to 4294967295.
          • Syntax Error.
          • Undefined identifier: <identifier name>.
        • Security Related Messages
          • <channel name>.<device name> reports a decryption error. Check the privacy passphrase.
          • <channel name>.<device name> reports the authentication digest is incorrect. Check the authentication passphrase.
          • <Channel name>.<device name> reports the request was not within the time window.
          • <channel name>.<device name> reports the specified security level is not supported
          • <channel name>.<device name> reports the specified user is unknown.
          • <channel name>.<device name> responded to a request with a Report-PDU containing no valid data.
    • Square D
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Settings
        • Route ID
      • Data Types Description
      • Address Descriptions
        • SYMAX Addressing
        • Square D Serial Power Logic Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Bad address in block [<start address> to <end address>] on device '<device name>'
          • The Square D Serial device appears to be sending unsolicited messages
    • System Monitor
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Import
          • Tag Descriptions
        • Device Properties — Settings
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Counter <counter> contains invalid data
        • Counter <counter> has a negative denominator
        • Counter <counter> has a negative time base
        • Counter <counter> has a negative value
        • Counter <counter> is not valid
        • Counter <counter> was not found
        • Devices of model type N/A cannot be multidropped
        • Failed to retrieve instances for object
        • Instance <instance> was not found
        • Performance <object> was not found
  • T-W Drivers
    • Thermo Westronics Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — TCP/IP
        • Device Properties — Block Sizes
        • Device Properties — Settings
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • SV100 Addressing
        • SV180 Addressing
        • SV180 (2.0) Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address <address> contains a syntax error
          • Address <address> is out of range for the specified device or register
          • Device address <address> is not supported by model <model name>
          • Data Type <type> is not valid for device address <address>
          • Device address <address> is Read Only
          • Array size is out of range for address <address>
          • Array support is not available for the specified address: <address>
        • Device Status Messages
          • Device <device name> is not responding
          • Unable to write to <address> on device <device name>
        • Thermo Westronics Ethernet Device Specific Messages
          • Failure to initiate 'winsock.dll'
          • Bad address in block [<start address> to <end address>] on device <device name>
    • Thermo Westronics Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Block Sizes
        • Device Properties — Settings
      • Data Types Description
      • Address Descriptions
        • Series 1200 Addressing
        • Series 1600 Addressing
        • Series 3000 Addressing
        • SM100 Addressing
        • SV100 Addressing
        • SV180 Addressing
        • SV180 (2.0) Addressing
      • Error Descriptions
        • Address Validation
          • Address <address> is out of range for the specified device or register
          • Array size is out of range for address <address>
          • Array support is not available for the specified address: <address>
          • Data type <type> is not valid for device address <address>
          • Device address <address> contains a syntax error
          • Device address <address> is not supported by model <model name>
          • Device address <address> is read only
          • Missing address
        • Serial Communications
          • Communications error on <channel name> [<error mask>]
          • COMn does not exist
          • COMn is in use by another application
          • Error opening COMn
          • Unable to set comm properties on COMn
        • Device Status Messages
          • Device <device name> is not responding
          • Unable to write to <address> on device <device name>
        • Thermo Westronics Serial Device Specific Messages
          • Bad address in block [<start address> to <end address>] on device <device name>
          • Bad array spanning [<address> to <address>] on device <device name>
          • Failed to read SM100 decimal placement data
    • TIWAY Host Adapter
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Adapter
        • Channel Properties — Network Manager
        • Channel Properties — Channel A/B
        • Channel Properties — HIU (Host Interface Unit)
        • Channel Properties — Macro Setup
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Addressing Options
      • Data Types Description
      • Address Descriptions
        • Standard Data Type Addressing
          • Standard Data Type Addressing
          • SS Bit Definitions
        • Alarm Addressing
          • Alarm Addressing
          • AVF Bit Definitions
          • ACF Bit Definitions
        • Loop Addressing
          • Loop Addressing
          • Loop V-Flag Bit Definitions
          • LCF Bit Definitions
          • LRSF Bit Definitions
        • UHA Status & Control Addressing
          • UHA Status & Control Addressing
        • Macro Addressing
          • Macro Addressing
          • UNILINK Macros
          • Channel Properties — Macro Setup
          • Defining Read Macros
          • Defining Link Macros
          • Macro Enable/Disable Status
          • Macro Response Status Word (MRSW)
      • Error Descriptions
        • Address Validation
          • Address <address> is out of range for the specified device or register
          • Array size is out of range for address <address>
          • Array support is not available for the specified address: <address>
          • Data Type <type> is not valid for device address <address>
          • Device address <address> contains a syntax error
          • Device address <address> is read only
          • Missing address
        • Serial Communications
          • Communications error on <channel name> [<error mask>]
          • COMn does not exist
          • COMn is in use by another application
          • Error opening COMn
          • Unable to set comm properties on COMn
        • Device Status Messages
          • Device <device name> is not responding
        • Device Specific Messages
          • Adapter reporting command timeout - Error 0x001. Reconfiguring adapter
          • Adapter reporting HIU not initialized - Error 0x100B. Reconfiguring adapter
          • Adapter reporting unrecognized command - Error 0x0084. Reconfiguring adapter
          • Host adapter not responding
          • Secondary device <device name> no longer connected to network. Reconnecting secondary
        • Read Errors
          • Unable to read block starting at <address> on device <device name>: Adapter Error <code>
          • Unable to read block starting at <address> on device <device name>: Adapter Error <code>. Block deactivated
          • Unable to read block starting at <address> on device <device name>: Framing Error
          • Unable to read block starting at <address> on device <device name>: Secondary Error: <code>
          • Unable to read block starting at <address> on device <device name>: Secondary Error: <code>. Block deactivated
          • Unable to read tag <address> on device <device name>: Task Error: <code>
          • Unable to read tag <address> on device <device name>: Task Error: <code>. Tag deactivated
        • Write Errors
          • Unable to write to <address> on device <device name>.'
          • Unable to write tag <address> on device <device name>: Adapter Error <code>
          • Unable to write tag <address> on device <device name>: Framing Error
          • Unable to write tag <address> on device <device name>: Secondary Error: <code>
          • Unable to write tag <address> on device <device name>: Task Error: <code>
        • Macro Specific Messages
          • Adapter reporting macro link error - Error 0x2020. Trigger macro cannot be configured for auto-enable
          • Macro tag address <address> is invalid given new macro definition. Tag deactivated
          • The macro referenced in tag address <address> is no longer available. Tag deactivated
          • Unable to read macro with source ID <ID>, macro #<num> on <device name>: Adapter Error <code>
          • Unable to read macro with source id <ID>, macro #<num> on <device name>: Adapter Error <code>. Block deactivated
          • Unable to read macro with source id <ID>, macro #<num> on <device name>: Framing Error
          • Unable to read macro with source id <ID>, macro #<num> on <device name>: MRSW Error <code>
          • Unable to read macro with source id <ID>, macro #<num> on <device name>: MRSW Error <code>. Block deactivated
          • Unable to read macro with source id <ID>, macro #<num> on <device name>: Secondary Error <code>
          • Unable to read macro with source id <ID>, macro #<num> on <device name>: Secondary Error <code>. Block deactivated
          • Unable to read macro with source id <ID>, macro #<num> on <device name>: Task Error <code>
          • Unable to read macro with source id <ID>, macro #<num> on <device name>: Task Error <code>. Tag deactivated
        • XML Error Messages
          • XML Loading Error: An existing link macro already has this macro number: <num>. Link macro not loaded
          • XML Loading Error: An existing read macro already has this macro number: <num>. Link macro not loaded
          • XML Loading Error: An existing read macro already has this macro number: <num>. Read macro not loaded
          • XML Loading Error: Invalid value found. Link macro not loaded
          • XML Loading Error: Invalid value found. Read macro not loaded
          • XML Loading Error: Link macro linked to missing read macro <num>. Link macro not loaded
          • XML Loading Error: Read macro(s) missing from file. Link macro(s) not loaded
      • Error Codes
        • Adapter Error Codes
        • Secondary Error Codes
        • Task Error Codes
        • MRSW Termination Codes
    • Torque Tool Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Communications Parameters
        • Device Properties — Settings
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • Message IDs
        • Command Sets
          • Command Set: Alarm
          • Command Set: Auto-Disable Settings
          • Command Set: Communication
          • Command Set: Dynamic Job Request
          • Command Set: Flash
          • Command Set: Identifiers
          • Command Set: IO Interface
          • Command Set: Job Info
          • Command Set: Job Data
          • Command Set: Job Number Data
          • Command Set: Last Tightening Results
          • Command Set: Multi Spindle Results
          • Command Set: Old Tightening Results
          • Command Set: Operation Result
          • Command Set: Parameter Set Data
          • Command Set: Parameter Set Numbers
          • Command Set: Parameter Set Selected
          • Command Set: Program Messages
          • Command Set: Selector Messages
          • Command Set: Time
          • Command Set: Tool Data
          • Command Set: Trace Curve Data Messages
          • Command Set: User Data Messages
          • Command Set: VIN
      • Event Log Messages
        • Error Descriptions
        • Address Validation Errors
          • Address <address> is out of range for the specified device or register.
          • Array size is out of range for address <address>.
          • Array support is not available for the specified address: <address>.
          • Data type <type> is not valid for device address <address>.
          • Device address <address> contains a syntax error.
          • Device address <address> is read only.
          • Subscription failed for device
        • Ethernet Errors
          • Unable to bind to adapter: <adapter name>. Connect failed.
          • Winsock initialization failed (OS error = <error>).
          • Winsock shut down failed (OS Error = <error>).
          • Winsock V1.1 or higher must be installed to use the driver.
        • Runtime Errors
          • Device <device name> failed to connect.
          • Device <device name> is not responding.
          • Unable to read tag <tag name>: Device <device name> encountered a parsing error.
          • Unable to read tag <tag name>: Device <device name> received an error response (Error <error code>).
          • Unable to read unsolicited packed data group: Device '<device>' received an error response (Error <error num>).
          • Unable to write tag <tag name>: Device <device name> encountered a parsing error.
          • Unable to write tag <tag name>: Device <device name> received an error response (Error <error code>).
          • Unable to write tag <tag name>: Device <device name> received invalid data for write.
          • Unable to write to <address> on device <device name>.
        • Error Codes
          • Error Codes
      • Appendix — Dynamic Job Request
      • Appendix — Tightening Program Read/Write
      • Appendix — LTR Revision 998 Tag Behavior
    • Toshiba Serial
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
      • Data Types Description
      • Address Descriptions
        • EX100 Addressing
        • EX200 Addressing
        • EX500 Addressing
        • T1, T1 Super Addressing
        • T2 Addressing
        • T3, T3H Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is not supported by model '<model name>'
          • Device address '<address>' is Read Only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm properties on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name>' not responding
          • Unable to write to address '<address>' on device '<device name>'
    • Toshiba Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Communications Parameters
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • T2 Addressing
        • T3H Addressing
        • S2 Addressing
        • S3 Addressing
      • Error Descriptions
        • Address Validation
          • Address <address> is out of range for the specified device or register
          • Data Type <type> is not valid for device address <address>
          • Device address <address> contains a syntax error
          • Device address <address> is not supported by model <model name>.'
          • Device address <address> is read only
          • Missing address
        • Device Status Messages
          • Deactivating tag block. Bad address in block [<start address> to <end address>] on device <device name>
          • Device <device name> not responding
          • Device <device name> responded with error code 'n' (Tag <tag name>)
          • Unable to write to address <address> on device <device name>
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the Toshiba Ethernet device driver
      • Hardware Configuration
        • S Series Setup
        • T2 and T3 Setup
    • Toyopuc PC3/PC2 Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Communications Parameters
      • Data
        • Diagnostics Tags
        • Multi-Point Read Support
        • Data Types Description
      • Address Descriptions
        • PC2/PC2 Interchange Mode Address Descriptions
        • PC3 Address Descriptions
        • PC10G / Nano 10GX Address Descriptions
      • Event Log Messages
        • Address <address> is out of range for the specified device or register
        • Array size is out of range for address <address>.
        • Array support is not available for the specified address:<address>.
        • Device address <address> contains a syntax error.
        • Data Type <type> is not valid for device address <address>.
        • Device address <address> is read only.
        • Device <device name> is not responding.
        • Missing Address.
        • Read request failed. Device responded with an error. Tag Address = <address>.
        • Read request failed due to a framing error. Tag Address = <address>.
        • Unable to write to <address> on device <device name>.
        • Write request failed due to a framing error. Tag Address = <address>.
        • Write request failed. Device responded with an error. Tag Address = <address>.
        • Error Response Data: Error Code Table
      • Appendix: Configuring Modules
        • Configuring the PC10G-CPU for Ethernet Communications
        • Configuring the FL/ET-T-V2 Ethernet Module
        • Configuration Ladder for EN-I/F Ethernet Module
    • Toyopuc Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
      • Diagnostics Tags
      • Multi-Point Read Support
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm properties on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device-Specific Messages
          • Bad address in block [<start address> to <end address>] on device '<device name>'
    • Triconex Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Network Interface
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — CM Configuration
        • Device Properties — Communications
        • Device Properties — Tag Import
      • Network Redundancy
      • Optimizing Communications
      • Automatic Tag Database Generation
      • Data Types Description
      • Address Descriptions
        • Tricon Addressing
        • Triconex Addressing
        • Trident Addressing
        • Device System Tags
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is not supported by model '<model name>'
          • Device address '<address>' is Read Only
          • Missing address
        • Device Status Messages
          • Could not detect available network adapters for <primary/secondary> network
          • Device '<device name>' is not responding
          • Failed to load Winsock or related library
          • Tag import error - invalid bin in item path: '<item path>'
          • Tag import error - invalid item path format: '<item path>'
          • Tag import error - invalid name: '<tag name>'
          • Tag import error - invalid offset in item path: '<item path>'
          • Tag import failed. Could not find data for node '<node>'
          • Tag import failed. Could not open file '<file>'
          • Tag import failed due to unexpected XML format in '<file>'
          • Tag import failed. No import file name or system tags specified
          • Unable to process data update on device '<device>'. CRC error
          • Unable to process data update on device '<device>'. Unexpected message format
          • Unable to process data update on device '<device>'. Unexpected model
          • Unable to process data update on device '<device>'. Unexpected node number
          • Unable to use network redundancy on channel '<channel>'
          • Unable to use specified primary network adapter '<adapter>' on channel '<channel>'
          • Unable to use specified secondary network adapter '<adapter>' on channel '<channel>'
          • Winsock initialization failed (OS Error = <error code>)
          • Winsock V1.1 or higher must be installed to use the Triconex Ethernet device driver
          • Write failed for tag '<address>' on device '<device>'. CRC error
          • Write failed for tag '<address>' on device '<device>'. No data for Read/Modify/Write
          • Write failed for tag '<address>' on device '<device>'. Timeout
          • Write failed for tag '<address>' on device '<device>'. TSAA Response Code: <code>
          • Write failed for tag '<address>' on device '<device>'. Unexpected model
          • Write failed for tag '<address>' on device '<device>'. Unexpected node number
          • Write failed for tag '<address>' on device '<device>'. Unexpected response format
    • Telemecanique Uni-Telway
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Driver Setup
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Auto-Demotion
        • Device Properties — Address
        • Device Properties — Timeout
      • Data Types Description
      • Address Descriptions
        • Small Frame Addresses
        • Large Frame Addresses
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address <address> contains a syntax error
          • Address <address> is out of range for the specified device or register
          • Data type <type> is not valid for device address <address>
          • Device address <address> is read only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm properties on COMn
          • Communications error on <channel name> [<error mask>]
        • Device Status Messages
          • Device <device name> is not responding
          • Unable to write to <address> on device <device name>
          • Device <device name> responded with error <error byte> (Tag <address>, Size <size>)
          • Device <device name> Negative response returned (Tag <address>, Size <size>)
          • Device <device name> response invalid (Tag <address>, Size <size>)
    • Universal Device
      • Overview
      • Architecture
      • Setup
      • Channel Properties
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Profile
      • Setup
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Communication Transport
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — File Mode
        • Device Properties — User-Defined Settings
      • Data Types Descriptions
      • Event Log Messages
        • Event Log Messages
      • Sample Profiles
    • WAGO Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communications Parameters
        • Device Properties — Block Sizes
        • Device Properties — Slot Configuration
      • Analog Input Modules
      • Analog Output Modules
      • Binary Spacer Module
      • Digital Input Modules
      • Digital Output Modules
      • Encoder and Resolver Modules
      • Generic Module
      • Power Supply and End Modules
      • Special Modules
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • 750-342 Buscoupler
        • 750-842 Programmable Fieldbus Controler (PFC)
        • Process Image
          • Input Coils
          • Output Coils
          • Internal Registers
          • Holding Registers
      • Tag Naming Convention
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address <address> contains a syntax error
          • Address <address> is out of range for the specified device or register
          • Device address <address> is not supported by model <model name>
          • Data Type <type> is not valid for device address <address>
          • Device address <address> is Read Only
          • Array size is out of range for address <address>
          • Array support is not available for the specified address: <address>
        • Device Status Messages
          • Device <device name> is not responding
          • Unable to write to <address> on device <device name>
        • Device Specific Messages
          • Failure to initiate 'winsock.dll'
          • Bad address in block [x to y] on device <device name>
          • Bad received length [x to y] on device <device name>
    • Weatherford 8500
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Communication Serialization
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Communications
      • Data Types Description
      • Address Descriptions
        • Function Items
        • Buffer Items
        • Command Items
        • Well Command Items
        • Dynagraph and Xdynagraph10 Items
        • Surface and Downhole Items
        • Parameter Items
        • Statistics Items
        • WellPilot RPOC Parameter Listings
          • Parameters 1-300
          • Parameters 301-600
          • Parameters 601-900
          • Parameters 901-1199
          • Parameters 1202-1500
          • Parameters 1501-1800
          • Parameters 1801-2100
          • Parameters 2100-2400
          • Parameters 2401-2700
          • Parameters 2701-3000
          • Parameters 3001-3300
          • Parameters 3301-3659
        • WellPilot/ePIC VSD Parameter Listings
          • Parameters 1-300
          • Parameters 309-599
          • Parameters 601-900
          • Parameters 901-1199
          • Parameters 1201-1500
          • Parameters 1501-2524
        • ePIC RPC Parameter Listings
          • Parameters 1-300
          • Parameters 309-599
          • Parameters 601-900
          • Parameters 901-1180
        • M2000 Parameter Listings
          • Parameters 1-300
          • Parameters 309-600
          • Parameters 601-862
        • 8800 Parameter Listings
          • Parameters 1-300
          • Parameters 301-600
          • Parameters 601-862
        • 8750/8650/8500 Parameter Listings
          • Parameters 1-300
          • Parameters 309-600
          • Parameters 601-669
      • Recommended Function, Buffer, and Command Items Usage
      • Error Descriptions
        • Address <address> is out of range for the specified device or register.
        • Address in block [Parameters: <parameter number list>] on device <device name> responded with exception code <code>.
        • Array size is out of range for address <address>.
        • Block address [<start address> to <end address>] on device <device name> responded with exception code <code>.
        • Data type ‘<type>’ is not valid for device address <address>.
        • Device address <address> contains a syntax error.
        • Device <device name> is not responding.
        • Query of parameter 619 setting on device <address> returned unexpected value <value>. Using actual position values.
        • Unable to generate a tag database for device <device name>. Reason: Memory allocation error.
        • Unable to load <dll>.
        • Unable to read from address <address> on device <device name>: Device responded with exception code <code>.
        • Unable to write to address <address> on device <device name>: Device responded with exception code <code>.
      • Error Codes
        • Exception Codes
        • Frame Process Error Codes
    • WITS Level 0 Active
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Request
        • Channel Properties — Timeout
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
        • Device Properties — Settings
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Device '<device name>' item '<WITS ID>', Write value length exceeds maximum frame length. Truncating to 1024 bytes
        • Device '<device name>', Abandoning current message after <time in ms> ms of inactivity
        • Device '<device name>', Invalid delimiter. Expecting '<configured delimiter>'. Discarding remainder of message
        • Device '<device name>', Message parsing error. Discarding remainder of message
        • Device '<device name>', More than 4096 bytes in item '<WITS ID>' data. Discarding remainder of message
        • Device '<device name>', Non-numeric WITS ID found: '<WITS ID>'. Discarding remainder of message
        • Device '<device name>', Non-printable character '<hex byte>' found in WITS ID. Discarding remainder of message
        • Device '<device name>', Non-printable character '<hex byte>' in item '<WITS ID>' data. Discarding remainder of message
        • Device '<device name>', Received Null value '<Null value>' for item '<WITS ID>'. Setting tag to bad quality
        • Device '<device name>', Request has timed out after <time in seconds> seconds of inactivity
        • Device '<device name>', Value '<value>' is invalid for item '<WITS ID>' with data type '<data type>'. Setting tag to bad quality
        • Device '<device name>', Value '<value>' out of range for item '<WITS ID>' with data type '<data type>'. Setting tag to bad quality
    • WITS Level 0 Passive
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Timeout
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Tag Generation
        • Device Properties — Settings
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Device '<device name>' item '<WITS ID>', Write value length exceeds maximum frame length. Truncating to 1024 bytes
        • Device '<device name>', Abandoning current message after <time in ms> ms of inactivity
        • Device '<device name>', Communications have timed out after <time in seconds> seconds of inactivity
        • Device '<device name>', Invalid delimiter. Expecting '<configured delimiter>'. Discarding remainder of message
        • Device '<device name>', Message parsing error. Discarding remainder of message
        • Device '<device name>', More than 4096 bytes in item '<WITS ID>' data. Discarding remainder of message
        • Device '<device name>', Non-numeric WITS ID found: '<WITS ID>'. Discarding remainder of message
        • Device '<device name>', Non-printable character '<hex byte>' found in WITS ID. Discarding remainder of message
        • Device '<device name>', Non-printable character '<hex byte>' in item '<WITS ID>' data. Discarding remainder of message
        • Device '<device name>', Received Null value '<Null value>' for item '<WITS ID>'. Setting tag to bad quality
        • Device '<device name>', Value '<value>' is invalid for item '<WITS ID>' with data type '<data type>'. Setting tag to bad quality
        • Device '<device name>', Value '<value>' out of range for item '<WITS ID>' with data type '<data type>'. Setting tag to bad quality
        • Unable to write to address '<address>' on device '<device name>'. Invalid socket
  • Y Drivers
    • Yaskawa Memobus Plus
      • Overview
      • External Dependencies
      • Setup
        • Channel Properties — General
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Channel Properties — Adapter
        • Device Properties — General
          • Device ID
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Settings
        • Device Properties — Block Sizes
      • Optimizing Your Yaskawa Memobus Plus (SA85) Communications
      • Data Types Description
      • Yaskawa Memobus Plus (SA85) Address Descriptions
        • Output Coils
        • Input Coils
        • Internal Registers
        • Holding Registers
        • Global Data
        • Constant Registers
        • Link Coils
        • Link Registers
        • MC Coils
        • MC Control Coils
        • MC Relays
        • MC Control Relays
        • MC Code Relays
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Device Status Messages
          • Started MBPLUS.SYS device
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Unable to start MBPLUS.SYS device
          • Unable to communicate with MBPLUS.VXD
          • Unable to open MBPLUS server path
          • Error opening MBPLUS path [<ID>]
          • Bad address in block [<start address> to <end address>] on device '<device name>'
    • Yaskawa MP Series Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Communications Parameters
        • Device Properties — Block Sizes
        • Memory Mapping for MPxxxxiec Devices
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions for MPxxxx (218IF Module) Devices
      • Address Descriptions for MPxxxxiec Devices
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is not supported by model '<model name>'
          • Device address '<address>' is Read Only
          • Missing address
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Device '<device name>' block request [<start address> to <end address>] responded with exception '<exception response>'
          • Failure to start Winsock communications
          • Illegal data address for tag '<tag address>' on device '<device name>'
          • Illegal data address in block [<start address> to <end address>] on device '<device name>'
          • Illegal data value for tag '<tag address>' on device '<device name>'
          • Illegal data value in block [<start address> to <end address>] on device '<device name>'
          • Illegal function code '<function code (hex)>' in block [<start address> to <end address>] on device '<device name>'
          • Illegal function code '<hex function code>' for tag '<tag address>' on device '<device name>'
          • Modbus server device '<device name>' detected a memory parity error
          • Modbus server device '<device name>' has failed
          • Modbus server device '<device name>' is busy
          • Tag '<tag address>' on device '<device name>' responded with exception '<exception code>'
          • Unable to bind to adapter: '<adapter>'. Connect failed.
          • Unable to create a socket connection for Device '<device>'
          • Unexpected response frame received for block [<start address> to <end address>] on device '<device name>'
          • Unexpected response frame received for tag '<tag address>' on device '<device name>'
          • Winsock initialization failed (OS Error = <error code>)
          • Winsock shut down failed (OS Error = <error code>)
          • Winsock V1.1 or higher must be installed to use the Yaskawa MP Series Ethernet device driver
      • Hardware Configuration
        • Hardware Configuration for MPxxxx (218IF Module)
        • Hardware Configuration for MPxxxxiec
        • Hardware Configuration MPxxxx (218IF Module) - Ladders
    • Yaskawa MP Series Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Ethernet Encapsulation
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Block Sizes
      • Data Types Description
      • Address Descriptions
        • MP Series Address Descriptions
        • GL Series Address Descriptions
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Device address '<address>' is not supported by model '<model name>'
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
          • Array size is out of range for address '<address>'
          • Array support is not available for the specified address: '<address>'
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
        • Device Specific Messages
          • Device '<device>' responded with error '<Memobus error code>' (Tag '<tag>', Size '<bytes>')
          • Bad received length [<start address> to <end address>] on device '<device>'
          • Bad address in block [<start address> to <end address>] on device '<device>'
          • Device '<device>' block request [<start address> to <end address>] responded with exception <Memobus error code>
    • Yokogawa Controller
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
          • Device Properties for UT37 Series
          • Device Properties for PCLink Series
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
          • Automatic Tag Database Generation
        • Device Properties — Special Data Handling
        • Device Properties — Request Size Settings
        • Device Properties — Checksum Settings
      • Broadcasting
      • Data Types Description
        • Default Data Types for Devices Supporting PCLink Protocol
      • Address Descriptions
        • UT37 Addressing
        • UT38 Addressing
        • UP27 Addressing
        • UT750 Addressing
          • Configuration Parameters Addressing for UT750
          • Control Mode Parameters Addressing for UT750
          • Loop Parameter Addressing for UT750
          • Error Status Addressing for UT750
          • Input Block Addressing for UT750
          • Loop Mode Status Addressing for UT750
          • Linearizer Register Addressing for UT750
          • Control Parametersq for UT750
          • OP Mode Addressing for UT750
          • OP Related Parameter Addressing for UT750
          • Output Block Addressing for UT750
          • PID Parameters Addressing for UT750
          • Process Parameters Addressing for UT750
          • Status Addressing for UT750
          • Absolute Address Mapping (D0000-D0300) for UT750
          • Absolute Address Mapping (D0301 - D0700)
          • Absolute Address Mapping (D0700 - D1100) for UT750
          • Absolute Address Mapping (D1100 - D1300)
          • Absolute Address Mapping (D1301 - D1700)
          • Absolute address Mapping (I0001 - I0701) for UP750
        • UP750 Addressing
          • Configuration Parameters Addressing for UP750
          • Control Mode Addressing for UP750
          • Loop Function Parameter Addressing for UP750
          • Error Status Addressing for UP750
          • Input Block Addressing for UP750
          • Loop Mode Status Addressing for UP750
          • Linearizer Registers Addressing for UP750
          • Control Parameter Addressing for UP750
          • OP Mode Parameter Addressing for UP750
          • OP Related Parameter Addressing for UP750
          • Output Block Addressing for UP750
          • PID Parameters addressing for UP750
          • Status Addressing for UP750
          • Process Parameters Addressing for UP750
          • Absolute Address Mapping (D0001 - D0300) for UP750
          • Absolute Address Mapping (D0301 - D0700) for UP750
          • Absolute Address Mapping (D0701 - D1100) for UP750
          • Absolute Address Mapping (D1101 - D1300) for UP750
          • Absolute Address Mapping (D1301 - D1710) for UP750
          • Absolute Address Mapping (I0001 - I0714) for UP750
        • UT350/UT320 Addressing
          • PID Parameter Addressing for UT350 / UT320
          • Status Addressing for UT350 / UT320
          • Communication Parameter Addressing for UT350 / UT320
          • Control Output Parameters Addressing for UT350
          • OP Mode Parameter Addressing for UT350 / UT320
          • OP Related Parameter Addressing for UT350 / UT320
          • PV Input Parameters Addressing for UT350 / UT320
          • Process Parameters addressing for UT350 / UT320
          • Setup Parameters Addressing for UT350 / UT320
          • Absolute Address Mapping (D0001 - D0301) for UT350 / UT320
          • Absolute Address Mapping (D0301 - D1253) for UT350 / UT320
          • Absolute Address Mapping (I0001-I0486) for UT350 / UT320
        • US1000 Addressing
          • Configuration Parameters Addressing for US1000
          • Control Mode Parameter Addressing for US1000
          • OP Related Parameters Addressing for US1000
          • PID Parameter Addressing for US1000
          • Process Parameters Addressing for US1000
          • Setup Parameter Addressing for US1000
          • Status Addressing for US1000
          • Absolute Address Mapping (D0001 - D0301) for US1000
          • Absolute Address Mapping (D0301 - D0700) for US1000
          • Absolute Address Mapping (D0901 - D1300) for US1000
          • Absolute Address Mapping (I0001 - I0768) for US1000
        • UT130/UT150/UT152/UT155/UP150 Addressing
          • Process Parameters Addressing for UT130 / UT150 / UT152 / UT155 / UP150
          • Status Addressing for UT130 / UT150 / UT152 / UT155 / UP150
          • User Area Parameter Addressing for UT130 / UT150 / UT152 / UT155 / UP150
          • Absolute Address Mapping (D0001 - D0312) for UT130 / UT150 / UT152 / UT155 / UP150
          • Absolute Address Mapping (I0001-I0051) for UT150 / UT130 / UT152 / UT155 / UP150
        • UT150L Addressing
          • Process Parameters Addressing for UT150L
          • Status Addressing for Ut150L
          • User Area Parameter Addressing for UT150L
          • Absolute Address Mapping (D0001 - D0306) for UT150L
          • Absolute Address Mapping (I0001 - I0051) for UT150L
        • UT351 Addressing
          • OP Mode Parameters Addressing for UT351
          • OP Related Parameters Addressing for UT351
          • PID Parameters Addressing for UT351
          • Process Parameters Addressing for UT351
          • Setup Parameters Addressing for UT351
          • Communication Parameters Addressing for UT351
          • Control Output Parameters Addressing for UT351
          • PV Input Parameters Addressing for UT351
          • Status Addressing for UT351
          • Absolute Address Mapping (D0001 - D1253) for UT351
          • Absolute Address Mapping (I0001 - I0486) for UT351
        • UT350L Addressing
          • OP Related Parameters Addressing for UT350L
          • PID Parameters Addressing for UT350L
          • Process Parameters Addressing for UT350L
          • Communication Parameters Addressing for UT350L
          • Setup Parameters Addressing for UT350L
          • PV Input Parameters Addressing for UT350L
          • Status Addressing for UT350L
          • Absolute Address Mapping (D0001 - D1253) for UT350L
          • Absolute Address Mapping (I0001 - I0098) for UT350L
        • UT420 Addressing
          • OP Related Parameters Addressing for UT420
          • Process Parameters Addressing for UT420
          • Setup Parameters Addressing for UT420
          • PV Input Parameters Addressing for UT420
          • Status Addressing for UT420
          • Absolute Address Mapping (D0001 - D1274) for UT420
          • Absolute Address Mapping (I0001-I0693) for UT420 / UT450
        • UT450 Addressing
          • OP Related Parameters Addressing for UT450
          • Setup Parameters Addressing for UT450
          • Process Parameters Addressing for UT450
          • PV Input Parameters Addressing for UT450
          • Status Addressing for UT450
          • Absolute Address Mapping (D0001 - D1274) for UT420
          • Absolute Address Mapping (I0001-I0693) for UT420 / UT450
        • UT520/UT550 Addressing
          • Configuration Parameters Addressing for UT520 / UT550
          • Control Mode Parameters Addressing for UT520 / UT550
          • Loop Parameters Addressing for UT520
          • L1 and L2 Mode Parameters Addressing for UT520
          • Linearizer Registers Addressing for UT520
          • Control Parameters Addressing for UT520 / UT550
          • OP Related Parameter Addressing for UT520 / UT550
          • OP Mode Parameter Addressing for UT520-UT550
          • PID Parameters Addressing for UT520 / UT550
          • Error Status Addressing for UT520 / UT550
          • Status Addressing for UT520 / UT550
          • Process Parameters Addressing for UT520 / UT550
          • Absolute Address Mapping (D0001 - D0301) for UT550 / UT520
          • Absolute Address Mapping (D0301 - D0700) for UT520 / UT550
          • Absolute Address Mapping (D0701 - D1100) for UT550 / UT520
          • Absolute Address Mapping (D1101 - D1300) for UT550 / UT520
          • Absolute Address Mapping (I0001 - I0701) for UT550 / UT520
        • UP550 Addressing
          • Configuration Parameters Addressing for UP150
          • Control Mode Parameters Addressing for UP550
          • Loop Parameters Addressing for UP550
          • Error Status Addressing for UP550
          • L1 and L2 Mode Parameters Addressing for UP550
          • Linearizer Registers Addressing for UP550
          • Control Parameters Addressing for UP550
          • OP Mode Parameter Addressing for UP550
          • OP Related Parameter Addressing for UP550
          • PID parameters for UP550
          • Process Parameters Addressing for UP550
          • Status Addressing for UP550
          • Absolute Address Mapping (D0001 - D0300) for UP550
          • Absolute Address Mapping (D0301 - D0700) for UP550
          • Absolute Address Mapping (D0701 - D1300) for UP550
          • Absolute Address Mapping (I0001 - I0714) for UP550
        • UP350 Addressing
          • OP Related Parameters Addressing for UP350
          • PID Parameters Addressing for UP350
          • Process Parameters Addressing for UP350
          • Setup Parameters Addressing for UP350
          • Communication Parameters Addressing for UP350
          • Control Output Parameters Addressing for UP350
          • PV Input Parameters Addressing for UP350
          • Status Addressing for UP350
          • Absolute Address Mapping (D0001 - D1253) for UP350
          • Absolute Address Mapping (I0001 - I0513) for UP350
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address <address> contains a syntax error
          • Address <address> is out of range for the specified device or register
          • Data Type <type> is not valid for device address <address>
          • Device address <address> is Read Only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm properties on COMn
          • Communications error on <channel name> [<error mask>]
        • Device Status Messages
          • Device <device name> is not responding
          • Unable to write to <address> on device <device name>
        • PCLink Specific Errors
          • Unable to read absolute address <start address> to <last address> from device <Device ID>. EC1 = <error code>
          • Failed to read tag '%s' for device id %d
          • Frame received for absolute address <tag address> to <tag address> for device <device id> had checksum error
          • Frame received for tag <tag address> for device <device id> had checksum error
    • Yokogawa CX
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Device Configuration
      • Optimizing Communications
      • Data Types Description
      • Automatic Tag Database Generation
      • Address Descriptions
        • CX1006_Addressing
        • CX1206_Addressing
        • CX2010_Addressing
        • CX2020_Addressing
        • CX2210_Addressing
        • CX2220_Addressing
        • CX2410_Addressing
        • CX2420_Addressing
        • CX2610_Addressing
        • CX2620_Addressing
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is Read Only
          • Missing address
        • Device Status Messages
          • Device '<device name>' is not responding
          • Device '<device name>' login failed. Check username and password
          • Device '<device name>' login not accepted. Choose username of 'admin' or 'user'
          • No more logins at this level on device '<device name>'
          • Unable to write to '<address>' on device '<device name>'
          • Write allowed for admin level only Device '<device name>', Tag '<address>')
          • Write allowed for devices with math option only (Device '<device name>', Tag '<address>')
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the Yokogawa CX Ethernet device driver
    • Yokogawa Darwin Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Device Configuration
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • DA100-1_Addressing
        • DA100-2_Addressing
        • DR231 Addressing
        • DR232 Addressing
        • DR241 Addressing
        • DR242 Addressing
        • DR130 Addressing
        • DC100-1 Addressing
        • DC100-2 Addressing
      • Automatic Tag Database Generation
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is Read Only
          • Missing address
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>.'
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the Yokogawa Darwin Ethernet device driver
    • Yokogawa Darwin Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Device Configuration
      • Data Types Description
      • Address Descriptions
        • DA100-1_Addressing
        • DA100-2_Addressing
        • DR130 Addressing
        • DR231 Addressing
        • DR232 Addressing
        • DR241 Addressing
        • DR242 Addressing
        • DC100-1 Addressing
        • DC100-2 Addressing
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is Read Only
          • Missing address
          • The device '<device name>' responded with a NAK to a read request starting at address '<address>'. The requested address may not exist in the device
        • Serial Communications
          • Communications error on '<channel name>' [<error mask>]
          • COMn does not exist
          • COMn is in use by another application
          • Error opening COMn
          • Unable to set comm properties on COMn
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>.'
    • Yokogawa DX Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Device Configuration
        • Device Properties — Redundancy
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • S120 Addressing for 100 Series
        • DX102 Addressing
        • DX104 Addressing
        • DX106 Addressing
        • DX112 Addressing
        • S120 Addressing for 200 Series
        • DX204 Addressing
        • DX208 Addressing
        • DX210 Addressing
        • DX220 Addressing
        • DX230 Addressing
        • S123 Addressing for DX210, DX220, DX230
        • MV100 Addressing
        • MV200 Addressing
        • DX1002 Addressing
        • DX1004 Addressing
        • DX1006 Addressing
        • DX1012 Addressing
        • DX2004 Addressing
        • DX2008 Addressing
        • DX2010 Addressing
        • DX2020 Addressing
        • DX2030 Addressing
        • DX2040 Addressing
        • DX2048 Addressing
      • Event Log Messages
        • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Device Status Messages
          • Detected unsupported model series '<model series>' on device '<device name>'. Using configured model series '<model series>' for communications
          • Device '<device name>' is not responding
          • Model series '<model series>' read from device '<device name>' does not match the series of the configured model '<configured model>'. Auto generated tags may not validate
          • Unable to write to '<address>' on device '<device name>'
          • Write allowed for admin level only
          • Write allowed for devices with math option only
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the Yokogawa DX Ethernet device driver
        • Automatic Tag Database Generation Messages
          • Unable to generate a tag database for device '<device name>'. Reason: Device '<device name>' login failed. Check username and password
          • Unable to generate a tag database for device '<device name>'. Reason: Device '<device name>' login not accepted
          • Unable to generate a tag database for device '<device name>'. Reason: Device '<device name>' login failed. No more logins at this user level
          • Unable to generate a tag database for device '<device name>'. Reason: Device '<device name>' responded with error '<error code>'
    • Yokogawa DXP
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
          • Automatic Tag Database Generation
        • Device Properties — Device Configuration
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
        • DXP100_Addressing
        • DXP200_Addressing
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is Read Only
          • Missing address
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
          • Write allowed for admin level only
          • Write allowed for devices with math option only
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the Yokogawa DXP Ethernet device driver
        • Automatic Tag Database Generation Messages
          • Unable to generate a tag database for device '<device name>'. Reason: Device '<device name>' login failed. Check username and password
          • Unable to generate a tag database for device '<device name>'. Reason: Device '<device name>' login failed. No more logins at this user level
          • Unable to generate a tag database for device '<device name>'. Reason: Device '<device name>' login not accepted. Choose username of 'admin' or 'user'
          • Unable to generate a tag database for device '<device name>'. Reason: Device '<device name>' responded with error '<error code>'
    • Yokogawa DX Serial
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Device Configuration
      • Data Types Description
      • Address Descriptions
        • DX102 Addressing
        • DX104 Addressing
        • DX106 Addressing
        • DX112 Addressing
        • DX204 Addressing
        • DX208 Addressing
        • DX210 Addressing
        • DX220 Addressing
        • DX230 Addressing
        • MV100 Addressing
        • MV200 Addressing
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is Read Only
          • Missing address
        • Serial Communications
          • Communications error on '<channel name>' [<error mask>]
          • COMn does not exist
          • COMn is in use by another application
          • Error opening COMn
          • Unable to set comm parameters on COMn
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
    • Yokogawa GX Ethernet
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Device Configuration
        • Device Properties — Redundancy
      • Optimizing Communications
      • Data Types Description
      • Address Descriptions
    • Yokogawa HR
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Device Configuration
      • Data Types Description
      • Address Descriptions
        • HR2400 (10CH) Addressing
        • HR2400 (20CH) Addressing
        • HR2400 (30CH) Addressing
      • Error Descriptions
        • Address Validation
          • Missing address
          • Device address '<address>' contains a syntax error
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' is Read Only
        • Serial Communications
          • COMn does not exist
          • Error opening COMn
          • COMn is in use by another application
          • Unable to set comm parameters on COMn
          • Communications error on '<channel name>' [<error mask>]
        • Device Status Messages
          • Device '<device name>' is not responding
          • Unable to write to '<address>' on device '<device name>'
    • Yokogawa MW
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Device Configuration
      • Optimizing Communications
      • Data Types Description
      • MW100 Addressing
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is Read Only
          • Missing address
        • Device Status Messages
          • Device '<device>' login failed. Check username and password
          • Device '<device>' responded with error '<errnum>' (Tag '<address>')
          • Device '<device>' responded with error '<error>'
          • Device '<device>' returned error '2 <Value exceeds setting range>'. (Tag '<address>')
          • Device '<device name>' is not responding
          • Device <device name> login failed. No more logins at this user level
          • Unable to set clock for device '<device>'
          • Unable to start math for device '<device>'
          • Unable to start measuring for device '<device>'
          • Unable to write to '<address>' on device '<device name>'
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the Yokogawa MW Ethernet Device Driver
    • Yokogawa MX
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Ethernet Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
        • Device Properties — Device Configuration
      • Optimizing Ethernet Communications
      • Data Types Description
      • Address Descriptions
      • Error Descriptions
        • Address Validation
          • Address '<address>' is out of range for the specified device or register
          • Data Type '<type>' is not valid for device address '<address>'
          • Device address '<address>' contains a syntax error
          • Device address '<address>' is Read Only
          • Missing address
        • Device Status Messages
          • Detected Yokogawa MX 100 Unit Style '<version>' with '<number of modules>' modules and a total of '<number of channels>' channels on device '<device name>'
          • Device '<device>' response contains framing errors (Tag '<tag address>')
          • Device '<device name>' has no FIFO data for channel (Tag '<address>')
          • Device '<device name>' is not responding
          • Device '<device name>' responded with error '<error code>' (Tag '<address>', Size '<size>')
          • Unable to write to '<address>' on device '<device name>'
        • Driver Error Messages
          • Winsock initialization failed (OS Error = n)
          • Winsock V1.1 or higher must be installed to use the Yokogawa MX Ethernet device driver
    • Yokogawa YS100
      • Overview
      • Setup
        • Channel Properties — General
        • Channel Properties — Serial Communications
        • Channel Properties — Write Optimizations
        • Channel Properties — Advanced
        • Device Properties — General
        • Device Properties — Scan Mode
        • Device Properties — Timing
        • Device Properties — Auto-Demotion
        • Device Properties — Tag Generation
          • Automatic Tag Database Generation
        • Device Properties — Settings
      • Data Types Description
      • Address Descriptions
        • YS150 Addressing
        • YS170 Addressing
      • Error Descriptions
        • Address Validation
          • Address <address> is out of range for the specified device or register
          • Data Type <type> is not valid for device address <address>
          • Device address <address> contains a syntax error
          • Device address <address> is not supported by model <model name>.'
          • Device address <address> is Read Only
          • Missing address
        • Serial Communications
          • Communications error on <channel name> [<error mask>]
          • COMn does not exist
          • COMn is in use by another application
          • Error opening COMn
          • Unable to set comm parameters on COMn
        • Device Status Messages
          • Device <device name> is not responding
          • Unable to write to <address> on device <device name>.'
        • YS100 Serial Device Specific Messages
          • Failed to read static initialization data for device <device name>
          • No response to watchdog write on device <device name>
          • Received unexpected response for tag in block <tag name> on device <device name>,