Enable and Train Step Check

Work with Procedures in Vuforia Editor > Step Check™ > Enable and Train Step Check

To train and utilize Step Check in a procedure, the following steps must be completed:

1. Enable Step Check for a Procedure in Vuforia Editor

2. Collect Training Images in Vuforia Vantage

3. Review Collected Images and Data in Vuforia Editor

4. Start Training and Test the Results

5. Activate Step Check and Republish

Things to Keep in Mind

Before enabling Step Check for a step or procedure, be aware of the following:

• A model must be present in a procedure in order for the Pass/Fail with Step Check option to appear in the feedback type drop-down on a step card.

• The STEP CHECK tab only appears once at least one step in a procedure contains a marker.

• If you update a procedure to remove the 3D model, all Step Check UI components will be hidden.

• If your procedure only includes one step that has a marker that also has Pass/Fail with Step Check selected as the feedback type, and the marker is then removed, all Step Check UIs disappear, and the feedback type for that step will automatically be changed to Pass/Fail.