Project 1: Broadband Source model

Creo Tutorials > Creo Flow Analysis Tutorials > Advanced Tutorials > Creo Flow Analysis Advanced Tutorials > Tutorial 10 - Propeller Acoustics > Project 1: Broadband Source model

In this project, the computational domain, mesh, and physics settings are defined, and a steady-state simulation is performed for the acoustics of the propeller. The steady-state results of the Broadband source model will be used as the initial solution for the transient simulation in Project 2: Ffowcs-Williams Hawkings (FWH) model. It is recommended that users do not skip this simulation.

The exercises in the Flow Analysis simulation are:

1. Broadband Source Model Simulation Exercise 1— Adding the Simulation Domain

2. Broadband Source Model Simulation Exercise 2— Creating Boundary Conditions

3. Broadband Source Model Simulation Exercise 3— Preparing the Mesh

4. Broadband Source Model Simulation Exercise 4— Defining Physics Modules

5. Broadband Source Model Simulation Exercise 5— Assigning Boundary Conditions

6. Broadband Source Model Simulation Exercise 6— Performing the Simulation

7. Broadband Source Model Simulation Exercise 7— Analyzing Results

Was this helpful?