SysML, UAF, UML, and UPDM Profiles > UPDM profiles > Products and elements - DODAF aliases > Elements > Vision (UPDM - DoDAF aliases)
  
Vision (UPDM - DoDAF aliases)
Creation
To create a Vision:
• From an Architectural Description or Service Description: right-click the Architectural Description or Service Description, point to New, point to DoDAF, point to Capability, and then click Vision.
• From a CV-1 Vision: click the Vision toolbar button, and then click in free space on the diagram.
Appearance
When shown on a CV-1 Vision, a Vision appears as follows:
Relationships
The following relationships are of importance to a Vision:
• Vision Statement elements can be applied to a Vision: on a CV-1 Vision use a Note Link to connect the Vision Statement to the Vision. Alternatively, right-click a Vision, point to Links, and then click Statement.
The following sections provide information about how a Vision is used in the model.
Create a Vision from
• Architectural Description
• CV-1 Vision
• Service Description
Create from a Vision
In addition to the UPDM elements that can be created from all UPDM elements ( Representation, Definition, Information, and Metadata):
• Desired Effect
• Vision Statement
Shown on these diagrams, tables and matrices
In addition to the AV-2 Integrated Dictionary and StdV-1 Standards Profile, which can show all UPDM elements:
• CV-1 Vision
UPDM writeable properties
The following writeable properties are available on the Vision tab of a Vision element's Property Pages:
• URI