To Create a Tapered Extrusion

Creo Direct > Designing in the Creo Direct Environment > Working in Part Mode > Working with 3D Geometry > Creating 3D Geometry > Extruded Geometry > To Create a Tapered Extrusion

1. Create or open a 3D part with one or more sketched sections.

2. Click Home >

Extrude.

3. Select a sketched section. An Options Toolbar and a linear dragger appear.

4. Click

. An angular dragger appears.

5. Pull the dragger to dynamically adjust the taper angle of the selected sketch. Alternatively, double-click the taper angle value and type a new value. The tapered extrusion is created.