SysML, UAF, UML, and UPDM Profiles > UPDM profiles > Products and elements - NAF aliases > Elements > Measurement set (UPDM - NAF aliases)
  
Measurement set (UPDM - NAF aliases)
Creation
To create a Measurement Set:
• From an Architectural Description or Service Description: right-click the Architectural Description or Service Description, point to New, point to NAF, point to All, and then click Measurement Set.
• From an NAV-3 Measurement Definition: click the Measurement Set toolbar button, and then click in free space on the diagram.
Appearance
When shown on an NAV-3 Measurement Definition, a Measurement Set appears as follows:
Relationships
The following relationships are of importance to a Measurement Set:
• UML Generalizations define Measurement Set inheritance ( NAV-3 Measurement Definition).
• Link a Measurement Set to Actual Property Set elements that specify values: right-click the Measurement Set, point to Links, and then click Actual Property Set
The following sections provide information about how a Measurement Set is used in the model.
Create a Measurement Set from
NAV-3 Measurement Definition
Architectural Description
Service Description
Create from a Measurement Set
In addition to the UPDM elements that can be created from all UPDM elements ( Alias, Definition, Information and Metadata):
Measurement
Property
Shown on these diagrams, tables and matrices
In addition to the NAV-2 Integrated Dictionary and NTV-1 Standards Profile, which can show all UPDM elements:
NAV-3 Measurement Definition
UPDM writeable properties
The following writeable properties are available on the Measurement Set tab of a Measurement Set element's Property Pages:
• URI