SysML, UAF, UML, and UPDM Profiles > UPDM profiles > Products and elements - DODAF aliases > Elements > Standard (UPDM - DoDAF aliases)
Standard (UPDM - DoDAF aliases)
To create a Standard:
From an Architectural Description or Service Description: right-click the Architectural Description or Service Description, point to New, point to DoDAF, point to Standard, and then click Standard.
From an StdV-2 Standards Definition: click the Standard toolbar button, and then click in free space on the diagram.
You can convert a Standard to a Functional Standard or Technical Standard: right-click the Standard, point to Convert To, and then click the required command.
When shown on an StdV-2 Standards Definition, a Standard appears as follows:
The following relationships are of importance to a Standard:
To link a Standard to elements that conform to that Standard: right-click the element, point to Links, and then click Conforms To.
Forecast relationships link a Standard to forecasted future Standard elements.
The following sections provide information about how a Standard is used in the model.
Create a Standard from
Architectural Description
Service Description
StdV-2 Standards Definition
Create from a Standard
Only the UPDM elements that can be created from all UPDM elements ( Representation, Definition, Information, and Metadata).
Shown on these diagrams, tables and matrices
In addition to the AV-2 Integrated Dictionary and StdV-1 Standards Profile, which can show all UPDM elements:
StdV-2 Standards Definition
StdV-2 Standards Forecast Table
UPDM writeable properties
The following writeable properties are available on the Standard tab of a Standard element's Property Pages: