Creo Simulate > Modeling Structure and Thermal Problems > Features > Datum Curve > To Create a Projected Datum Curve by Sketching
To Create a Projected Datum Curve by Sketching
1. With a model open, click Refine Model > Project. The Project tab opens.
2. Click the References tab. The References panel opens.
3. Select Project a sketch from the list.
4. Click the Sketch collector and either select a sketched curve in the graphics window or click Define and use the Sketch dialog box that opens to create a sketched curve to project.
* If you are using an internal sketch and want to modify it, click Edit on the References slide-up panel and use the Sketch dialog box.
5. Click the Surfaces collector and click a surface in the graphics window on which to project the sketched curve.
6. Click the Direction Reference collector and select a plane, an axis, an axis of a coordinate system, or a straight entity to use as the projection direction reference.
7. Click .
For more information, refer to the Part Modeling Help.
Return to Editing Curves in Creo Simulate