Creo™ Schematics 4.0 Help Center > Design Basics > Working with an Internal Catalog > Ports > To Set Fiber End Geometry
  
To Set Fiber End Geometry
1. Perform one of the following actions:
Click Design > Design Properties to specify fiber end geometry for a diagram type. The Design Properties dialog box opens.
In the Catalog Explorer, select a port artifact and click . The Port Properties dialog box opens.
In an open sheet, select a port, right-click and choose Properties from the shortcut menu. The Port Properties dialog box opens.
* 
These options are not available for fiber ports.
2. Click Fiber End Details. The Design Properties: Fiber End Details or Port Shape Properties: Fiber End Details dialog box opens.
3. Select the diagram type from the Diagram type list.
4. Type values for the following parameters:
Max connections per port—Maximum number of connections for each port. Setting the value to 0 allows an unlimited number of connections to the port.
Number of fans—Number of fans.
Distance x, Distance y, and Distance z—x, y, and z dimensions.
* 
Distances x and y cannot be set to 0.
5. Click OK.