To Reverse the Direction of a Fiber
1. In an open design, click > . The Format report dialog box opens.
2. Select the Fiber check box on the General tab.
4. Click
![](../Schematics_hc/images/dgui_report_generate.png)
. The
Report Results dialog box opens.
5. Right-click the fiber in the Report Results dialog box and choose Reverse Direction from the shortcut menu.
6. Click
![](../Schematics_hc/images/dgui_report_generate.png)
to rerun the report. The new fiber direction is updated in the report.
7. On the Report Results dialog box, click Close.
8. On the Format report dialog box, click Close.
| Whenever the direction of a fiber is reversed, make sure to update the shapes so that the directional arrows indicate the correct direction of the fiber. |
Fixing the Direction of a Fiber
When the direction of a fiber is not the same for all segments you can fix it so that all fiber segments have the same direction.
1. Click > and run a report.
2. Right-click the fiber in the Report Results dialog box and choose Fix Direction from the shortcut menu.
3. Click
![](../Schematics_hc/images/dgui_report_generate.png)
to rerun the report. The fiber segment directions are the same.
4. On the Report Results dialog box, click Close.
5. On the Format report dialog box, click Close.