Creo™ Schematics 4.0 Help Center > Design Basics > Design and Sheet Management > Location Sets > To Move Location Set Sheets
  
To Move Location Set Sheets
1. Click Design and click the arrow next to Rows and Columns.
2. Click Location Set Explorer. The Location Set Explorer dialog box opens.
3. Select the sheet from the Sheets list, and click or to move the sheet up or down. If you select the Sequential sheet numbering check box, the start and end column numbers update after sheets are moved.
4. Click to move the selected sheet to another location set. Select a location set from the Location sets list and click OK. The sheet is moved to the new location set.
5. Click Add Sheet to display all sheets that are not in the selected set. Select a sheet and click OK. The selected sheet is moved to the selected location set.
6. Click to update cross-reference shapes 'to' and 'from' the selected sheet.
7. Click Update all sheets to update all sheets in the selected location set.
* 
• Moving sheets between location sets affect the sheet's column numbers and the column numbers of other sheets in both location sets. This can affect cross-reference shapes on the sheet itself and cross-reference shapes on other affected sheets.
• Closed sheets are updated when you open them.