Creo™ Schematics 4.0 Help Center > Design Basics > Working with an Internal Catalog > Splices > To Insert a Splice
  
To Insert a Splice
1. Click Diagramming > Catalog Explorer. The Catalog Explorer opens.
2. Create a fiber definition and shape.
* 
The fiber must be of the Wiring or Block diagram type.
3. Click Diagramming > . Move the pointer over a fiber on the sheet. The pointer becomes T-shaped.
4. Click the fiber to place the splice and then route the splice fiber away from the main fiber. The default splice is a Butt splice. To change to a Through splice, right-click and choose Splice Type > Through Splice from the shortcut menu.