GeomIntegrityCHECK Checks
You can run GeomIntegrityCHECK in all Creo ModelCHECK operating modes using the MC_VDA_RUN configuration option in the config_init.mc file. Applicable GeomIntegrityCHECK checks and their possible values in Part, Assembly, or Drawing modes follow. Click the check name to see the check definition and suggested settings. See the GeomIntegrityCHECK topics for details about the GeomIntegrityCHECK checks.
M1_TINY_ELMNT (Tiny Elements)
Y/N/E/W
M2_IDENTICAL_ELMNT (Identical Elements)
Y/N/E/W
M3A_POSITION_CONT (Position Continuity)
Y/N/E/W
M3B_TANG_CONT (Tangential Continuity)
Y/N/E/W
M3C_CURV_CONT (Curvature Continuity)
Y/N/E/W
M4_POLYN_DEG (Polynomial Degree)
Y/N/E/W
M5_WAVINESS (Waviness)
Y/N/E/W
M6_KNOT_DIST (Knot Distance)
Y/N/E/W
C7_SELF_DIST (Distance from Itself)
Y/N/E/W
D28_IGES_TEXT (IGES Conform Text)
Y/N/E/W
SU8_TINY_SEG_EDGE (Tiny Segment Edge)
Y/N/E/W
SU9_TINY_CURV_RAD (Minimum Curvature Radius)
Y/N/E/W
SU10_BOUND_ANGLE (Angle between Edge Curves)
Y/N/E/W
SU11_NORM_REVERSAL (Reversal of Normals)
Y/N/E/W
SU12_PATCH_DIST (Patch Distribution)
Y/N/E/W
SU13_UNOC_PATCH_ROW (Unoccupied Patch Rows)
Y/N/E/W
F14_BOUND_DIST (Penetration or Distance of Boundaries)
Y/N/E/W
F15_SURF_DIST (Proximity of a Boundary Curve to Its Surface)
Y/N/E/W
F16_SIM_ORIENT (Parallel Path or Similar Orientation)
Y/N/E/W
F17_NUM_SEG (Number of Segments in a Boundary Curve)
Y/N/E/W
T18_NUM_FACE (Junction or Number of Faces Per Edge)
Y/N/E/W
T19_NORMAL_ORIENT (Orientation of Similar Normals)
Y/N/E/W
T20_KNIFE_EDGES (Knife Edge)
Y/N/E/W
SO21_DIST_VERT_EDGE (Distance to Vertex Edge)
Y/N/E/W
SO22_DIST_VERT_FACE (Distance to Vertex Face)
Y/N/E/W
SO23_HIST_DELETE (Deletion of History)
Y/N/E/W
SO24_EXTRA_GEOM (Auxiliary Geometry)
Y/N/E/W
SO25_CAVITIES (Cavities)
Y/N/E/W
SO26_MULT_BODY (Multi-Body Solids)
Y/N/E/W
SO27_MULT_SOLID (Multi-Solid Parts)
Y/N/E/W
Was this helpful?