About Standard Flange Wall Shapes

Sheetmetal > Designing in Sheetmetal Design > Creating and Modifying Walls > Attached Walls > Flange Walls > About Standard Flange Wall Shapes

There are two types of standard flange wall shapes as shown below:

• Hem—Open, Flushed, Joggle, Duck, C, and Z

• Other standard shapes—I, Arc, and S

Open	Flushed	Joggle	Duck	C	Z

Hem shapes

I	Arc	S

Other standard shapes

Keep in mind the following when using a standard flange wall shape:

• You cannot change the material thickness direction for an Open, Flushed, Joggle, Duck, C, or Z flange.

• The bend radius value and material thickness direction are only applied to a shape that is not tangent to the attachment wall.

• You can apply rip relief only to a flange with a flush shape.

• Stretch relief is not available for a duck-shaped flange.