Generate a Prediction Calculation Result over Range of Temperatures Graph
When Calculation result over range of temperatures is selected on the Data Type page of the Graph Wizard, you can graph a calculation result over a range of temperatures.
2. On the Prediction Graph Type page, select Calculation result over range of temperatures and click Next. The Select Calculation page appears. All data fields that store prediction calculation results are available for selection.
3. For Data field, select the result you want to graph and click Next. The Select Temperatures page appears so that you can specify the temperatures at which you want to show results on the graph. All temperatures must be entered in degrees C.
Because the Range of temperatures checkbox is selected by default, the options for specifying start and end temperatures and an interval are available.
4. If you want to specify a range of temperatures, do the following:
a. Ensure that the Range of temperatures checkbox is selected.
b. For From, enter the lowest temperature for which to graph the result. The default is 0.
c. For To, enter the highest temperature at which to graph the result. The default is 100.
d. For Increment, enter the interval to use to determine the other temperatures at which to show results. The default is 10.
5. If you want to supply specific temperatures, do the following:
a. Select the Selected temperatures checkbox. The field below this option becomes available so that you can enter the temperatures at which you want to graph results.
b. Enter each temperature, using spaces to separate entries.
6. When finished, click Next. The Filter Data page appears so that you can indicate which records to use for the graph.
7. Complete this page, which is shown by most prediction reports. For more information, see
Filter Data Page.
8. Click Next. The Graph Options page appears so that you can specify how the graph is to look.
9. Complete the
Graph Options page and all remaining pages to generate the graph. For more information, see
Specifying Graph Options.
Once the wizard closes, the Select Configuration window opens if more than one configuration exists in the System file.
10. If the Select Configuration window opens, select the appropriate configuration and click OK to generate the graph.