Steps for Completing Prediction FIDES Ruggedized Factor Files
The following table provides guidance on the steps you take to complete Prediction FIDES Ruggedized Factor files. In addition to supplying general instructions and descriptions, this topic references other topics where appropriate. These referenced topics typically describe how to perform the actions indicated.
 |
The actions in the following table are numbered to indicate that they are performed sequentially. To successfully complete Prediction FIDES Ruggedized Factor files, you must complete these actions in the order in which they are listed.
|
|
Action
|
Description
|
|
|---|---|---|
|
|
1. Ensure that a FIDES model is selected as the calculation model for the top-most assembly in system file.
|
Prediction FIDES Ruggedized Factor files can be created and opened only when a FIDES model is selected for the top-most assembly in the System Tree Items table. In the Calculation Data pane for the top-most assembly, ensure that a FIDES model is selected for Calculation model.
|
|
|
2. Create or open the Prediction FIDES Ruggedized Factor file and complete the answer set shown in the table.
|
Create or open the Prediction FIDES Ruggedized Factor file for and complete the answer set shown in the table so that the appropriate Pi Ruggedized value is calculated. For more information, see Ruggedized Factor Questions.
|
|
|
3. Assign the Prediction FIDES Ruggedized Factor file to the appropriate assemblies and/or parts.
|
When a Prediction FIDES Ruggedized Factor file is selected for an assembly, all items beneath it inherit this selection. You then need only to specify file overrides for these items. For more information, see Enabling a Prediction FIDES Ruggedized Factor File for a FIDES Assembly or Part.
|