|
Parameter
|
Type
|
Description
|
|---|---|---|
|
Foreign
|
Checkbox [Parts Count also]
|
Indicates whether the device is made in China. If this checkbox is selected, the failure rate of the part is calculated based on Appendix A for the 299C Parts Count or Parts Stress model chosen.
|
|
Quality Level
|
Choice List [Parts Count also]
|
The appropriate quality screening level of the device. Accepted quality levels and values for general diodes follow. For the quality value assigned to a specific diode, see Chinese Standard GJB/z 299C.
• A2 = 0.03
• A3 = 0.05
• A4 = 0.10
• A5 = 0.20
• B1 = 0.40 or 5.0
• B2 = 1.00
• C = 5.00
|
|
Application
|
Choice List [Parts Count also]
|
The application of the device. Many different choices are available, including General Purpose, Switching, and more.
|
|
Regulator
|
Checkbox
|
Required only when the application is Voltage Regulator, Ref, Zener. Not required when Foreign is selected.
When selected, the device is used as a voltage regulator.
|
|
Silicon
|
Checkbox (Parts Count also)
|
Not required when the application is Current Regulator or Voltage Regulator, Ref, Zener.
When selected, the device is made of silicon.
|
|
# of Stacks
|
Integer
|
Required only when the application is Rectifier, High Volt. Stacks. Not required when Foreign is selected.
The number of diodes stacked upon each other.
|
|
Construction Type
|
Choice List
|
Not required when the application is Current Regulator or Voltage Regulator, Ref, Zener. Also not required when Foreign is selected.
The contact construction of the device. Choices are:
• Metallurgically
• Non-Metallurgically/Spring Loaded
|
|
[Voltage Parameters]
|
---
|
Not required when the application is Current Regulator or Voltage Regulator, Ref, Zener.
For more information, see Voltage Parameters
|
|
[Current Parameters]
|
---
|
Not required when the application is Current Regulator or Voltage Regulator, Ref, Zener. Also not required when Foreign is selected.
For more information, see Current Parameters
|
|
[Power Parameters]
|
---
|
Required only when the application is Current Regulator or Voltage Regulator, Ref, Zener. Not required when Foreign is selected.
For more information, see Current Parameters
|
|
[Temperature Parameters]
|
---
|
For more information, see Comprehensive Temperature Parameters.
|
|
[Derating Parameters]
|
---
|
For more information, see Derating Parameters.
|