Initiates the check-out process for the selected part.

Initiates the check-in process for the selected part.

Cancels the checkout of the selected part, and any changes are lost.

Insert > Insert Existing

Opens the Insert New window, so you can add an existing part as a child of the selected part.

Insert > Insert New

Opens the Insert New window, so you can create and add a new part.

Insert > Insert Recently Created

Opens the Insert New window, so you can add a recently created part as a child of the selected part.

Replace > Replace with Existing

Opens theInsert New window, so you can replace the selected part with a part that you search for in the database.

Replace > Replace with New

Opens the Insert New window, so you can replace the selected part with a part that has been created in this session.

Replace > Replace with Alternate/Substitute

Opens a search window, so you can replace the selected part with one of it’s alternates or substitutes.

Replace > Replace with New Downstream Part Number

Adds the copied part and its upstream structure, and creates new equivalence links between the downstream BOM and the upstream BOM.

Removes the selected part from the structure.

Removes all sub-assemblies from the selected assembly. Removing all sub-assemblies removes all instances of the assembly that appear in the selected explorer, and promotes all child parts to the next highest assembly.

Opens the Edit Common Attributes window, which can be used to change the name of a manufacturing object, it's category, or it's unit representation (for example, Each, or As Needed).

Opens the Rename window so you can rename the selected part. The name change applies to all versions of the part, not just the selected version.

Allows you to create a downstream part iteration with the a view that is downstream to the selected upstream part. Associative BOM links are also created.

Opens the Add Children From Upstream BOM panel, so that you can create a downstream part that is equivalent to the upstream part that it is being created from. For more information, see Transforming an eBOM into an mBOM.

Opens the New Branch window so you can create a new branch of iterations for a specific part, by defining a new view (peer or descendant), a new BOM Type, or new alternate branch.

Opens the New Alternate BOM window so you can create a New Alternate Branch for the selected part.

Allows you to extend the equivalent link properties, such as related parts and views, of the selected assembly to the assembly selected in the downstream view. For more information see Extending BOM Equivalences.

Allows you to search for downstream assemblies to which you can extend the equivalent link properties, such as related parts and views, of the assembly selected in the downstream view. For more information see Extending BOM Equivalences.

Opens the Update Alternate BOM Number window so you can make modifications to an alternate branch.

Creates a new one-off version of the selected object. A one-off version is a branch version taken from any version within the normal version sequence (for example, A, B, C). A one-off version is labeled with the version from which it is created, followed by a dash and number, such as B-1.

A one-off version is used to record a unique modification to a released design. It is intended to support the modification of objects that have been recorded in a configuration, used to create an instance, and then modified. The fact that an object has been altered must be recorded in the system, so a one-off version of the altered object is created.

Saves the selected part as a new part with a new downstream part number.

View the choices that have been assigned to the item. Excluded choices appear with a negative symbol in front of them. In Product Structure Explorer draft mode newly added, deleted, included or excluded choices are marked up.

Deletes the selected part.

Opens the Set State window, so you can change the state of the selected object.

Opens the New Promotion Request window, so you can promote the selected object.

Baseline > Add to Baseline

Opens the Add to Baseline window, so you can add the selected part to a new or existing baseline.

Baseline > Remove from Baseline

Opens the Baseline List window, so you can remove the selected part from an existing baseline.

Opens the Usage Splitting window, which allows you to define the quantity of a part that is to be kept on the current usage, and the quantity of a part that is to be made available for other uses.

Reverts to the operation part allocation analysis criteria defined in the Preferences window (All, None, Custom).

If occurrence links exist, updates the structural position of a downstream part relative to its equivalent upstream part, if the upstream part has been moved to a new position in the assembly.

Processes downstream usages for which at least one valid occurrence link can be found to an upstream BOM.

Updates a part's equivalent link to the latest equivalent part's version. If the updated downstream part is an assembly, the positioning of the child parts is also updated.

Displays the downstream equivalence history of the selected part.

Displays in the structure where the equivalent part of the selected part is located.

Creates a new version of a part. If associated CAD documents exist, you have the option to also create new versions of those documents.

If the new revision is not associated with the latest revision of the equivalent upstream part, you will need to update the equivalence link.

Create a representation for an Windchill MPMLink objects. Representations are used as illustrations in Work Instructions.

Launches the Windchill PDMLink HTML Representations page, which lists all representations for the selected object.