Measurement (UPDM - MODAF aliases)
Creation
To create a Measurement:
• From a
Measurement Set: right-click the Measurement Set, point to New, point to MODAF, and then click Measurement. On the Select Type dialog, create or select the type of the Measurement, or create an untyped Measurement.
• From an
AV-3 Measurement Definition: click the Measurement button, and then click the Measurement Set that is to own the Measurement. On the Select Type dialog, create or select the type of the Measurement, or create an untyped Measurement.
Measurement button, and then click the Measurement Set that is to own the Measurement. On the Select Type dialog, create or select the type of the Measurement, or create an untyped Measurement.Appearance
When shown on an
AV-3 Measurement Definition, a Measurement appears as follows:
Relationships
There are no relationships that are of significant importance to a Measurement.
The following sections provide information about how a Measurement is used in the model.
Create a Measurement from
Create from a Measurement
Only the UPDM elements that can be created from all UPDM elements (
Alias,
Definition,
Information and
Metadata).
Shown on these diagrams, tables and matrices
In addition to the
AV-2 Integrated Dictionary and
TV-1 Standards Profile, which can show all UPDM elements:
UPDM writeable properties
The following writeable properties are available on the Measurement tab of a Measurement element's Property Pages:
• minValue
• maxValue
• URI