SysML, UAF, UML, and UPDM Profiles > UPDM profiles > Products and elements - DODAF aliases > Elements > Measurement (UPDM - DoDAF aliases)
  
Measurement (UPDM - DoDAF aliases)
Creation
To create a Measurement:
• From a Measure Type: right-click the Measure Type, point to New, point to DoDAF, and then click Measurement. On the Select Type dialog, create or select the type of the Measurement, or create an untyped Measurement.
• From an AV-3 Measurement Definition: click the Measurement toolbar button, and then click the Measure Type that is to own the Measurement. On the Select Type dialog, create or select the type of the Measurement, or create an untyped Measurement.
Appearance
When shown on an AV-3 Measurement Definition, a Measurement appears as follows:
Relationships
There are no relationships that are of significant importance to a Measurement.
The following sections provide information about how a Measurement is used in the model.
Create a Measurement from
• AV-3 Measurement Definition
• Measure Type
Create from a Measurement
Only the UPDM elements that can be created from all UPDM elements ( Representation, Definition, Information, and Metadata).
Shown on these diagrams, tables and matrices
In addition to the AV-2 Integrated Dictionary and StdV-1 Standards Profile, which can show all UPDM elements:
• AV-3 Measurement Definition
• CV-3 Capability Phasing
• OV-1c Operational Performance Attributes
• OV-3 Operational Resource Flow Matrix
• SV-6 Systems Resource Flow Matrix
• SV-7 Systems Measures Matrix
UPDM writeable properties
The following writeable properties are available on the Measurement tab of a Measurement element's Property Pages:
• minValue
• maxValue
• URI