SHA_NEW_BY_OUTLINE creates a sheet metal part, based on a completely
closed 2D profile.
+-----------------<----------------+
| |
-->(SHA_NEW_BY_OUTLINE)--+--(:SHEET_PART)---|sheet|---------+-->
| |
+--(:WP)-----------|wp|------------+
| |
+--(:MATERIAL)-----|material name|-+
| |
+--(:THICKNESS)----|thickness|-----+
| |
+--(:REVERSE)----------------------+
| |
+--(:KEEP_WP)------+--(:ON)---+----+
| |
+--(:OFF)--+
The following options are available to create a sheet metal part by a
closed outline (profile).
-
:SHEET_PART
- specifies the new sheet metal part to be created.
-
:WP
- specifies the workplane containing the outline (closed profile).
-
:MATERIAL
- specifies the material id for the new sheet metal part.
-
:THICKNESS
- specifies the material thickness.
-
:REVERSE
- reverses the extrusion direction relative to the workplane.
-
:KEEP_WP
- specifies whether or not to keep the workplane.
Use this action to start a design with a flat sheet metal part.
SHA_ADD_LIP terminate action
SHA_ADD_HEM terminate action
SHA_ADD_SHEET_BY_OUTLINE terminate action
SHA_OFFSET terminate action
SHA_ADD_SHEET_BY_POLYLINE terminate action
SHA_NEW_BY_POLYLINE terminate action