SHA_ADD_HEM adds a hem, a bend of 180 degree, to a sheet metal part.
+------------<-------------------------+
| |
-->(SHA_ADD_HEM)--+--(:HEM_EDGE)-----|edge|--------------+-->
| |
+--(:HEM_LENGTH)---|length|------------+
| |
+--(:HEM_PROCESS)--|process name|------+
| |
+--(:HEM_DIST)-----|confirmed length|--+
The following options are available to add a hem to a sheet metal
part.
-
:HEM_EDGE
- specifies the edge where to add the hem.
-
:HEM_LENGTH
- specifies the overall length of the hem.
-
:HEM_PROCESS
- specifies the bend process to use.
-
:HEM_DIST
- specifies the distance between the added hem
and the sheet metal part.
Use this action when designing sheet metal parts with PE/Sheet Metal.
SHA_ADD_LIP terminate action
SHA_ADD_SHEET_BY_OUTLINE terminate action
SHA_ADD_SHEET_BY_POLYLINE terminate action
SHA_OFFSET terminate action