Table of Contents
MoldBase Tutorial
- Getting Started - Lesson 1
- The Plastic Part
- The Cavity Insert
- The Core Insert
- The Slide Mechanism
- The Side Core Inserts
- Initial Mold Base
- Mold coordinate system Initialization
- Mold Initialization
- Mold Plates Rules
- Create the Mold Base.
- Inserts Pockets.
- Add Core and Cavity Inserts Pockets.
- Create Side Core pockets
- Creating Standard Components
- Create Screws
- Create a Trimmed Ejector pin.
- Create an Angle Pin.
- Bill of Materials
- CNC Output
- Collision Checking
- Editing Tools
- Modify Component Position.
- Modify Component Parameters
- Delete Components
- Edit Mold Size
- Multi Inserts - Lesson2
- Mold Base
- Initial Mold Base
- Mold coordinate system Initialization.
- Mold Initialization
- Create the Mold Base.
- Core Inserts Pockets.
- Add screws
- Non Standard Mold Bases - Lessons
- Based on a Standard Mold Base - Lesson 3
- Add Stripper Plate.
- Add Raiser Plates
- Add an Ejector Retainer Plate.
- Add an Ejector Plate.
- Based on an OneSpace Designer assembly - Lesson 4
- Add Leader Pins.
- Add Connecting Screws.
- Fix the connecting device to the plates.
- User Components
- Description
- The Mold Base
- Adding hot runner nozzles
- Editing User Component
- Heat Exchange - Lesson 5
- Concept Design
- Pipe Cycle
- Modify Pipe
- Add Components
- Solid Pipe
- Recalculate - Lesson 6
- Return Pins
- Sleeves
- Mobile Side Screws
- Ejector trim D=8
- Ejector trim D=8
- Ejector trim D=2
- Plate 6 and 7 screws
- Add Plate Recalculated
- Manual Recalculated