This tool allows you to check whether a mirror operation can be replaced by a reposition operation or not.
Enter into command line
(load "mirror_repos_check")
Or add this line to your customization file.
Loading this file will create a button in the toolbox.
The button Part allows you to select a 3D part. Click Next or OK to check whether the mirror operation for the selected part can be replaced by a reposition operation or not. The result is shown in the display box. The same check is used in the "Mirror Part" dialog when the option Check for symmetric parts is turned on. The optional parameter Check Acc can be used to specify an accuracy which is used for the check instead of the geometric resolution of the part.
© 2024 Parametric
Technology GmbH (a subsidiary of PTC Inc.), All Rights Reserved |