CoCreate OneSpace Designer - Commands Reference Manual

MIRROR_3D terminate action

MIRROR_3D mirrors specified parts about a defined plane, within the active viewport.

Syntax


--->(MIRROR_3D)--+------------------------<-----------------------+
                 |                                                |
                 v                                                |
                 |                                                |
                 +------->-------+                                |
                 |               |                                |
                 |               |                                |
                 +---(:PARTS)----+-----+---|part(s)|----->--------+---->
                 |                     |                          |
                 +----------<----------+                          |
                 |                                                |
                 |                                                |
                 +---(:MIRROR_PLANE)---+---|MEASURE_AXIS_3D_SA|---+
                 |                     |                          |
                 +----------<----------+                          |
                 |                                                |
                 |                                                |
                 +---(:DO_IT)------------------>------------------+

Options

The following options are available to mirror your part.

:PARTS - specifies the part(s) to be mirrored.
:MIRROR_PLANE - specifies the mirror plane's normal, and position. The MEASURE_AXIS_3D_SA subaction is used to define the plane.
:DO_IT - accepts the settings and performs the operation.

When to use

Use this action to mirror any part(s) in the active viewport.

Although the order in which you enter your options is not important, this action cannot be performed without the definition of the part(s) to be mirrored, and the plane to be mirrored about.

Example

The following parameter sequence chooses whether or not to keep the original, and the mirror plane.

MIRROR_3D [specify part(s)] :MIRROR_PLANE [specify axis] :DO_IT

The part is modified.

The following parameter sequence creates four copies of an existing part.

MIRROR_3D [specify part(s)] :HORIZONTAL 72,54 :REPEAT_FACTOR 1 :KEEP :ON