Creo™ Schematics 4.0 Help Center > Design Basics > Working with an Internal Catalog > Fibers > To Set Fiber Crossover Styles
  
To Set Fiber Crossover Styles
1. Click Design > Design Properties. The Design Properties dialog box opens.
2. Click Fiber Gap Details. The Fiber Crossing Geometry Selector dialog box opens.
3. Under Automatic style, click one of the following options to set the crossover style:
◦ —Sets horizontal gaps for horizontal fibers.
◦ —Sets horizontal hoops for horizontal fibers.
◦ —Sets gaps for vertical fibers.
◦ —Sets right vertical hoops for vertical fibers.
◦ —Sets left vertical hoops for vertical fibers.
4. Under Manual style, click one of the following options to set the crossover style:
◦ —Sets a gap.
◦ —Sets a hoop.
5. Under Grid spacing ratio, specify the crossover gap to grid spacing ratio.
6. Under Deletion, select the Always delete manually created crossing geometry check box to delete all manually inserted crossovers from the design when you click Remove. (Click Diagramming and then click Remove.)
7. Click OK. The Fiber Crossing Geometry Selector dialog box closes.
8. Click OK.