To Set an Autoport Shape for a Fiber
1. In the Catalog Explorer, select Fibers from the Type box.
2. Select the shape for which to set an autoport shape.
|
|
You can set an autoportshape only for a fiber of the Block diagram type.
|
3. Click
to the right of the
Fibershapes list. The
Fiber Properties dialog box opens.
4. To use the autoport shape defined for the open diagram type, on the Branch tab, click Use Default Autoport.
5. To set a different autoport shape, click Set Autoport. The Select Autoport Shape dialog box opens.
6. Select the required shape in the list and click OK. The Select Autoport Shape dialog box closes and the name of the selected shape appears in the Set Autoport box.
7. Click OK.
