Creo™ Schematics 4.0 Help Center > Design Basics > Working with an Internal Catalog > Highways > To Add a Fiber or Cable to a Highway
  
To Add a Fiber or Cable to a Highway
1. Select a highway in the design.
2. Right-click and choose Add fibers or click Diagramming, then click the arrow next to Edit Highway, and click Add fibers. You are prompted to select a fiber.
3. Click the fiber where you want to insert the break to the highway.
4. When the fiber is part of a cable the Include other conductors dialog box opens. Click Yes to route all fibers in the cable through the highway.
5. Click the fiber again where you want to break it from the highway.