About the Separate Surface Region Feature User Interface
The Separate Surface Region tab consists of commands, tabs, and shortcut menus. Click > > to open the Separate Surface Region tab.
Commands
• Selection Method
◦ Manual Selection—Selects contours to separate to a new surface.
◦ Auto-detect—Selects contours to keep in the source surface. All other contours will be separated into a new surface.
• References
◦ Surface to separate collector—Displays a surface from which to separate surface regions.
◦ Contours collector—Displays contours to separate to a new surface when
Manual Selection is selected.
Tabs
• Placement
◦ Surface to separate collector—Displays a surface from which to separate surface regions.
◦ Contours collector—Displays contours to separate to a new surface when
Manual Selection is selected.
◦ Contours to keep collector—Displays contours to keep in the source surface when
Auto-detect is selected. All other contours will be separated into a new surface.
• Options
◦ Create new surface
▪ For each selected contour separately—Creates a separate surface for each selected contour.
▪ For all selected contours together—Creates one single surface for all the selected contours.
• Properties
◦ Name box—Sets a name for the feature.
◦ —Displays detailed feature information.
Shortcut Menus
Right-click the graphics window to access shortcut menu commands.
• Surface to Separate—Activates the Surface to separate collector.
• Contours—Activates the
Contours collector for
Manual Selection.
• Contours to keep—Activates the
Contours to keep collector for
Auto-detect.
• Clear—Clears the active collector.
• Manual Selection—Activates
Manual Selection contour selection.
• Auto-detect—Activates
Auto-detect contour selection.