Power Inverter without Heat Transfer: Overview

Creo Tutorials > Creo Tutorials > Creo Flow Analysis Tutorials > Beginners Tutorials > Creo Flow Analysis Beginners Tutorials > Tutorial 1 - Power Inverter without Heat Transfer > Power Inverter without Heat Transfer: Overview

The objective of this simulation is to study the air flow inside a power inverter. Air enters the inlet at a specified pressure of 101325 Pa and exits with a volumetric flux of 0.001 m3/s. You can see the geometry and conditions for the simulation in the figure below:

1. Inlet

2. Inflow Direction

3. Outflow Direction

4. Outlet

Air Density = 1.1614 kg/m3

Air Viscosity = 1.846e-05 Pa.s

The exercises in the Flow Analysis simulation are:

1. Power Inverter without Heat Transfer: Exercise 1—Extracting the Fluid Domain

2. Power Inverter without Heat Transfer: Exercise 2—Preparing the Mesh

3. Power Inverter without Heat Transfer: Exercise 3—Defining Physics Modules

4. Power Inverter without Heat Transfer: Exercise 4—Assigning Boundary Conditions

5. Power Inverter without Heat Transfer: Exercise 5—Creating a Monitoring Point

6. Power Inverter without Heat Transfer: Exercise 6—Performing the Simulation

7. Power Inverter without Heat Transfer: Exercise 7—Analyzing Results