To Redefine Relief for an Attached Flat Wall
When multiple flat walls are added in the same feature, you redefine reliefs for all walls.
1. Select an attached flat wall from the Model Tree or the graphics window. Right-click and choose 
from the shortcut menu. The Flat tab opens.
from the shortcut menu. The Flat tab opens.2. Click Relief. The Relief tab opens.
3. Select a relief type to apply to both sides of the wall. For a Stretch relief, set the angle value and width. For Rectangular and Obround reliefs, set values for the depth, length, and width. The relief dynamically updates.
4. To define a relief type for each side of the wall, click Define each side separately and select a side and a type of relief.
5. Click 
.
.