To Redefine Relief for a Flange Wall
1. Select a flange wall from the Model Tree or the graphics window. Right-click and choose from the shortcut menu. The Flange tab opens.
2. Click Relief. The Relief tab opens.
3. To change the bend relief, click Bend Relief.
4. To apply relief to both sides of the wall, select a type. For a Stretch relief, set the angle value and width. For Rectangular and Obround reliefs, set values for the depth, length, and width.
5. To define a relief type for each side of the wall, click Define each side separately and select a side and a type of relief.
6. To apply corner relief, click Corner Relief. Select a new type of relief to apply.
7. Click .