Dowel Pin Configuration Options
PIN_DIGITS
Default is 3.
Set the number of digits for the Dowel Pin Fastener Definition dialog box.
PIN_SUPPRESS_NEW
Default is no.
yes—Suppress dowel pin connections after assembling.
no—Do not suppress dowel pin connections after assembling.
PIN_COLOR_HOLE
Color of the through hole.
PIN_COLOR_CB
Color of the cylindrical counterbore surface.
PIN_COLOR_PLANE
Color of the counterbore plane.
COLOR_PARTPIN
Color of the dowel pins.
PIN_THREAD_SERIES_COUNTERBORE
Hole chart for counterbores.
PIN_THREAD_SERIES_THRU
Hole chart for through holes.
PIN_THREAD_SERIES_BLIND
Hole chart for blind holes.
PIN_REPLACE_PARAM_BY_DIM_IN_NOTE
Default is no.
yes—Replace the parameter by the dimension symbol.
no—Do not modify the hole note.
PIN_REPLACE_DIAMETER
Default is no.
yes—Do not modify &DIAMETER [.x].
no—Replace &DIAMETER[.x] with the dimension symbol.
PIN_REPLACE_DRILL_DEPTH
Default is no.
yes—Do not modify &DRILL_DEPTH[.x].
no—Replace &DRILL_DEPTH[.x] with the dimension symbol.
PIN_REPLACE_CBORE_DIAMETER
Default is no.
yes—Do not modify &CBORE_DIAMETER[.x].
no—Replace &CBORE_DIAMETER[.x] with the dimension symbol.
PIN_REPLACE_CBORE_DEPTH
Default is no.
yes—Do not modify &CBORE_DEPTH[.x].
no—Replace &CBORE_DEPTH[.x] with the dimension symbol.
PIN_DIAMETER_FOR_HOLECHART
Default is DN.
DN—Use column DN from file ifx_pin_data.cfg to get the hole chart.
NOM—Use column NOM from file ifx_pin_data.cfg to get the hole chart.