General Configuration Options
USE_EXTERNAL_REFERENCES
Default is yes.
yes—All screw and dowel pin hole features are placed on the selected point/axis.
no—All screw and dowel pin hole features are placed without external references.
SELECT_POS_REFS
Default is 2.
0—Use a UDF as position reference for each surface.
1—For each surface you are prompted for two position references.
2—Search for two surfaces, which are normal to the surface.
COLOR_STDPARTS
Default is 1.
0—Do not color standard parts.
1—Color new standard parts.
2—Color standard parts.
COLOR_HOLES
Default is 1.
0—Do not change the color of the hole surfaces.
1—Transparency of hole surfaces is set to opaque (0.00).
2—Change color of hole surfaces as defined.
PATH_ABS_LIBRARY
Complete path to the component library root directory.
PATH_ABS_ARCHIVES
Complete path to the component archive.
USE_ARCHIVES
Default is no.
yes—Use the archive. Save new components to PATH_ABS_ARCHIVES.
no—Do not use the archive.
ENTER_DISTANCE_VALUES
Default is no.
yes—After placing a screw or a dowel pin using the pointer, enter the distance values.
no—Do not enter the distance values.
LAYERNAME_DATUM
Layer name for Datums. Leave blank for no layer.
LAYERNAME_HOLE_NOTE
Layer name for Hole Notes. Leave blank for no layer.
PROVIDE_LAST_REFERENCES
Default is yes.
yes—Provide the last selected references, while reassembling. Middle-click to accept the references.
no—Select all references while reassembling.
FAMTAB_CHECK_LENGTH
Default is no.
yes—Check if at least one length exists for the selected diameter.
no—Do not check the length.
USE_NEW_LIBRARY_STRUCTURE
Default is no.
yes—Use the new library structure.
no—Use the old library structure.
READ_LIBRARY_DATA_ONCE_ONLY
Default is yes.
yes—Read library data once only. Reuse data on subsequent call.
no—Read library data every time. Recommended for testing only.
FOLDER_FOR_CATALOGS
Name of the folder for the IFX catalogs.
PREFIX_FOR_CATALOG_FILES
Prefix for the catalog file names. Can be empty.
FOLDER_FOR_FASTENER_DATA
Name of the folder for the IFX fastener data.
HOLE_VISIBILITY
Default is PRT.
SELECT—Select hole visibility.
PRT—Create hole in part.
ASM—Create hole in assembly.
NO—Do not create a hole.
PATTERN_OPTION
Default is DEFAULT.
DEFAULT—Use the default IFXpattern option.
REMEMBER—Remember the last selected pattern option.
SINGLE—Select ‘Assemble single instance’.
PATTERN—Select ‘Pattern fastener’.
ALL_INSTANCES—Select ‘Assemble fastener on all instances’.
ALL_INSTANCES_AND_PATTERN—Select ‘Assemble fastener on all instances and pattern it’.
INCREMENT_DIAMETER_MM
Default is 0.5.
Enter the mm increment value of the spin box for diameter values.
INCREMENT_DIAMETER_INCH
Default is 0.03125.
Enter the inch increment value of the spin box for diameter values.
INCREMENT_DEPTH_MM
Default is 0.5.
Enter the mm increment value of the spin box for depth values.
INCREMENT_DEPTH_INCH
Default is 0.03125.
Enter the inch increment value of the spin box for depth values.