Manufacturing > Manufacturing > Glossary > List of Manufacturing Parameters
List of Manufacturing Parameters
The list of parameters is alphabetically arranged. Click a parameter name to see its description.
4X_LEAD_ANGLE (Milling)
4X_TILT_ANGLE (Milling)
ADJUST_PITCH (Milling)
ALLOW_ENTRY_OUTSIDE(High Speed Milling)
ALLOW_TOOL_OUSIDE_WORKPIECE (High Speed Milling)
ALT_OSETNO_VAL (Turning)
APPR_EXIT_EXT (Milling)
APPR_EXIT_PATH (Milling)
APPROACH_FEED (Milling)
APPROACH_MOVE (Wire EDM)
APPROACH_TYPE (Milling)
ARC_FEED (Milling)
ARC_FEED (Wire EDM)
ARC_FEED_RADIUS (Milling)
ATTACH_WIDTH (Wire EDM)
AUTO_CORNER_TYPE (Wire EDM)
AXIS_SHIFT (Milling)
AXIS_SHIFT (High Speed Milling)
BACK_BORE_CLEARANCE (Holemaking)
BOTTOM_STOCK_ALLOW (High Speed Milling)
BREAKOUT_DISTANCE (Holemaking)
CHAMFER_DIM (Turning)
CHK_SRF_STOCK_ALLOW (Holemaking)
CIRC_INTERPOLATION (Common NC Sequence)
CL_DIST (Wire EDM)
CL_OUTPUT_MODE (Wire EDM)
CLEAR_BY (Pencil Tracing)
CLEAR_DIST (Holemaking)
CLEAR_DIST (Milling)
CLEAR_DIST (Turning)
CLEAR_DIST (High Speed Milling)
CLEARANCE_EDGE (Milling)
CLEARANCE_OFFSET (Holemaking)
CLOSED_AREA_ENTRY (Roughing and Reroughing)
CLOSED_AREA_ENTRY(High Speed Milling)
CLOSED_AREA_EXIT (Roughing and Reroughing)
CLOSED_AREA_SCAN (Roughing and Reroughing)
CONCAVE_RADIUS (Turning)
CONCAVE_RADIUS (Wire EDM)
CONNECT_OPTIMIZE (Trajectory Milling)
CONNECT_OVERLAP (Turning)
CONNECTION_TYPE (Milling)
CONTACT_ANG_HIGH (Pencil Tracing)
CONTACT_ANG_LOW (Pencil Tracing)
CONVEX_RADIUS (Turning)
CONVEX_RADIUS (Wire EDM)
COOLANT_OPTION (Common NC Sequence)
COOLANT_PRESSURE (Common NC Sequence)
COORDINATE_OUTPUT (Common NC Sequence)
CORN_ANG_LIMIT (Rest Finishing)
CORN_CONN_TYPE (Rest Finishing)
CORNER_ANGLE (Wire EDM)
CORNER_CLEANUP (Milling)
CORNER_LENGTH (Wire EDM)
CORNER_OFFSET (Milling)
CORNER_PASSES (Wire EDM)
CORNER_ROUND_RADIUS (Roughing and Reroughing)
CORNER_SLOWDOWN (Milling)
CORNER_SLOWDOWN (Roughing and Reroughing)
CURL_DOWN_RADIUS (Pencil Tracing)
CURL_OVER_RADIUS (Pencil Tracing)
CUT_ANGLE (Milling)
CUT_ANGLE (Turning)
CUT_ANGLE (High Speed Milling)
CUT_DIRECTION (Holemaking)
CUT_DIRECTION (Milling)
CUT_DIRECTION (Turning)
CUT_ENTRY_EXT (Milling)
CUT_EXIT_EXT (Milling)
CUT_FEED (Common NC Sequence)
CUT_OFFSET (Turning)
CUT_STYLE (Thread Milling)
CUT_TYPE (Milling)
CUT_TYPE (High Speed Milling)
CUT_UNITS (Common NC Sequence)
CUTCOM (Milling)
CUTCOM (Turning)
CUTCOM_LOC_APPR (Milling)
CUTCOM_LOC_APPR (Wire EDM)
CUTCOM_LOC_EXIT (Milling)
CUTCOM_LOC_EXIT (Wire EDM)
CUTCOM_MOVE (Wire EDM)
CUTCOM_REG_INCR (Wire EDM)
CUTCOM_REG_START (Wire EDM)
CUTCOM_REGISTER (Milling)
CUTCOM_REGISTER (Turning)
CUTLINE_TYPE (Milling)
CYCLE_FORMAT (Holemaking)
CYCLE_OUTPUT (Holemaking)
DELAY (Holemaking)
DELAY (Turning)
DELAY_UNITS (Holemaking)
DETACH_STOP_DIST (Wire EDM)
DETECT_THICKER_THAN(High Speed Milling)
DETECT_THICKER_THAN (High Speed Milling)
END_HEIGHT (High Speed Milling)
END_MOTION (Common NC Sequence)
END_OVERTRAVEL (Milling)
END_OVERTRAVEL (Turning)
END_OVERTRAVEL (Wire EDM)
END_STEP_DEPTH (Turning)
END_STOP_CONDITION (Common NC Sequence)
ENTRY_ANGLE (Milling)
ENTRY_ANGLE (Turning)
ENTRY_EDGE (Milling)
EXIT_ANGLE (Milling)
EXIT_ANGLE (Turning)
EXIT_DISTANCE (Milling)
EXIT_DISTANCE (Turning)
EXIT_DISTANCE (Wire EDM)
EXIT_FEED (Milling)
EXIT_TYPE (Milling)
FILTER_TYPE (High Speed Milling)
FINAL_EXIT_EXT (Milling)
FINISH_CUT_FEED (Thread Milling)
FINISH_OPTION (Finishing)
FINISH_OPTION (High Speed Milling)
FINISH_SPINDLE_FEED (Thread Milling)
FINISH_STOCK_ALLOW (Finishing)
FINISH_STOCK_ALLOW (High Speed Milling)
FINISHING_ORDER (Finishing)
FIRST_FINCUT_OFFSET (2-Axis Trajectory Milling)
FIRST_FINPASS_OFFSET (2-Axis Trajectory Milling)
FIXT_OFFSET_REG (Common NC Sequence)
FLAT_AREA (Finishing)
FLOAT_TAP_FACTOR (Holemaking)
FLUSH_REG_DETACH (Wire EDM)
FLUSH_REG_INCR (Wire EDM)
FLUSH_REG_START (Wire EDM)
FREE_FEED (Common NC Sequence)
FULL_RETRACT_DEPTH (Holemaking)
GENRTR_APPROACH (Wire EDM)
GENRTR_DETACH (Wire EDM)
GENRTR_FINISH (Wire EDM)
GENRTR_REG_INCR (Wire EDM)
GENRTR_ROUGH (Wire EDM)
GO_HOME_REGISTER (Common NC Sequence)
GROOVE_DEPTH (Milling)
HELICAL_BOUNDS (Milling)
HELICAL_DIAMETER_PERC(High Speed Milling)
HELICAL PITCH (Milling)
HOLDER_CLEARANCE (High Speed Milling)
HOLDER_DIAMETER (Milling)
HOLDER_LENGTH (Milling)
HORIZONTAL_OFFSET (Pencil Tracing)
IGNORE_RULINGS (Milling)
INFEED_ANGLE (Turning)
INITIAL_DIAMETER (Thread Milling)
INSIDE_TOLERANCE (Finishing)
INSIDE_TOLERANCE (Roughing and Reroughing)
INTERMEDIATE_SLICE_ADJUST (High Speed Milling)
INVERSE_FEED (Milling)
JOG_DIST (Holemaking)
LACE_OPTION (Milling)
LAST_FINCUT_OFFSET (2-Axis Trajectory Milling)
LAST_FINPASS_OFFSET (2-Axis Trajectory Milling)
LEAD_ANGLE (Milling)
LEAD_IN (Milling)
LEAD_IN (Wire EDM)
LEAD_OUT (Milling)
LEAD_OUT (Wire EDM)
LEAD_RADIUS (Milling)
LEAD_RADIUS (Turning)
LEAD_RADIUS (Wire EDM)
LEAD_RADIUS (High Speed Milling)
LIMIT_PASSES (Pencil Tracing)
LINTOL (Common NC Sequence)
MACH_ID (Common NC Sequence)
MACH_NAME (Common NC Sequence)
MACHINE_FLATLANDS (High Speed Milling)
MACHINING_ORDER (Milling)
MAX_CORNER_ANGLE (Corner Finishing)
MAX_ARC_FEED (Milling)
MAX_CUT_DEPTH (Corner Finishing)
MAX_SEGMENT_LENGTH (Common NC Sequence)
MAX_SPIKE_ANGLE (Pencil Tracing)
MAX_SPINDLE_RPM (Holemaking)
MAX_SPINDLE_RPM (Milling)
MAX_SPINDLE_RPM (Turning)
MAX_STEP_DEPTH (Roughing and Reroughing)
MAX_STEP_DEPTH (High Speed Milling)
MAX_TRIM_LENGTH (Pencil Tracing)
MFG_EXTRACTION_DATE (Manufacturing Assembly)
MFG_EXTRACTION_PROCESS_TEMPLATE (Manufacturing Assembly)
MFG_NUM_OF_REF_MODELS (Manufacturing Assembly)
MFG_REF_MODEL_NAME_X (Manufacturing Assembly)
MFG_REF_MODEL_VERSION_X (Manufacturing Assembly)
MIN_PASS_LENGTH (Pencil Tracing)
MIN_REST_AREA (Corner Finishing)
MIN_RETRACT_DISTANCE (Pencil Tracing)
MIN_STEP_DEPTH (Milling)
MIN_STEP_DEPTH (Roughing and Reroughing)
MIN_STEP_DEPTH (Turning)
MINIMUM_WIDTH (High Speed Milling)
MULTI_PENCIL_PASSES(High Speed Milling)
NCL_FILE (Common NC Sequence)
NORMAL_LEAD_STEP (Wire EDM)
NUM_PROF_PASSES (Milling)
NUM_PROF_PASSES (Thread Milling)
NUM_PROF_PASSES (Turning)
NUM_ROUGH_PASSES (Thread Milling)
NUM_SPRING_PASSES (Thread Milling)
NUMBER_CUTS (Milling)
NUMBER_CUTS (Turning)
NUMBER_FIRST_FINCUTS (2-Axis Trajectory Milling)
NUMBER_FIRST_FINPASSES (2-Axis Trajectory Milling)
NUMBER_INTERMEDIATE_SLICES(High Speed Milling)
NUMBER_LAST_FINCUTS (2-Axis Trajectory Milling)
NUMBER_LAST_FINPASSES (2-Axis Trajectory Milling)
NUMBER_OF_ARC_PTS (Common NC Sequence)
NUMBER_PASSES (Milling)
NUMBER_PASSES (Turning)
NUMBER_PASSES (Pencil Tracing)
NUMBER_SLOWDOWN_STEPS (Roughing and Reroughing)
NUMBER_STARTS (Turning)
ONE_PASS_OFFSET (Milling)
OPEN_AREA_SCAN (Roughing and Reroughing)
OPTIMAL_ANGLE (High Speed Milling)
ORIENT_ANGLE (Holemaking)
ORIENT_SCAN_TYPE (Holemaking)
OUTPUT_3DNURBS (Common NC Sequence)
OUTPUT_POINT (Turning)
OUTSIDE_TOLERANCE (Finishing)
OUTSIDE_TOLERANCE (Roughing and Reroughing)
OVERLAP_ANGLE (Finishing)
OVERTHICKNESS (Pencil Tracing)
PECK_DEPTH (Holemaking)
PECK_DEPTH (Turning)
PERCENT_DEPTH (Turning)
PERCENT_LENGTH (2-Axis Trajectory Milling)
PLUNGE_ANGLE (Turning)
PLUNGE_DISTANCE (Finishing)
PLUNGE_FEED (Common NC Sequence)
PLUNGE_PREVIOUS (Milling)
PLUNGE_STEP (Milling)
PLUNGE_UNITS (Common NC Sequence)
POCKET_EXTEND (Milling)
POINT_DISTRIBUTION (Common NC Sequence)
POST_MACHINING_FILE (Common NC Sequence)
PRE_MACHINING_FILE (Common NC Sequence)
PREVIOUS_BOTTOM_STOCK_ALLOW (High Speed Milling)
PREVIOUS_ROUGH_STOCK_ALLOW (High Speed Milling)
PROF_INCREMENT (Milling)
PROF_INCREMENT (Thread Milling)
PROF_INCREMENT (Turning)
PROF_INCREMENT (Wire EDM)
PULLOUT_ANGLE (Turning)
PULLOUT_DIST (Holemaking)
PULLOUT_DIST (Milling)
PULLOUT_DIST (Turning)
PULLOUT_DIST (High Speed Milling)
RAMP_ANGLE (Milling)
RAMP_ANGLE (High Speed Milling)
RAMP_EXTENSION (Pencil Tracing)
RAMP_FEED (Milling)
RANGE_NUMBER (Holemaking)
RANGE_NUMBER (Milling)
RANGE_NUMBER (Turning)
RAPTO_DIST (Holemaking)
REGISTER_TABLE (Wire EDM)
REMOVE_CORNER_PEGS (High Speed Milling)
REMOVE_SPIKES (Pencil Tracing)
REST_AREA_OFFSET (Corner Finishing)
REST_AREA_OFFSET(High Speed Milling)
RESTPASS_ENABLE (Pencil Tracing)
RETRACT_FEED (Common NC Sequence)
RETRACT_FEED (Holemaking Sequence)
RETRACT_OPTION (Milling)
RETRACT_OPTION (Roughing and Reroughing)
ROUGH_SPINDLE_FEED (Thread Milling)
RETRACT_OPTION (Pencil Tracing)
RETRACT_RADIUS (Milling)
RETRACT_RATIO (Turning)
RETRACT_UNITS (Common NC Sequence)
RETURN_SPINDLE_SPEED (Holemaking Sequence)
RETURN_TO_START (Wire EDM)
REVERSE_DIST (Wire EDM)
REVERSE_LINK_DIRECTION (Pencil Tracing)
ROUGH_CUT_SPEED (Thread Milling)
ROUGH_INCREMENT (Thread Milling)
ROUGH_OPTION (Milling)
ROUGH_OPTION (Turning)
ROUGH_OPTION (High Speed Milling)
ROUGH_SCALLOP (Roughing and Reroughing)
ROUGH_SCALLOP_CONTROL (Roughing and Reroughing)
ROUGH_STOCK_ALLOW(High Speed Milling)
SCALLOP_HGT (Milling)
SCALLOP_HGT (High Speed Milling)
SCAN_TYPE (Holemaking)
SCAN_TYPE (Milling)
SCAN_TYPE (Turning)
SCAN_TYPE (High Speed Milling)
SHALLOW_AREA_SCAN (Corner Finishing)
SHALLOW_AREA_SCAN (Finishing)
SIDEWALL_OFFSET (Turning)
SLICE_PATH_SCAN (Milling)
SLICE_PATH_SCAN (High Speed Milling)
SLOPE_ANGLE (Finishing)
SLOPE_ANGLE (Milling)
SLOWDOWN_LENGTH (Milling)
SLOWDOWN_LENGTH (Roughing and Reroughing)
SLOWDOWN_PERCENT (Roughing and Reroughing)
SMALL_LINKS (High Speed Milling)
SMOOTH_RADIUS (Milling)
SMOOTH_RADIUS (Roughing and Reroughing)
SMOOTH_SHARP_CORNERS (Roughing and Reroughing)
SPARK_ALLOW (Wire EDM)
SPEED_CONTROL (Holemaking)
SPEED_CONTROL (Milling)
SPEED_CONTROL (Turning)
SPIKE_ALLOWANCE (Pencil Tracing)
SPINDLE_RANGE (Holemaking)
SPINDLE_RANGE (Milling)
SPINDLE_RANGE (Turning)
SPINDLE_SENSE (Holemaking)
SPINDLE_SENSE (Milling)
SPINDLE_SENSE (Turning)
SPINDLE_SPEED (Holemaking)
SPINDLE_SPEED (Milling)
SPINDLE_SPEED (Turning)
SPINDLE_STATUS (Holemaking)
SPIRAL_CONN_TYPE (Rest Finishing)
SPIRAL_SCAN_DIRECTION(High Speed Milling)
START_HEIGHT (High Speed Milling)
START_MOTION (Common NC Sequence)
STEEP_AREA_SCAN (Corner Finishing)
STEEP_REGION_CUT_TYPE (Rest Finishing)
STEEP_STEP_OVER (Finishing)
STEEP_STEP_OVER(High Speed Milling)
STEEP_TO_FLAT_ANGLE (Rest Finishing)
STEP_DEPTH (Milling)
STEP_DEPTH (Turning)
STEP_OVER (Milling)
STEP_OVER (Turning)
STEP_OVER (Wire EDM)
STEP_OVER (High Speed Milling)
STEPOVER_ADJUST (Milling)
STEPOVER_ADJUST (Turning)
STOCK_ALLOW (Turning)
STOCK_ALLOW (Wire EDM)
STOP_DIST (Wire EDM)
SURFACE_CLEANUP (Milling)
SURFACE_RAMP_ANGLE (Pencil Tracing)
SURFACE_RAMP_OPTION (Pencil Tracing)
SWISS_TURN (Turning)
TAPER_ANGLE (Wire EDM)
THREAD_DEPTH (Turning)
THREAD_DIAMETER (Thread Milling)
THREAD_FEED (Holemaking)
THREAD_FEED (Milling)
THREAD_FEED (Turning)
THREAD_FEED_UNITS (Holemaking)
THRESHOLD_VALUE_PERCENT (High Speed Milling)
TILT_ANGLE (Milling)
TIP_CONTROL_POINT (Holemaking)
TLCHG_TIP_NUMBER (Holemaking)
TOLERANCE (Common NC Sequence)
TOLERANCE(High Speed Milling)
TOOL_CLEARANCE (Turning)
TOOL_OVERLAP (Milling)
TOOL_OVERLAP (Wire EDM)
TRAVERSE_FEED (Milling)
TRIM_PASS_OPTION (Pencil Tracing)
TRIM_TOOLPATH_ON_HOLDER (High Speed Milling)
USE_DEGOUGE_ADDONS (Conventional Milling)
WALL_FINISH_CUT (2-Axis Trajectory Milling)
WALL_TOLERANCE (Milling)
Z_STOCK_ALLOW (Turning)