To Edit the Pin Sequence of a Parametric Connector
1. Select a parametric connector to modify.
2. Click > .
or
Select the parametric connector to modify and right-click to select Properties from the shortcut menu. The EDIT CONN and CONN VIEW menus appear.
3. Click Pin Sequence from the EDIT CONN menu.
4. Select one of the following commands at the bottom of the PIN SEQUENCE menu before you select the editing method:
◦ Fix Wires—Does not change the location of wires as you modify the pin sequence.
◦ Adjust Wires—Reconnects wires according to the new pin sequence.
5. Select one of the following commands from the PIN SEQUENCE menu to edit the pin sequence.
◦ Default—Restores the default pin sequence.
◦ Enter Seq—Displays the current pin sequence in a message window. (Number names cannot exceed the value of the NUM_OF_PINS parameter.)
◦ Select—Clicks a node to change its number.
◦ Switch—Selects two nodes to switch numbers.
◦ Reverse—Reverses the current numbering sequence for the connector.
6. When finished, click Done from the EDIT CONN menu.