Creo Tutorials > Creo Flow Analysis Tutorials > Beginners Tutorials > Creo Flow Analysis Beginners Tutorials > Tutorial 1 - Power Inverter without Heat Transfer > Power Inverter without Heat Transfer: Overview
  
Power Inverter without Heat Transfer: Overview
The objective of this simulation is to study the air flow inside a power inverter. Air enters the inlet at a specified pressure of 101325 Pa and exits with a volumetric flux of 0.001 m3/s. You can see the geometry and conditions for the simulation in the figure below:
1. Inlet
2. Inflow Direction
3. Outflow Direction
4. Outlet
Air Density = 1.1614 kg/m3
Air Viscosity = 1.846e-05 Pa.s
The exercises in the Flow Analysis simulation are:
1. Power Inverter without Heat Transfer: Exercise 1—Extracting the Fluid Domain
2. Power Inverter without Heat Transfer: Exercise 2—Preparing the Mesh
3. Power Inverter without Heat Transfer: Exercise 3—Defining Physics Modules
4. Power Inverter without Heat Transfer: Exercise 4—Assigning Boundary Conditions
5. Power Inverter without Heat Transfer: Exercise 5—Creating a Monitoring Point
6. Power Inverter without Heat Transfer: Exercise 6—Performing the Simulation
7. Power Inverter without Heat Transfer: Exercise 7—Analyzing Results