Creo Tutorials > Creo Flow Analysis Tutorials > Beginners Tutorials > Creo Flow Analysis Beginners Tutorials > Tutorial 1 - Power Inverter without Heat Transfer > Power Inverter without Heat Transfer: Exercise 4—Assigning Boundary Conditions
  
Power Inverter without Heat Transfer: Exercise 4—Assigning Boundary Conditions
Specifying Inlet Boundary Conditions
1. Under Boundary Conditions, select BC_1.
2. In the Model tab select the following values for the options listed:
FlowSpecified Pressure Inlet
Pressure—101325 Pa
3. In the Model tab for Streamline set Release Particle to Yes
Specifying Outlet Boundary Conditions
1. Under Boundary Conditions select BC_2.
2. In the Model tab select the following values for the options listed:
FlowSpecified Volumetric Flux
Flow DirectionOutflow
Value—0.001 m3/s
Specifying Volume Conditions
1. To set the fluid, click Materials. The Material Selection dialog box opens. The fluid properties are set automatically when you select a new fluid.
2. For fluid domain POWERINVERTER_1_FLUID select air.