Creo Tutorials > Creo Flow Analysis Tutorials > Advanced Tutorials > Creo Flow Analysis Advanced Tutorials > Tutorial 2 - Cabin Radiation with Convection and Radiation > Cabin Radiation with Convection and Radiation: Overview
  
Cabin Radiation with Convection and Radiation: Overview
This tutorial simulates the solar radiation effect on cabin temperature. The table and chair are at the center of the cabin floor. Solar radiation enters through the window and heats the air inside the cabin. You can see the geometry and conditions for the simulation in the figure below:
1. Inner Wall Exchange Coefficient (h) = 100 W/m2 -k
2. Window Exchange Coefficient (h) = 200 W/m2 -k
3. Parallel Power Source = 500 W/m2
Radiation Parameter
Walls Emissivity = 1
Window = Transparent
The exercises in the Flow Analysis simulation are:
1. Cabin Radiation with Convection and Radiation: Exercise 1—Extracting the Fluid Domain
2. Cabin Radiation with Convection and Radiation: Exercise 2—Defining Physics Modules
3. Cabin Radiation with Convection and Radiation: Exercise 3—Assigning Boundary Conditions
4. Cabin Radiation with Convection and Radiation: Cabin Radiation Exercise 4—Preparing the Mesh
5. Cabin Radiation with Convection and Radiation: Exercise 5—Creating Monitoring Points
6. Cabin Radiation with Convection and Radiation: Exercise 6—Performing the Simulation
7. Cabin Radiation with Convection and Radiation: Exercise 7—Analyzing Results