About the Revolve Tool in Sheetmetal Design
Use the Revolve tool to create a sheet metal wall or surface with revolve geometry. When a revolved wall is not the first wall, use the tool to create a solid cut. First sketch a section of the wall and then revolve it about a sketched axis or any linear geometry located on the sketch plane.
You can redefine a revolved wall as a surface, or a revolved surface as a wall, if the wall is not the first one in a design. You must specify thickness for a first wall. Keep in mind that additional options specific to Sheetmetal Design are available for the Revolve tool.
For more information on the Revolve tool, search the Help Center.
Sketch
|
60°
|
270°
|
Up to Plane
|
|
|
|
|