Create a Section in a Ply View
You can create one or more sections in a ply view. To create sections in the ply view, the parent composite feature must have laminate sections. To learn how to create laminate sections in the composite feature, see Show a Laminate Section.
Create a section in a ply view as follows:
1. In the Drawing View dialog box, select Sections from the list of categories.
2. Select Piles section.
3. Click 
to add a ply section.
to add a ply section.4. Select a laminate section under Name.
5. Select the visibility style under Sectioned Area.
6. To flip the direction of the cross section, click 
.
.7. To control the display of model edges, select one of the following Model edge visibility options:
◦ Total—Displays the model edges behind the section planes as well as the section edges.
 | When you use this option, we recommend that you set the value of show_quilts_in_total_xsecs in Detail Options to yes. |
◦ Area—Displays only section edges.
8. Click OK.
Remove a Ply Section
1. In the Drawing View dialog box, select Sections from the list of categories.
2. Click 
to remove a section or select No section to remove all sections from the ply view.
to remove a section or select No section to remove all sections from the ply view.