Vous pouvez également écrire des informations statistiques dans un fichier texte. Ces informations comprennent, entre autres, une liste des plis, les outils de poinçonnage et d'estampage utilisés et les erreurs qui se sont produites au cours du dépliage. En outre, ce fichier peut être utilisé par d'autres applications pour élaborer des programmes d'évaluation des coûts spécifiques aux utilisateurs. Les statistiques de déplié ne tiennent pas compte des fonctions de type no relief.
Consultez l'exemple suivant :
# FLAT GENERATION STATISTICS SHOP "demoshop" MATERIAL "AA 5052" THICKNESS 1.6000000000000001 BENDS 6 # Total number of bends DIFF_BENDS 3 # Number of different bends HEMS 1 # Total number of 180 degree bends DIFF_HEMS 1 # Number of different 180 degree bends ANON_LENGH 2175.1044 # Length geometry without feature info CMPLX_ELEMS 7 # Number non-straight non-feature elements FLAT_WIDTH 559.9996 # Width of box enclosing the flat FLAT_HEIGHT 253.4943 # Height of box enclosing the flat PART_WIDTH 302.8500 # Width of box enclosing the part PART_HEIGHT 200.0000 # Height of box enclosing the part PART_DEPTH 173.9658 # Depth of box enclosing the part PUNCHES 5 # Total number of punch features DIFF_PUNCHES 2 # Number of different punch features STAMPS 2 # Total number of stamp features DIFF_STAMPS 1 # Number of different stamp features ERROR_CODE 0 # Non zero indicates unfolding problems(s) # PUNCH/STAMP-TOOLS (x-pos, y-pos, angle, direction, info) PUNCH_STAMP 23.6537 -30.3740 -90.00 1.0 "" PUNCH_STAMP 26.5943 -98.2930 -90.00 1.0 "" PUNCH_STAMP -70.1273 41.6966 0.00 1.0 "01158" PUNCH_STAMP -89.0747 21.6966 0.00 1.0 "01158" PUNCH_STAMP -108.0220 1.6966 0.00 1.0 "01158" PUNCH_STAMP -126.9694 -18.3034 0.00 1.0 "01158" PUNCH_STAMP -34.9267 19.4270 0.00 1.0 "02170" # BEND-TOOLS (angle, radius, info) BEND 45.00 0.400 "bend-forming" BEND 90.00 0.400 "bend-forming" BEND 90.00 0.400 "bend-forming" BEND 90.00 0.400 "bend-forming" BEND 180.00 0.625 "hems" BEND 90.00 0.200 "offsets"