Add a pipeline
To create a pipeline,
1. Click
Part Library and then, in the
Pipeline group, click
Create. The
Create pipes dialog box opens.
2. Click OuterDia and type a value for the outer diameter of the pipe.
3. Select the InnerDia check box and type a value for the inner diameter of the pipe.
4. Click Radius and type a value for the pipe bend radius.
5. Click Owner and select the owning assembly.
6. Click Name and type a name for the pipe.
7. Select the Unite To One Part check box to unite all constituents of the pipeline in one part.
8. Under Positioning 3D Copilot, select either XYZ or Diamond as the type of copilot.
9. Click Downgrade and type a value for the down-grade angle of the copilot.
10. Click DownGr[%] and type a value for the down-grade percentage of the copilot.
11. Click Point and specify a start point for the pipe.
12. Click Direction and specify the direction.
13. Click Length and type a value for the length of the pipe.
14. Click Face/Wp and specify a planar face or workplane. The pipe extends to the specified face or workplane.
15. Click ToPoint and specify a point. The pipe extends to the specified point.
16. Click
OK
to complete the operation.