CoCreate OneSpace Designer - Commands Reference Manual

Creates a dual inline package part.

Syntax

    (SDPCB_DIP_MODEL)
        (:PARTNAME)       | part name |
        (:PIN_1)          | 2D position |
        (:PIN_2)          | 2D position |
        (:PARTTYP)        | part type |
        (:PINS)           | number |
        (:PIN_SPAN)       | positive length |
        (:ROW_SPAN)       | positive length |
        (:BODY_WIDTH)     | positive length |
        (:BODY_LENGTH)    | positive length |
        (:BODY_HEIGHT)    | positive length |
        (:LEAD_THICK)     | positive length |
        [ (:MOUNT_CLEAR)  | positive length | ]

Options

• :PARTNAME - specifies a part name.
• :PIN_1 - specifies a 2D position.
• :PIN_2 - specifies a 2D position.
• :PARTTYP - specifies a part type (e.g. "resistor", "capacitor", "dip").
• :PINS - specifies the number of pins.
• :PIN_SPAN - specifies the distance between the pins.
• :ROW_SPAN - specifies the distance between the pin rows.
• :BODY_WIDTH - specifies the width of the part's body.
• :BODY_LENGTH - specifies the length of the part's body.
• :BODY_HEIGHT - specifies the height of the part's body.
• :LEAD_THICK - specifies the thickness of the leads
• [ :MOUNT_CLEAR - specifies the mounting clearance of the part. ]

See also