Part Modeling > Tweak Features > Local Pushes > To Create a Local Push
To Create a Local Push
A local push deforms a surface by pushing or pulling on a circular or rectangular region on the surface.
1. Set the allow_anatomic_features configuration option to yes to make the Local Push command available on the All Commands list.
2. Add the Local Push command to the desired user-defined group on the ribbon.
* For information about customizing the ribbon, see the Related Links.
3. Click Local Push. The Menu Manager opens.
4. To set up the sketching plane, select an option and perform the action:
Plane—Select a plane or planar surface.
Make Datum—Create a datum plane.
5. Sketch the local push boundaries (sketch the section), and click OK.
6. Select the surfaces on which to apply the local push.