Creo Flexible Modeling > Moving Geometry > To Move Geometry Using the Dragger
  
To Move Geometry Using the Dragger
1. Select geometry to move.
2. Click Flexible Modeling > Move > Move using Dragger. The Move tab opens.
3. To move the selected rounds and chamfers that attach the moved geometry to the model, click the References tab and check the Transform selected attachment rounds/chamfers check box. If you do not check this check box, the selected attaching rounds and chamfers are removed and optionally recreated.
4. To set additional attachment and propagation options, right-click and use the shortcut menu or use the Attachment and Options tabs.
 
* When the Attach moved geometry check box is not selected, the resulting geometry is a quilt. The appearance of the original solid surfaces is propagated to both sides of the resulting quilt.
5. To maintain tangency between the moved geometry and neighboring geometry:
a. Click .
 
* If the flex_tan_propagation_default configuration option is set to on, tangency is automatically propagated.
b. If needed, set conditions for neighboring geometric entities using the Conditions tab, the Add condition option, or the shortcut menu.
6. Drag a dragger handle to translate geometry, drag an arc to rotate the geometry.
7. To reposition the dragger, click the Origin box and select a new reference. Use the arrow at the right of the box to remove the reference or open an Information Window.
8. To orient the dragger, click the Orientation box and select an orientation reference. Use the arrow at the right of the box to remove the reference or open an Information Window.
9. To create a copy-move feature, click .
10. Click or middle-click to accept the feature.