You can change the frame type of existing sheets. Another default or predefined frame can be selected (or no frame at all), or you can define non-standard dimensions for the frame.
To change the frame type to a predefined frame,
1. Click Annotation and then, in the Setup group, click the arrow next to Properties.
2. Click Sheet.
Alternatively, select the frame in the Drawing Browser, right-click, and select Frame Properties from the context menu.
The Sheet Properties dialog box opens.
Under Frame, in the Size box, select a frame size. If you select None, Creo Elements/Direct Annotation replaces the frame with a dummy frame.
3. If necessary, specify a different sheet:
◦ In the Sheet box, select the sheet, or
◦ Select the sheet from the Drawing Browser, right-click, and select Apply Selection from the context menu.
4. Click Close to complete the operation.
The new frame type replaces the old frame of the specified sheet.
To change a frame to a non-standard size,
1. Click Annotation and then, in the Setup group, click the arrow next to Properties.
2. Click Sheet.
Alternatively, select the frame in the Drawing Browser, right-click, and select Frame Properties from the context menu.
The Sheet Properties dialog box opens.
3. If necessary, specify a different sheet:
◦ In the Sheet box, select the sheet.
◦ Select the sheet from the Drawing Browser, right-click, and select Apply Selection from the context menu.
4. Select Non Std Size from the Size box in the Frame section. If you select None, Creo Elements/Direct Annotation replaces the frame with a dummy frame.
5. Click Proportional to proportionately set the size in the horizontal and vertical directions.
6. Type or select the dimensions of the frame.
7. Click Close to complete the operation.
8. If required, you can now build up the frame and save it as a defined frame type for later use.
Properties.
Sheet.