Entering IEC TR 62380/RDF 2000 Inductors and Transformers
The following table describes the part parameters required for inductors and transformers when IEC TR 62380 or RDF 2000 is the selected calculation model.
Parameter
Type
Description
Type
Choice List
The type of device. Choices vary by subcategory.
Operating Power
Real (Watts)
The power dissipation of the device in watts, which is normally available in the manufacturer's databook. Be sure to use the actual rated (rather than maximum rated) power dissipation.
Dissipation Surface
Real (dm2)
The dissipation surface area of the device. Common values range from 0.1 to 3.0.
[Derating Parameters]
---
For more information, see Derating Parameters.