Parameter
|
Type
|
Description
|
---|---|---|
Foreign
|
Checkbox [Parts Count also]
|
Indicates whether the device is made in China. If this checkbox is selected, the failure rate of the part is calculated based on Appendix A for the 299C Parts Count or Parts Stress model chosen.
|
Type
|
Choice List [Parts Count also]
|
Required only for the following subcategories: Detector, Isolator, Emitter and Other, Optical Module or Device.
The type of device. Choices include LED, Light Sensitive Diode, and more.
|
Quality Level
|
Choice List [Parts Count also]
|
The requirements for this field vary by subcategory as well as the status of Foreign.
The appropriate quality screening level of the device. Accepted quality levels and values for optical devices follow.
• A2 = 0.05
• A3 = 0.08
• A4 = 0.15
• A5 = 0.30
• B1 = 0.60
• B2 = 1.00
• C = 5.00
|
Transfer Mode Type
|
Choice List [Parts Count also]
|
Required only for the Power Coupler / Divider (Tap) subcategory when Foreign is not selected.
The number of nodes. Choices are:
• Multiple Modes
• Single Mode
|
Face Form Type
|
Choice List [Parts Count also]
|
Required only for the Power Coupler / Divider (Tap) subcategory when Foreign is not selected.
The type of face. Choices are:
• APC
• PC
|
Linkage Type
|
Choice List [Parts Count also]
|
Required only for the Power Coupler / Divider (Tap) subcategory when Foreign is not selected.
The type of linkage. Choices are:
• FC
• SC
• ST
|
[Temperature Parameters]
|
Real (Degrees C)
|
Required for most types of the following subcategories: Detector, Isolator, Emitter; and Other Optical Module or Device.
For more information, see Comprehensive Temperature Parameters.
|
[Derating Parameters]
|
---
|
For more information, see Derating Parameters.
|