Calculating LCC Results
Calculating results for an LCC analysis consists of making the appropriate selections and then starting the process.
1. To open the Calculate window, do one of the following:
◦ On the standard toolbar, click Calculate.
◦ Select > .
◦ Press F8.
2. On the Calculation Selection page, select LCC. If this checkbox is cleared, LCC calculations do not run.
4. After entering any additional data for other calculations to perform, click OK to run the requested calculations. The equation that you have inserted for cost is run for each item in the CBS tree.
The Calculation Progress window opens, displaying progress as the calculations run. When they finish, the View Calculation Results window opens.
If calculations for multiple modules are performed, LCC calculation results appear on a
LCC Results page. For more information, see
LCC System Calculation Results.
At the bottom of the page are
Excel and
Print buttons, which you can use to save table results to a
Microsoft Excel spreadsheet or to print them to a printer. For more information, see
Excel and Print Buttons.
5. When finished viewing results, click Close.
You can view these same calculation results again at any time. To do so, select > .